diff options
Diffstat (limited to 'src/mainboard/pcengines/alix2d/devicetree.cb')
| -rw-r--r-- | src/mainboard/pcengines/alix2d/devicetree.cb | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/src/mainboard/pcengines/alix2d/devicetree.cb b/src/mainboard/pcengines/alix2d/devicetree.cb deleted file mode 100644 index e684a8f1a4..0000000000 --- a/src/mainboard/pcengines/alix2d/devicetree.cb +++ /dev/null @@ -1,44 +0,0 @@ -chip northbridge/amd/lx - device domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power.... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - # How to get these? Boot linux and do this: - # rdmsr 0x51400025 - register "lpc_serirq_enable" = "0x00001002" - # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits - register "lpc_serirq_polarity" = "0x0000EFFD" - # mode is high 10 bits (determined from code) - register "lpc_serirq_mode" = "1" - # Don't yet know how to find this. - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" #0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "1" - register "com1_address" = "0x3F8" - register "com1_irq" = "4" - register "com2_enable" = "1" # Wired on Alix.2D13 only - register "com2_address" = "0x2F8" - register "com2_irq" = "3" - register "unwanted_vpci[0]" = "0x80000900" # Disable VGA controller (not wired) - register "unwanted_vpci[1]" = "0x80007B00" # Disable AC97 controller (not wired) - register "unwanted_vpci[2]" = "0" # End of list has a zero - device pci f.0 on end # ISA Bridge - device pci f.1 on end # Flash controller - device pci f.2 on end # IDE controller - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - - # APIC cluster is late CPU init. - device cpu_cluster 0 on - chip cpu/amd/geode_lx - device lapic 0 on end - end - end -end |