summaryrefslogtreecommitdiff
path: root/src/mainboard/olpc/btest
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/olpc/btest')
-rw-r--r--src/mainboard/olpc/btest/Config.lb170
-rw-r--r--src/mainboard/olpc/btest/Options.lb163
-rw-r--r--src/mainboard/olpc/btest/auto.c193
-rw-r--r--src/mainboard/olpc/btest/chip.h5
-rw-r--r--src/mainboard/olpc/btest/cmos.layout75
-rw-r--r--src/mainboard/olpc/btest/debug.c66
-rw-r--r--src/mainboard/olpc/btest/failover.c34
-rw-r--r--src/mainboard/olpc/btest/irq_tables.c31
-rw-r--r--src/mainboard/olpc/btest/mainboard.c109
-rw-r--r--src/mainboard/olpc/btest/reset.c43
10 files changed, 889 insertions, 0 deletions
diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb
new file mode 100644
index 0000000000..022dc5250a
--- /dev/null
+++ b/src/mainboard/olpc/btest/Config.lb
@@ -0,0 +1,170 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit ./auto.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/amd/gx2
+ register "irqmap" = "0xaa5b"
+ register "setupflash" = "0"
+ device apic_cluster 0 on
+ chip cpu/amd/model_gx2
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ device pci 1.0 on end
+ device pci 1.1 on end
+ chip southbridge/amd/cs5536
+ # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
+ # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
+ # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
+ # Frame Pulse Width = 4clocks
+ # IRQ Data Frames = 17Frames
+ # SIRQ Mode = continous , It would be better if the EC could operate in
+ # Active(Quiet) mode. Save power....
+ # SIRQ Enable = Enabled
+ # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
+ register "lpc_irq" = "0x00001002"
+ register "lpc_serirq_enable" = "0xEFFD0080"
+ register "enable_gpio0_inta" = "1"
+ register "enable_ide_nand_flash" = "1"
+ register "enable_uarta" = "1"
+ register "enable_USBP4_host" = "1"
+ register "audio_irq" = "5"
+ register "usbf4_irq" = "10"
+ register "usbf5_irq" = "10"
+ register "usbf6_irq" = "0"
+ register "usbf7_irq" = "0"
+ device pci d.0 on end # Realtek 8139 LAN
+ device pci f.0 on end # ISA Bridge
+ device pci f.2 on end # IDE Controller
+ device pci f.3 on end # Audio
+ device pci f.4 on end # OHCI
+ device pci f.5 on end # EHCI
+ register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC
+ register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG
+ register "unwanted_vpci[2]" = "0" # End of list has a zero
+ end
+ end
+end
+
diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb
new file mode 100644
index 0000000000..36b0ab956f
--- /dev/null
+++ b/src/mainboard/olpc/btest/Options.lb
@@ -0,0 +1,163 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_STREAM
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses CONFIG_COMPRESSED_ROM_STREAM_NRV2B
+uses CONFIG_COMPRESSED_ROM_STREAM_LZMA
+uses CONFIG_PRECOMPRESSED_ROM_STREAM
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE = 256*1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+## Delay timer options
+##
+default CONFIG_UDELAY_TSC=1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=2
+#object irq_tables.o
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+default FALLBACK_SIZE = 131072
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+default _RAMBASE = 0x00004000
+
+default CONFIG_ROM_STREAM = 1
+
+##
+## The default compiler
+##
+default CROSS_COMPILE=""
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+end
+
diff --git a/src/mainboard/olpc/btest/auto.c b/src/mainboard/olpc/btest/auto.c
new file mode 100644
index 0000000000..f0cd85d042
--- /dev/null
+++ b/src/mainboard/olpc/btest/auto.c
@@ -0,0 +1,193 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/msr.h"
+#include <cpu/amd/gx2def.h>
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
+#include "southbridge/amd/cs5536/cs5536_early_setup.c"
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/gx2/raminit.h"
+
+static inline unsigned int fls(unsigned int x)
+{
+ int r;
+
+ __asm__("bsfl %1,%0\n\t"
+ "jnz 1f\n\t"
+ "movl $32,%0\n"
+ "1:" : "=r" (r) : "g" (x));
+ return r;
+}
+
+
+
+
+/* sdram parameters for OLPC:
+ row address = 13
+ col address = 9
+ banks = 4
+ dimm0size=128MB
+ d0_MB=1 (module banks)
+ d0_cb=4 (component banks)
+ do_psz=4KB (page size)
+ Trc=10 (clocks) (ref2act)
+ Tras=7 (act2pre)
+ Trcd=3 (act2cmd)
+ Trp=3 (pre2act)
+ Trrd=2 (act2act)
+ Tref=17.8ms
+ */
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+ /* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
+ * component Banks (byte 17) * module banks, side (byte 5) *
+ * width in bits (byte 6,7)
+ * = Density per side (byte 31) * number of sides (byte 5) */
+ /* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
+ msr_t msr;
+ unsigned char module_banks, val;
+
+ msr = rdmsr(MC_CF07_DATA);
+
+ /* get module banks (sides) per dimm, SPD byte 5 */
+ module_banks = 1;
+ module_banks >>= 1;
+ msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
+ msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
+
+ /* get component banks per module bank, SPD byte 17 */
+ val = 4;
+ val >>= 2;
+ msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
+ msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
+
+ /* get the module bank density, SPD byte 31 */
+ /* this is multiples of 8 MB */
+ /* actually it is 2^x*4, where x is the value you put in */
+ /* for OLPC, set default size */
+ /* dimm size - hardcoded 128Mb */
+ val = 5;
+ msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
+ msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
+
+ /* page size = 2^col address */
+ val = 2; /* 4096 bytes */
+ msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
+ msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
+
+ print_debug("computed msr.hi ");
+ print_debug_hex32(msr.hi);
+ print_debug("\r\n");
+
+ /* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
+ /* well, it may be close. It's about 200,000 ticks */
+ msr.lo = 0x00003000;
+ wrmsr(MC_CF07_DATA, msr);
+
+ /* timing and mode ... */
+
+ msr = rdmsr(0x20000019);
+
+ /* per standard bios settings */
+
+ msr.hi = 0x18000108;
+ msr.lo =
+ (6<<28) | // cas_lat
+ (10<<24)| // ref2act
+ (7<<20)| // act2pre
+ (3<<16)| // pre2act
+ (3<<12)| // act2cmd
+ (2<<8)| // act2act
+ (2<<6)| // dplwr
+ (2<<4)| // dplrd
+ (3); // dal
+ /* the msr value reported by quanta is very, very different.
+ * we will go with that value for now.
+ */
+ msr.lo = 0x286332a3;
+
+ wrmsr(0x20000019, msr);
+
+}
+
+#include "northbridge/amd/gx2/raminit.c"
+#include "sdram/generic_sdram.c"
+
+#define PLLMSRhi 0x00001490
+#define PLLMSRlo 0x02000030
+#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
+#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
+#include "northbridge/amd/gx2/pll_reset.c"
+#include "cpu/amd/model_gx2/cpureginit.c"
+#include "cpu/amd/model_gx2/syspreinit.c"
+static void msr_init(void)
+{
+ __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
+
+ __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
+ __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
+
+ __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
+ __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
+}
+
+static void gpio_init(void)
+{
+ unsigned long m;
+
+ /* Make sure events enable for gpio 12 is off */
+
+ m = inl(GPIOL_EVENTS_ENABLE);
+ m &= ~GPIOL_12_SET;
+ m |= GPIOL_12_CLEAR;
+ outl(m, GPIOL_EVENTS_ENABLE);
+}
+
+static void main(unsigned long bist)
+{
+ static const struct mem_controller memctrl [] = {
+ {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
+ };
+
+ SystemPreInit();
+ msr_init();
+
+ cs5536_early_setup();
+
+ /* NOTE: must do this AFTER the early_setup!
+ * it is counting on some early MSR setup
+ * for cs5536
+ */
+ cs5536_setup_onchipuart();
+ gpio_init();
+ uart_init();
+ console_init();
+
+ pll_reset();
+
+ cpuRegInit();
+ print_err("done cpuRegInit\n");
+
+ sdram_initialize(1, memctrl);
+
+ /* Check all of memory */
+ //ram_check(0x00000000, 640*1024);
+}
diff --git a/src/mainboard/olpc/btest/chip.h b/src/mainboard/olpc/btest/chip.h
new file mode 100644
index 0000000000..615ed8d2ac
--- /dev/null
+++ b/src/mainboard/olpc/btest/chip.h
@@ -0,0 +1,5 @@
+extern struct chip_operations mainboard_olpc_btest_ops;
+
+struct mainboard_olpc_btest_config {
+ int nothing;
+};
diff --git a/src/mainboard/olpc/btest/cmos.layout b/src/mainboard/olpc/btest/cmos.layout
new file mode 100644
index 0000000000..7b3fe21b49
--- /dev/null
+++ b/src/mainboard/olpc/btest/cmos.layout
@@ -0,0 +1,75 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 1 e 0 dcon_present
+1008 16 h 0 check_sum
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/src/mainboard/olpc/btest/debug.c b/src/mainboard/olpc/btest/debug.c
new file mode 100644
index 0000000000..7eeabdef47
--- /dev/null
+++ b/src/mainboard/olpc/btest/debug.c
@@ -0,0 +1,66 @@
+
+static void print_debug_pci_dev(unsigned dev)
+{
+ print_debug("PCI: ");
+ print_debug_hex8((dev >> 16) & 0xff);
+ print_debug_char(':');
+ print_debug_hex8((dev >> 11) & 0x1f);
+ print_debug_char('.');
+ print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ print_debug_pci_dev(dev);
+ print_debug("\r\n");
+ }
+}
+
+static void dump_pci_device(unsigned dev)
+{
+ int i;
+ print_debug_pci_dev(dev);
+ print_debug("\r\n");
+
+ for(i = 0; i <= 255; i++) {
+ unsigned char val;
+ if ((i & 0x0f) == 0) {
+ print_debug_hex8(i);
+ print_debug_char(':');
+ }
+ val = pci_read_config8(dev, i);
+ print_debug_char(' ');
+ print_debug_hex8(val);
+ if ((i & 0x0f) == 0x0f) {
+ print_debug("\r\n");
+ }
+ }
+}
+
+static void dump_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ dump_pci_device(dev);
+ }
+}
diff --git a/src/mainboard/olpc/btest/failover.c b/src/mainboard/olpc/btest/failover.c
new file mode 100644
index 0000000000..35317fc7b2
--- /dev/null
+++ b/src/mainboard/olpc/btest/failover.c
@@ -0,0 +1,34 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+
+static unsigned long main(unsigned long bist)
+{
+#if 0
+ /* This is the primary cpu how should I boot? */
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+ cpu_reset:
+ asm volatile ("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+ fallback_image:
+#endif
+ return bist;
+}
diff --git a/src/mainboard/olpc/btest/irq_tables.c b/src/mainboard/olpc/btest/irq_tables.c
new file mode 100644
index 0000000000..636f129119
--- /dev/null
+++ b/src/mainboard/olpc/btest/irq_tables.c
@@ -0,0 +1,31 @@
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
+ *
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*2, /* there can be total 2 devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
+ 0x800, /* IRQs devoted exclusively to PCI usage */
+ 0x1078, /* Vendor */
+ 0x2, /* Device */
+ 0, /* Crap (miniport) */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+ {
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
+ {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
+ }
+};
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/olpc/btest/mainboard.c b/src/mainboard/olpc/btest/mainboard.c
new file mode 100644
index 0000000000..35826cb24d
--- /dev/null
+++ b/src/mainboard/olpc/btest/mainboard.c
@@ -0,0 +1,109 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <pc80/mc146818rtc.h>
+#include "chip.h"
+#include "../southbridge/amd/cs5536/cs5536_smbus2.h"
+
+/* Borrowed from mc146818rtc.c */
+
+#define CMOS_READ(addr) ({ \
+ outb((addr),RTC_PORT(0)); \
+ inb(RTC_PORT(1)); \
+ })
+
+#define CMOS_WRITE(val, addr) ({ \
+ outb((addr),RTC_PORT(0)); \
+ outb((val),RTC_PORT(1)); \
+ })
+
+static void write_bit(unsigned char val) {
+
+ unsigned char byte = CMOS_READ(440 / 8);
+
+ /* Don't change it if its already set */
+
+ if ((byte & 1) == (val & 1))
+ return;
+
+ byte &= ~1;
+ byte |= val & 1;
+ CMOS_WRITE(val, 440/8);
+}
+
+static unsigned short _getsmbusbase(void) {
+ unsigned devfn = PCI_DEVFN(0xf, 0);
+ device_t dev = dev_find_slot(0x0, devfn);
+ unsigned long addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+
+ return (unsigned short) (addr & ~1);
+}
+
+static void init_dcon(void) {
+
+ int ret = 1;
+ unsigned short rev = 0;
+ unsigned short iobase = _getsmbusbase();
+
+ printk_debug("CHECKING FOR DCON (%x)\n", iobase);
+
+ /* Get the IO base for the SMBUS */
+
+ rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00);
+
+ if (rev & 0xDC00) {
+ printk_debug("DCON FOUND - REV %x\n", rev);
+
+ /* Enable the DCON */
+ ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069);
+ if (ret != 0)
+ printk_debug("DCON ENABLE FAILED\n", ret);
+ }
+ else
+ printk_debug("DCON NOT FOUND (%x)\n", rev);
+
+ write_bit(rev > 0 ? 1 : 0);
+}
+
+static void init(struct device *dev) {
+/*
+ unsigned bus = 0;
+ unsigned devfn = PCI_DEVFN(0xf, 4);
+ device_t usb = NULL;
+ unsigned char usbirq = 0xa;
+*/
+
+ printk_debug("OLPC BTEST ENTER %s\n", __FUNCTION__);
+
+#if 0
+ /* I can't think of any reason NOT to just set this. If it turns out we want this to be
+ * conditional we can make it a config variable later.
+ */
+
+ printk_debug("%s (%x,%x)SET USB PCI interrupt line to %d\n",
+ __FUNCTION__, bus, devfn, usbirq);
+ usb = dev_find_slot(bus, devfn);
+ if (! usb){
+ printk_err("Could not find USB\n");
+ } else {
+ pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq);
+ }
+#endif
+
+ init_dcon();
+ printk_debug("OLPC BTEST EXIT %s\n", __FUNCTION__);
+}
+
+static void enable_dev(struct device *dev)
+{
+ dev->ops->init = init;
+}
+
+struct chip_operations mainboard_olpc_btest_ops = {
+ CHIP_NAME("olpc btest mainboard ")
+ .enable_dev = enable_dev,
+
+};
diff --git a/src/mainboard/olpc/btest/reset.c b/src/mainboard/olpc/btest/reset.c
new file mode 100644
index 0000000000..5796e17dc8
--- /dev/null
+++ b/src/mainboard/olpc/btest/reset.c
@@ -0,0 +1,43 @@
+#if 0
+//#include "arch/romcc_io.h"
+#include <arch/io.h>
+
+typedef unsigned device_t;
+
+#define PCI_DEV(BUS, DEV, FN) ( \
+ (((BUS) & 0xFF) << 16) | \
+ (((DEV) & 0x1f) << 11) | \
+ (((FN) & 0x7) << 8))
+
+static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outb(value, 0xCFC + (addr & 3));
+}
+
+static void pci_write_config32(device_t dev, unsigned where, unsigned value)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+static unsigned pci_read_config32(device_t dev, unsigned where)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ return inl(0xCFC);
+}
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+ set_bios_reset();
+ pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
+}
+#endif