summaryrefslogtreecommitdiff
path: root/src/mainboard/pcengines/apu1
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/pcengines/apu1')
-rw-r--r--src/mainboard/pcengines/apu1/BiosCallOuts.c27
-rw-r--r--src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex248
-rw-r--r--src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex250
-rw-r--r--src/mainboard/pcengines/apu1/Kconfig16
-rw-r--r--src/mainboard/pcengines/apu1/Makefile.inc21
-rw-r--r--src/mainboard/pcengines/apu1/PlatformGnbPcie.c22
-rw-r--r--src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h3
-rw-r--r--src/mainboard/pcengines/apu1/acpi/routing.asl2
-rw-r--r--src/mainboard/pcengines/apu1/board_info.txt4
-rw-r--r--src/mainboard/pcengines/apu1/buildOpts.c17
-rw-r--r--src/mainboard/pcengines/apu1/devicetree.cb62
-rw-r--r--src/mainboard/pcengines/apu1/dsdt.asl3
-rw-r--r--src/mainboard/pcengines/apu1/mainboard.c18
-rw-r--r--src/mainboard/pcengines/apu1/mptable.c2
-rw-r--r--src/mainboard/pcengines/apu1/platform_cfg.h9
-rw-r--r--src/mainboard/pcengines/apu1/romstage.c5
16 files changed, 644 insertions, 65 deletions
diff --git a/src/mainboard/pcengines/apu1/BiosCallOuts.c b/src/mainboard/pcengines/apu1/BiosCallOuts.c
index 74b9f67395..d97fe22153 100644
--- a/src/mainboard/pcengines/apu1/BiosCallOuts.c
+++ b/src/mainboard/pcengines/apu1/BiosCallOuts.c
@@ -19,12 +19,14 @@
#include "AGESA.h"
#include "amdlib.h"
+#include <spd_cache.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include "heapManager.h"
#include "SB800.h"
#include <stdlib.h>
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr);
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
@@ -32,7 +34,7 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
{AGESA_DO_RESET, agesa_Reset },
- {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD, board_ReadSpd_from_cbfs },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopSuccess },
@@ -51,3 +53,26 @@ static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *Config
((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
return AGESA_SUCCESS;
}
+
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+ AGESA_STATUS Status = AGESA_UNSUPPORTED;
+#ifdef __PRE_RAM__
+ AGESA_READ_SPD_PARAMS *info = ConfigPtr;
+ u8 index = 0;
+
+ if (info->MemChannelId > 0)
+ return AGESA_UNSUPPORTED;
+ if (info->SocketId != 0)
+ return AGESA_UNSUPPORTED;
+ if (info->DimmId != 0)
+ return AGESA_UNSUPPORTED;
+
+ /* Read index 0, first SPD_SIZE bytes of spd.bin file. */
+ if (read_spd_from_cbfs((u8*)info->Buffer, index) < 0)
+ die("No SPD data\n");
+
+ Status = AGESA_SUCCESS;
+#endif
+ return Status;
+}
diff --git a/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex b/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex
new file mode 100644
index 0000000000..3558ef138d
--- /dev/null
+++ b/src/mainboard/pcengines/apu1/HYNIX-H5TQ2G83CFR.spd.hex
@@ -0,0 +1,248 @@
+#
+# This file is part of the coreboot project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+# HYNIX-H5TQ2G83CFR
+
+# SPD contents for APU 2GB DDR3 (1333MHz PC1333) soldered down
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x10 = Revision 1.0
+10
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+03
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 3 = 15 Row Address Bits
+# bits[7:6]: reserved
+19
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 1 = 8 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+01
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 0 = 0 bits (no bus width extension)
+# bits[7:5]: reserved
+03
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x01 divisor
+# bits[7:4]: 0x01 dividend
+# 1 / 1 = 1.0 ps
+11
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0c = tCKmin of 1.5 ns = in multiples of MTB
+0C
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 11 - 5 are supported
+7E 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x6C = 13.5ns - DDR3-1333
+6C
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6E = 13.5ns - DDR3-1333
+6C
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x30 = 6ns
+30
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6C = 13.5ns - DDR3-1333
+6C
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x120 = 36ns - DDR3-1333 (see byte 21)
+20
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x28C = 49.5ns - DDR3-1333
+8C
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+00 05
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x00F0 = 30ns - DDR3-1333, 1 KB page size
+00 F0
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 1 = DLL Off mode supported
+83
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 1 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+05
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 2 = Signal Loading
+# bits[3:2]: reserved
+# bits[6:4]: 4 = Die count
+# bit7 : 0 = Standard Monolithic DRAM Device
+42
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 (reserved)
+00
+
+# 40 - 47 (reserved)
+00 00 00 00 00 00 00 00
+
+# 48 - 55 (reserved)
+00 00 00 00 00 00 00 00
+
+# 56 - 59 (reserved)
+00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 71 (reserved)
+00 00 00 00 00 00 00 00
+
+# 72 - 79 (reserved)
+00 00 00 00 00 00 00 00
+
+# 80 - 87 (reserved)
+00 00 00 00 00 00 00 00
+
+# 88 - 95 (reserved)
+00 00 00 00 00 00 00 00
+
+# 96 - 103 (reserved)
+00 00 00 00 00 00 00 00
+
+# 104 - 111 (reserved)
+00 00 00 00 00 00 00 00
+
+# 112 - 116 (reserved)
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x0001 = AMD
+00 01
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+00
+
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x13 = 2013
+# 121 Module ID: Module Manufacture week
+# 0x12 = 12th week
+13 12
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+00 00
diff --git a/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex b/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex
new file mode 100644
index 0000000000..56897fd528
--- /dev/null
+++ b/src/mainboard/pcengines/apu1/HYNIX-H5TQ4G83MFR.spd.hex
@@ -0,0 +1,250 @@
+#
+# This file is part of the coreboot project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+# HYNIX-H5TQ4G83MFR
+
+# SPD contents for APU 2GB DDR3 (1333MHz PC1333) soldered down
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x10 = Revision 1.0
+10
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+04
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 3 = 15 Row Address Bits
+# bits[5:3]: 4 = 16 Row Address Bits
+# bits[7:6]: reserved
+21
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 1 = 8 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+01
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 0 = 0 bits (no bus width extension)
+# bits[7:5]: reserved
+03
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x01 divisor
+# bits[7:4]: 0x01 dividend
+# 1 / 1 = 1.0 ps
+11
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0c = tCKmin of 1.5 ns = in multiples of MTB
+0C
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 11 - 5 are supported
+7E 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x6C = 13.5ns - DDR3-1333
+6C
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6E = 13.5ns - DDR3-1333
+6C
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x30 = 6ns
+30
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6C = 13.5ns - DDR3-1333
+6C
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x120 = 36ns - DDR3-1333 (see byte 21)
+20
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x28C = 49.5ns - DDR3-1333
+8C
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+00 05
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x00F0 = 30ns - DDR3-1333, 1 KB page size
+00 F0
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 1 = DLL Off mode supported
+83
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 1 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+05
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 2 = Signal Loading
+# bits[3:2]: reserved
+# bits[6:4]: 4 = Die count
+# bit7 : 0 = Standard Monolithic DRAM Device
+42
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 (reserved)
+00
+
+# 40 - 47 (reserved)
+00 00 00 00 00 00 00 00
+
+# 48 - 55 (reserved)
+00 00 00 00 00 00 00 00
+
+# 56 - 59 (reserved)
+00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 71 (reserved)
+00 00 00 00 00 00 00 00
+
+# 72 - 79 (reserved)
+00 00 00 00 00 00 00 00
+
+# 80 - 87 (reserved)
+00 00 00 00 00 00 00 00
+
+# 88 - 95 (reserved)
+00 00 00 00 00 00 00 00
+
+# 96 - 103 (reserved)
+00 00 00 00 00 00 00 00
+
+# 104 - 111 (reserved)
+00 00 00 00 00 00 00 00
+
+# 112 - 116 (reserved)
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x0001 = AMD
+00 01
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+00
+
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x13 = 2013
+# 121 Module ID: Module Manufacture week
+# 0x12 = 12th week
+13 12
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+00 00
diff --git a/src/mainboard/pcengines/apu1/Kconfig b/src/mainboard/pcengines/apu1/Kconfig
index 5cb543b686..9409bc3cd1 100644
--- a/src/mainboard/pcengines/apu1/Kconfig
+++ b/src/mainboard/pcengines/apu1/Kconfig
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki@gmail.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -17,27 +18,28 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
-if BOARD_AMD_PERSIMMON
+if BOARD_PCENGINES_APU1
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select CPU_AMD_AGESA_FAMILY14
select NORTHBRIDGE_AMD_AGESA_FAMILY14
select SOUTHBRIDGE_AMD_CIMX_SB800
+ select SUPERIO_NUVOTON_NCT5104D
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
- select HAVE_ACPI_RESUME
+ #select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_4096
- select GFXUMA
+ select BOARD_ROMSIZE_KB_2048
+ select SPD_CACHE
config MAINBOARD_DIR
string
- default amd/persimmon
+ default pcengines/apu1
config MAINBOARD_PART_NUMBER
string
- default "Persimmon"
+ default "APU1"
config HW_MEM_HOLE_SIZEK
hex
@@ -80,4 +82,4 @@ config DRIVERS_PS2_KEYBOARD
bool
default n
-endif # BOARD_AMD_PERSIMMON
+endif # BOARD_PCENGINES_APU1
diff --git a/src/mainboard/pcengines/apu1/Makefile.inc b/src/mainboard/pcengines/apu1/Makefile.inc
index c82834ceb9..749a6ad144 100644
--- a/src/mainboard/pcengines/apu1/Makefile.inc
+++ b/src/mainboard/pcengines/apu1/Makefile.inc
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
+# Copyright (C) 2013 Sage Electronic Engineering, LLC
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -31,3 +32,23 @@ romstage-y += PlatformGnbPcie.c
ramstage-y += buildOpts.c
ramstage-y += BiosCallOuts.c
ramstage-y += PlatformGnbPcie.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = HYNIX-H5TQ2G83CFR HYNIX-H5TQ4G83MFR
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do echo -e -n "\\x$$c"; \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := 0xab
diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcie.c b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c
index f2fe96bf52..26cdc4ad34 100644
--- a/src/mainboard/pcengines/apu1/PlatformGnbPcie.c
+++ b/src/mainboard/pcengines/apu1/PlatformGnbPcie.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,8 +24,6 @@
#include <northbridge/amd/agesa/agesawrapper.h>
#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h>
-#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
-
/**
* OemCustomizeInitEarly
*
@@ -53,25 +52,25 @@ PCIe_PORT_DESCRIPTOR PortList [] = {
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
},
// Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5)
},
// Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
{
0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
},
// Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
{
0,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0)
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
},
// Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
{
@@ -84,18 +83,11 @@ PCIe_PORT_DESCRIPTOR PortList [] = {
PCIe_DDI_DESCRIPTOR DdiList [] = {
// Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...)
{
- 0, //Descriptor flags
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
//PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
- {ConnectorTypeLvds, Aux1, Hdp1}
+ {ConnectorTypeDP, Aux1, Hdp1}
},
- // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
- {
- DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
- //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
- {ConnectorTypeDP, Aux2, Hdp2}
- }
};
PCIe_COMPLEX_DESCRIPTOR Brazos = {
diff --git a/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h
index 4a01875920..89a41a1e18 100644
--- a/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h
+++ b/src/mainboard/pcengines/apu1/PlatformGnbPcieComplex.h
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -50,7 +51,7 @@
#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7
-#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
diff --git a/src/mainboard/pcengines/apu1/acpi/routing.asl b/src/mainboard/pcengines/apu1/acpi/routing.asl
index 0395700221..cd38608797 100644
--- a/src/mainboard/pcengines/apu1/acpi/routing.asl
+++ b/src/mainboard/pcengines/apu1/acpi/routing.asl
@@ -73,7 +73,7 @@ Scope(\_SB) {
/* OHCI, dev 18, 19, 22 func 0
* EHCI, dev 18, 19, 22 func 2 */
- Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */
+ Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */
Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */
Package(){0x0013FFFF, 0, INTC, 0 },
diff --git a/src/mainboard/pcengines/apu1/board_info.txt b/src/mainboard/pcengines/apu1/board_info.txt
index 85cb19a9d9..6c824dfff3 100644
--- a/src/mainboard/pcengines/apu1/board_info.txt
+++ b/src/mainboard/pcengines/apu1/board_info.txt
@@ -1,5 +1,5 @@
-Board name: DBFT1-00-EVAL-KT (Persimmon)
-Category: eval
+Board name: APU1
+Category: half
ROM protocol: SPI
ROM socketed: n
Flashrom support: y
diff --git a/src/mainboard/pcengines/apu1/buildOpts.c b/src/mainboard/pcengines/apu1/buildOpts.c
index 9cf2a19941..cfc9d3deb0 100644
--- a/src/mainboard/pcengines/apu1/buildOpts.c
+++ b/src/mainboard/pcengines/apu1/buildOpts.c
@@ -209,7 +209,7 @@
//#define BLDCFG_ECC_SYNC_FLOOD 0
//#define BLDCFG_ECC_SYMBOL_SIZE 0
//#define BLDCFG_1GB_ALIGN FALSE
-#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_NONE
#define BLDCFG_UMA_ALLOCATION_SIZE 0
#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
@@ -382,8 +382,19 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
// Byte6Seed, Byte7Seed, ByteEccSeed)
// Specifies the write leveling seed for a channel of a socket.
//
- NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
- NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM),
+
+ // APU soldered down memory uses memory CLK0 and CLK1 on CS0
+ MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+
+ // APU soldered down memory requires different seeds
+#define WLSEED 0x08
+#define RXSEED 0x40
+ WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED),
+ HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED),
+
PSO_END
};
diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb
index 2f6bb14fc8..5f6f9c9ee7 100644
--- a/src/mainboard/pcengines/apu1/devicetree.cb
+++ b/src/mainboard/pcengines/apu1/devicetree.cb
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Kyösti Mälkki <kyosti.malkki@gmail.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -28,44 +29,65 @@ chip northbridge/amd/agesa/family14/root_complex
# device pci 18.0 on # northbridge
chip northbridge/amd/agesa/family14 # PCI side of HT root complex
device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
+ device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456]
device pci 4.0 on end # PCIE P2P bridge on-board NIC
- device pci 5.0 off end # PCIE P2P bridge
+ device pci 5.0 on end # PCIE P2P bridge
device pci 6.0 on end # PCIE P2P bridge PCIe slot
- device pci 7.0 off end # PCIE P2P bridge
- device pci 8.0 off end # NB/SB Link P2P bridge
+ device pci 7.0 on end # PCIE P2P bridge
+ device pci 8.0 on end # NB/SB Link P2P bridge
end # agesa northbridge
chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
device pci 11.0 on end # SATA
device pci 12.0 on end # OHCI USB 0-4
+ device pci 12.1 on end # OHCI USB 0-4
device pci 12.2 on end # EHCI USB 0-4
device pci 13.0 on end # OHCI USB 5-9
+ device pci 13.1 on end # OHCI USB 5-9
device pci 13.2 on end # EHCI USB 5-9
device pci 14.0 on # SM
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
end # SM
device pci 14.1 on end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
+ chip superio/nuvoton/nct5104d
+ register "irq_trigger_type" = "0"
+ device pnp 2e.0 off end
+ device pnp 2e.2 on
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 on
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.10 off
+ io 0x60 = 0x3e8
+ irq 0x70 = 4
+ end
+ device pnp 2e.11 off
+ io 0x60 = 0x2e8
+ irq 0x70 = 3
+ end
+ device pnp 2e.8 off end
+ device pnp 2e.f off end
+ device pnp 2e.7 off end
+ device pnp 2e.107 off end
+ device pnp 2e.607 off end
+ device pnp 2e.e off end
+ end
end #LPC
device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
- device pci 14.5 off end # OHCI FS/LS USB
- device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
- device pci 15.0 off end # PCIe PortA
+ device pci 14.5 on end # OHCI FS/LS USB
+ #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
+ device pci 15.0 on end # PCIe PortA
device pci 15.1 off end # PCIe PortB
device pci 15.2 off end # PCIe PortC
device pci 15.3 off end # PCIe PortD
- device pci 16.0 off end # OHCI USB 10-13
- device pci 16.2 off end # EHCI USB 10-13
- register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ device pci 16.0 on end # OHCI USB 10-13
+ device pci 16.2 on end # EHCI USB 10-13
+ register "gpp_configuration" = "0"
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
-
end #southbridge/amd/cimx/sb800
# end # device pci 18.0
# These seem unnecessary
@@ -78,12 +100,6 @@ chip northbridge/amd/agesa/family14/root_complex
device pci 18.6 on end
device pci 18.7 on end
- register "spdAddrLookup" = "
- {
- { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
- { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
- }"
-
end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
end #domain
end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/pcengines/apu1/dsdt.asl b/src/mainboard/pcengines/apu1/dsdt.asl
index 25520b2368..d3b29203bc 100644
--- a/src/mainboard/pcengines/apu1/dsdt.asl
+++ b/src/mainboard/pcengines/apu1/dsdt.asl
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,7 +23,7 @@ DefinitionBlock (
"DSDT.AML", /* Output filename */
"DSDT", /* Signature */
0x02, /* DSDT Revision, needs to be 2 for 64bit */
- "AMD ", /* OEMID */
+ "PCENG ", /* OEMID */
"COREBOOT", /* TABLE ID */
0x00010001 /* OEM Revision */
)
diff --git a/src/mainboard/pcengines/apu1/mainboard.c b/src/mainboard/pcengines/apu1/mainboard.c
index 1096f050e8..cf0d82300e 100644
--- a/src/mainboard/pcengines/apu1/mainboard.c
+++ b/src/mainboard/pcengines/apu1/mainboard.c
@@ -2,7 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
- * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -48,7 +48,7 @@ void set_pcie_dereset(void);
* These values are used by the PCI configuration space,
* MP Tables. TODO: Make ACPI use these values too.
*
- * The Persimmon PCI INTA/B/C/D pins are connected to
+ * The PCI INTA/B/C/D pins are connected to
* FCH pins INTE/F/G/H on the schematic so these need
* to be routed as well.
*/
@@ -56,13 +56,13 @@ static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
/* INTA# - INTH# */
[0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
/* Misc-nil,0,1,2, INT from Serial irq */
- [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
/* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
[0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
/* IMC INT0 - 5 */
[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
/* USB Devs 18/19/20/22 INTA-C */
- [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
+ [0x30] = 0x0A,0x0B,0x0A,0x0B,0x1F,0x1F,0x0A,
/* IDE, SATA */
[0x40] = 0x0B,0x0B,
/* GPPInt0 - 3 */
@@ -97,8 +97,8 @@ static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
* use PIC IRQ 10 if it uses PIN A for its hardware INT.
*/
/*
- * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H
- * but because PCI INT_PIN swizzling isnt implemented to match
+ * The PCI slot INTA/B/C/D connected to PIRQE/F/G/H
+ * but because of PCI INT_PIN swizzle isnt implemented to match
* the IDSEL (dev 3) of the slot, the table is adjusted for the
* swizzle and INTA is connected to PIRQH so PINA/B/C/D on
* off-chip devices should get mapped to PIRQH/E/F/G.
@@ -107,7 +107,9 @@ static const struct pirq_struct mainboard_pirq_data[] = {
/* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
{GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
{NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */
- {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */
+ {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 05.0 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 06.0 */
+ {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* miniPCIe: 07.0 */
{SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
{OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
{EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
@@ -118,6 +120,7 @@ static const struct pirq_struct mainboard_pirq_data[] = {
{HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
{SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */
{OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */
+ {SB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* miniPCIe: 15.0 */
{OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */
{EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */
};
@@ -147,7 +150,6 @@ void set_pcie_dereset(void)
{
}
-
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
diff --git a/src/mainboard/pcengines/apu1/mptable.c b/src/mainboard/pcengines/apu1/mptable.c
index 0cf57bdcce..18bdb97d30 100644
--- a/src/mainboard/pcengines/apu1/mptable.c
+++ b/src/mainboard/pcengines/apu1/mptable.c
@@ -111,6 +111,8 @@ static void *smp_write_config_table(void *v)
/* on board NIC & Slot PCIE */
PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x3, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x4, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
/* PCI slots */
device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
diff --git a/src/mainboard/pcengines/apu1/platform_cfg.h b/src/mainboard/pcengines/apu1/platform_cfg.h
index 097c835fa4..08051ec5b7 100644
--- a/src/mainboard/pcengines/apu1/platform_cfg.h
+++ b/src/mainboard/pcengines/apu1/platform_cfg.h
@@ -21,6 +21,9 @@
#ifndef _PLATFORM_CFG_H_
#define _PLATFORM_CFG_H_
+/* APU has no legacy P/S2 controller */
+#define LEGACY_FREE 0 /* setting legacy free disables I/O access to 0x3F8 */
+
/**
* @def BIOS_SIZE
* BIOS_SIZE_{1,2,4,8,16}M
@@ -75,7 +78,7 @@
* PCI SLOT 3 define at BIT3
* PCI SLOT 4 define at BIT4
*/
-#define PCI_CLOCK_CTRL 0x07
+#define PCI_CLOCK_CTRL 0x1F
/**
* @def SATA_CONTROLLER
@@ -182,7 +185,7 @@
* GPP_CFGMODE_X2110
* GPP_CFGMODE_X1111
*/
-#define GPP_CFGMODE GPP_CFGMODE_X1111
+#define GPP_CFGMODE GPP_CFGMODE_X4000
/**
* @def NB_SB_GEN2
@@ -203,7 +206,7 @@
* TRUE - ports visible always, even port empty
* FALSE - ports invisible if port empty
*/
-#define SB_GPP_UNHIDE_PORTS FALSE
+#define SB_GPP_UNHIDE_PORTS TRUE
/**
* @def GEC_CONFIG
diff --git a/src/mainboard/pcengines/apu1/romstage.c b/src/mainboard/pcengines/apu1/romstage.c
index d90a39dc01..c555536770 100644
--- a/src/mainboard/pcengines/apu1/romstage.c
+++ b/src/mainboard/pcengines/apu1/romstage.c
@@ -39,7 +39,11 @@
#include "cbmem.h"
#include <cpu/amd/mtrr.h>
#include <cpu/amd/agesa/s3_resume.h>
+#include <superio/nuvoton/common/nuvoton.h>
+#include <superio/nuvoton/nct5104d/nct5104d.h>
+#define SIO_PORT 0x2e
+#define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
@@ -62,6 +66,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sb_Poweron_Init();
post_code(0x31);
+ nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
}