summaryrefslogtreecommitdiff
path: root/src/mainboard/sunw/ultra40
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/sunw/ultra40')
-rw-r--r--src/mainboard/sunw/ultra40/Config.lb386
-rw-r--r--src/mainboard/sunw/ultra40/Options.lb278
-rw-r--r--src/mainboard/sunw/ultra40/auto.c197
-rw-r--r--src/mainboard/sunw/ultra40/cache_as_ram_auto.c271
-rw-r--r--src/mainboard/sunw/ultra40/chip.h6
-rw-r--r--src/mainboard/sunw/ultra40/cmos.layout98
-rw-r--r--src/mainboard/sunw/ultra40/failover.c110
-rw-r--r--src/mainboard/sunw/ultra40/get_bus_conf.c271
-rw-r--r--src/mainboard/sunw/ultra40/irq_tables.c178
-rw-r--r--src/mainboard/sunw/ultra40/mainboard.c12
-rw-r--r--src/mainboard/sunw/ultra40/mptable.c236
-rw-r--r--src/mainboard/sunw/ultra40/resourcemap.c267
12 files changed, 2310 insertions, 0 deletions
diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb
new file mode 100644
index 0000000000..6b41829017
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/Config.lb
@@ -0,0 +1,386 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_STREAM = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end
+
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+#needed by irq_tables and mptable and acpi_tables
+object get_bus_conf.o
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ makerule ./auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+ end
+ else
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+ end
+
+else
+ ##
+ ## Romcc output
+ ##
+ makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ end
+
+ makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+ end
+
+ makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ end
+
+ makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ end
+
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+if USE_DCACHE_RAM
+else
+ ### Should this be in the northbridge code?
+ mainboardinit arch/i386/lib/cpu_reset.inc
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit southbridge/nvidia/ck804/id.inc
+ldscript /southbridge/nvidia/ck804/id.lds
+
+##
+## ROMSTRAP table for CK804
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit southbridge/nvidia/ck804/romstrap.inc
+ ldscript /southbridge/nvidia/ck804/romstrap.lds
+end
+
+
+
+if USE_DCACHE_RAM
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ if USE_DCACHE_RAM
+ else
+ mainboardinit ./failover.inc
+ end
+end
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ initobject auto.o
+ else
+ mainboardinit ./auto.inc
+ end
+
+else
+ # ROMCC
+ mainboardinit cpu/x86/fpu/enable_fpu.inc
+ mainboardinit cpu/x86/mmx/enable_mmx.inc
+ mainboardinit cpu/x86/sse/enable_sse.inc
+ mainboardinit ./auto.inc
+ mainboardinit cpu/x86/sse/disable_sse.inc
+ mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+# sample config for tyan/s2895
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_940
+ device apic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8 #mc0
+ device pci 18.0 on
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
+ device pci 0.0 on end # HT
+ device pci 1.0 on # LPC
+ chip superio/smsc/lpc47b397
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.8 on # HW Monitor
+ io 0x60 = 0x290
+ chip drivers/generic/generic # LM95221 CPU temp
+ device i2c 2b on end
+ end
+ chip drivers/generic/generic # EMCT03
+ device i2c 54 on end
+ end
+ end
+ device pnp 2e.a on # RT
+ io 0x60 = 0x400
+ end
+ end
+ end
+ device pci 1.1 on # SM 0
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-0
+ device i2c 54 on end
+ end
+ chip drivers/generic/generic #dimm 1-0-1
+ device i2c 55 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-0
+ device i2c 56 on end
+ end
+ chip drivers/generic/generic #dimm 1-1-1
+ device i2c 57 on end
+ end
+ end # SM
+ device pci 1.1 on # SM 1
+#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
+# chip drivers/generic/generic #PCIXA Slot1
+# device i2c 50 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot1
+# device i2c 51 on end
+# end
+# chip drivers/generic/generic #PCIXB Slot2
+# device i2c 52 on end
+# end
+# chip drivers/generic/generic #PCI Slot1
+# device i2c 53 on end
+# end
+# chip drivers/generic/generic #Master CK804 PCI-E
+# device i2c 54 on end
+# end
+# chip drivers/generic/generic #Slave CK804 PCI-E
+# device i2c 55 on end
+# end
+ chip drivers/generic/generic #MAC EEPROM
+ device i2c 51 on end
+ end
+
+ end # SM
+ device pci 2.0 on end # USB 1.1
+ device pci 2.1 on end # USB 2
+ device pci 4.0 on end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 on end # IDE
+ device pci 7.0 on end # SATA 1
+ device pci 8.0 on end # SATA 0
+ device pci 9.0 on end # PCI
+ device pci a.0 on end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 off end # PCI E 1
+ device pci e.0 on end # PCI E 0
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ register "sata0_enable" = "1"
+ register "sata1_enable" = "1"
+# register "nic_rom_address" = "0xfff80000" # 64k
+# register "raid_rom_address" = "0xfff90000"
+ register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
+ register "mac_eeprom_addr" = "0x51"
+ end
+ end # device pci 18.0
+ device pci 18.0 on end # Link 1
+ device pci 18.0 on
+ # devices on link 2, link 2 == LDT 2
+ chip southbridge/amd/amd8131
+ # the on/off keyword is mandatory
+ device pci 0.0 on end
+ device pci 0.1 on end
+ device pci 1.0 on
+ chip drivers/pci/onboard
+ device pci 6.0 on end # lsi scsi
+ device pci 6.1 on end
+ end
+ end
+ device pci 1.1 on end
+ end
+ end # device pci 18.0
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end # mc0
+
+ chip northbridge/amd/amdk8
+ device pci 19.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/nvidia/ck804
+ device pci 0.0 on end # HT
+ device pci 1.0 on end # LPC
+ device pci 1.1 off end # SM
+ device pci 2.0 off end # USB 1.1
+ device pci 2.1 off end # USB 2
+ device pci 4.0 off end # ACI
+ device pci 4.1 off end # MCI
+ device pci 6.0 off end # IDE
+ device pci 7.0 off end # SATA 1
+ device pci 8.0 off end # SATA 0
+ device pci 9.0 off end # PCI
+ device pci a.0 on end # NIC
+ device pci b.0 off end # PCI E 3
+ device pci c.0 off end # PCI E 2
+ device pci d.0 off end # PCI E 1
+ device pci e.0 on end # PCI E 0
+# register "nic_rom_address" = "0xfff80000" # 64k
+ register "mac_eeprom_smbus" = "3"
+ register "mac_eeprom_addr" = "0x51"
+ end
+ end # device pci 19.0
+
+ device pci 19.0 on end
+ device pci 19.0 on end
+ device pci 19.1 on end
+ device pci 19.2 on end
+ device pci 19.3 on end
+ end
+ end # PCI domain
+
+# chip drivers/generic/debug
+# device pnp 0.0 off end # chip name
+# device pnp 0.1 off end # pci_regs_all
+# device pnp 0.2 off end # mem
+# device pnp 0.3 off end # cpuid
+# device pnp 0.4 on end # smbus_regs_all
+# device pnp 0.5 off end # dual core msr
+# device pnp 0.6 off end # cache size
+# device pnp 0.7 off end # tsc
+# end
+end #root_complex
diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb
new file mode 100644
index 0000000000..c3f8ba3f8c
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/Options.lb
@@ -0,0 +1,278 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses K8_HW_MEM_HOLE_SIZEK
+uses K8_HT_FREQ_1G_SUPPORT
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses CONFIG_USE_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+#512K bytes
+#default ROM_SIZE=524288
+
+#1M bytes
+default ROM_SIZE=1048576
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+#default FALLBACK_SIZE=131072
+#256K
+default FALLBACK_SIZE=0x40000
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=4
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_LOGICAL_CPUS=1
+
+#CHIP_NAME ?
+#default CONFIG_CHIP_NAME=1
+
+#1G memory hole
+default K8_HW_MEM_HOLE_SIZEK=0x100000
+
+#Opteron K8 1G HT Support
+default K8_HT_FREQ_1G_SUPPORT=1
+
+##HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0x0
+
+##real SB Unit ID, default is 0x20, mean dont touch it at last
+#default HT_CHAIN_END_UNITID_BASE=0x0
+
+#make the SB HT chain on bus 0, default is not (0)
+default K8_SB_HT_CHAIN_ON_BUS0=2
+
+##only offset for SB chain?, default is yes(1)
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#VGA
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xcf000
+default DCACHE_RAM_SIZE=0x1000
+default CONFIG_USE_INIT=0
+
+default ENABLE_APIC_EXT_ID=1
+default APIC_ID_OFFSET=0x10
+default LIFT_BSP_APIC_ID=0
+
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="s2895"
+default MAINBOARD_VENDOR="Tyan"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_STREAM = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
diff --git a/src/mainboard/sunw/ultra40/auto.c b/src/mainboard/sunw/ultra40/auto.c
new file mode 100644
index 0000000000..bf65cbe6a7
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/auto.c
@@ -0,0 +1,197 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+//#define K8_HT_FREQ_1G_SUPPORT 1
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include <cpu/amd/model_fxx_msr.h>
+#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "cpu/amd/dualcore/dualcore.c"
+
+#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
+
+static void hard_reset(void)
+{
+ set_bios_reset();
+
+ /* full reset */
+ outb(0x0a, 0x0cf9);
+ outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+ set_bios_reset();
+#if 1
+ /* link reset */
+ outb(0x02, 0x0cf9);
+ outb(0x06, 0x0cf9);
+#endif
+}
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+
+#define SUPERIO_GPIO_IO_BASE 0x400
+
+static void sio_gpio_setup(void){
+
+ unsigned value;
+
+// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c
+
+#if 1
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
+#endif
+
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#define K8_4RANK_DIMM_SUPPORT 1
+
+#include "northbridge/amd/amdk8/raminit.c"
+#if 0
+ #define ENABLE_APIC_EXT_ID 1
+ #define APIC_ID_OFFSET 0x10
+ #define LIFT_BSP_APIC_ID 0
+#else
+ #define ENABLE_APIC_EXT_ID 0
+#endif
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+/* maybe does not want the default */
+#include "resourcemap.c"
+
+
+#define FIRST_CPU 1
+#define SECOND_CPU 1
+#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
+
+#define CK804_NUM 2
+#define CK804B_BUSN 0x80
+#define CK804_USE_NIC 1
+#define CK804_USE_ACI 1
+#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
+
+//set GPIO to input mode
+#define CK804_MB_SETUP \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
+
+#include "southbridge/nvidia/ck804/ck804_early_setup.c"
+
+
+static void main(unsigned long bist)
+{
+ static const struct mem_controller cpu[] = {
+#if FIRST_CPU
+ {
+ .node_id = 0,
+ .f0 = PCI_DEV(0, 0x18, 0),
+ .f1 = PCI_DEV(0, 0x18, 1),
+ .f2 = PCI_DEV(0, 0x18, 2),
+ .f3 = PCI_DEV(0, 0x18, 3),
+ .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
+ .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
+ },
+#endif
+#if SECOND_CPU
+ {
+ .node_id = 1,
+ .f0 = PCI_DEV(0, 0x19, 0),
+ .f1 = PCI_DEV(0, 0x19, 1),
+ .f2 = PCI_DEV(0, 0x19, 2),
+ .f3 = PCI_DEV(0, 0x19, 3),
+ .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
+ .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
+ },
+#endif
+ };
+
+ int needs_reset;
+
+ if (bist == 0) {
+ k8_init_and_stop_secondaries();
+ }
+
+ // post_code(0x32);
+
+ lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ sio_gpio_setup();
+
+ setup_s2895_resource_map();
+
+ needs_reset = setup_coherent_ht_domain();
+
+ needs_reset |= ht_setup_chains_x();
+
+ needs_reset |= ck804_early_setup_x();
+
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
+
+
+ enable_smbus();
+
+ memreset_setup();
+ sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+
+
+}
diff --git a/src/mainboard/sunw/ultra40/cache_as_ram_auto.c b/src/mainboard/sunw/ultra40/cache_as_ram_auto.c
new file mode 100644
index 0000000000..299f345b71
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/cache_as_ram_auto.c
@@ -0,0 +1,271 @@
+#define ASSEMBLY 1
+#define __ROMCC__
+
+
+#define K8_ALLOCATE_IO_RANGE 1
+//#define K8_SCAN_PCI_BUS 1
+
+
+#define K8_4RANK_DIMM_SUPPORT 1
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1)
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+
+#define SUPERIO_GPIO_IO_BASE 0x400
+
+static void sio_gpio_setup(void){
+
+ unsigned value;
+
+ /*Enable onboard scsi*/
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c);
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1)));
+
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+ /* tyan does not want the default */
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#define CK804_NUM 2
+#define CK804_USE_NIC 1
+#define CK804_USE_ACI 1
+
+#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
+
+//set GPIO to input mode
+#define CK804_MB_SETUP \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \
+ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/
+
+#include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+
+#if USE_FALLBACK_IMAGE == 1
+
+#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+static void sio_setup(void)
+{
+
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
+
+ byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<29)|(1<<0);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
+
+#if 1
+ lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
+
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
+ value &= 0xbf;
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
+#endif
+
+}
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ unsigned last_boot_normal_x = last_boot_normal();
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ __asm__ volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
+ );
+
+ fallback_image:
+ ;
+}
+#endif
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+#if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+#endif
+ real_main(bist, cpu_init_detectedx);
+
+}
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ static const uint16_t spd_addr [] = {
+ (0xa<<3)|0, (0xa<<3)|2, 0, 0,
+ (0xa<<3)|1, (0xa<<3)|3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ (0xa<<3)|4, (0xa<<3)|6, 0, 0,
+ (0xa<<3)|5, (0xa<<3)|7, 0, 0,
+#endif
+ };
+
+ int needs_reset;
+ unsigned bsp_apicid = 0;
+
+ struct mem_controller ctrl[8];
+ unsigned nodes;
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx);
+ }
+
+ lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ setup_s2895_resource_map();
+
+ needs_reset = setup_coherent_ht_domain();
+
+ wait_all_core0_started();
+#if CONFIG_LOGICAL_CPUS==1
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
+#endif
+
+ needs_reset |= ht_setup_chains_x();
+
+ needs_reset |= ck804_early_setup_x();
+
+ if (needs_reset) {
+ print_info("ht reset -\r\n");
+ soft_reset();
+ }
+
+ allow_all_aps_stop(bsp_apicid);
+
+ nodes = get_nodes();
+ //It's the time to set ctrl now;
+ fill_mem_ctrl(nodes, ctrl, spd_addr);
+
+ enable_smbus();
+
+ memreset_setup();
+ sdram_initialize(nodes, ctrl);
+
+ post_cache_as_ram();
+}
diff --git a/src/mainboard/sunw/ultra40/chip.h b/src/mainboard/sunw/ultra40/chip.h
new file mode 100644
index 0000000000..350f4a6369
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/chip.h
@@ -0,0 +1,6 @@
+extern struct chip_operations mainboard_tyan_s2895_ops;
+
+struct mainboard_tyan_s2895_config {
+// int fixup_scsi;
+// int fixup_vga;
+};
diff --git a/src/mainboard/sunw/ultra40/cmos.layout b/src/mainboard/sunw/ultra40/cmos.layout
new file mode 100644
index 0000000000..5eb88b9a5a
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 DDR400
+8 1 DDR333
+8 2 DDR266
+8 3 DDR200
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/sunw/ultra40/failover.c b/src/mainboard/sunw/ultra40/failover.c
new file mode 100644
index 0000000000..537abd43f4
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/failover.c
@@ -0,0 +1,110 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+
+#include <device/pnp_def.h>
+
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+
+#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c"
+#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c"
+
+#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT)
+
+#define SUPERIO_GPIO_IO_BASE 0x400
+
+static void sio_setup(void)
+{
+
+ unsigned value;
+ uint32_t dword;
+ uint8_t byte;
+
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400);
+
+ byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b);
+ byte |= 0x20;
+ pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte);
+
+ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0);
+ dword |= (1<<29)|(1<<0);
+ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
+
+#if 1
+ lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE);
+
+ value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77);
+ value &= 0xbf;
+ lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value);
+#endif
+
+}
+
+
+#if CONFIG_LOGICAL_CPUS==1
+#include "cpu/amd/dualcore/dualcore_id.c"
+#else
+#include "cpu/amd/model_fxx/node_id.c"
+#endif
+
+
+static unsigned long main(unsigned long bist)
+{
+ /* Is this a cpu only reset? */
+ if (early_mtrr_init_detected()) {
+ if (last_boot_normal()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Is this a secondary cpu? */
+ if (!boot_cpu()) {
+ if (last_boot_normal()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+ fallback_image:
+ return bist;
+}
diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c
new file mode 100644
index 0000000000..3decafb71e
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/get_bus_conf.c
@@ -0,0 +1,271 @@
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+
+// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
+//busnum is default
+ unsigned char bus_isa;
+ unsigned char bus_ck804_0; //1
+ unsigned char bus_ck804_1; //2
+ unsigned char bus_ck804_2; //3
+ unsigned char bus_ck804_3; //4
+ unsigned char bus_ck804_4; //5
+ unsigned char bus_ck804_5; //6
+ unsigned char bus_8131_0; //7
+ unsigned char bus_8131_1; //8
+ unsigned char bus_8131_2; //9
+ unsigned char bus_ck804b_0;//a
+ unsigned char bus_ck804b_1;//b
+ unsigned char bus_ck804b_2;//c
+ unsigned char bus_ck804b_3;//d
+ unsigned char bus_ck804b_4;//e
+ unsigned char bus_ck804b_5;//f
+ unsigned apicid_ck804;
+ unsigned apicid_8131_1;
+ unsigned apicid_8131_2;
+ unsigned apicid_ck804b;
+
+unsigned sblk;
+unsigned pci1234[] =
+{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ 0x0000ff0,
+ 0x0000ff0,
+ 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0,
+// 0x0000ff0
+};
+unsigned hc_possible_num;
+unsigned sbdn;
+unsigned hcdn[] =
+{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
+ 0x20202020,
+ 0x20202020,
+ 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+// 0x20202020,
+};
+unsigned sbdn3;
+unsigned sbdnb;
+
+extern void get_sblk_pci1234(void);
+
+static unsigned get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+
+ unsigned apicid_base;
+
+ device_t dev;
+
+ if(get_bus_conf_done==1) return; //do it only once
+
+ get_bus_conf_done = 1;
+
+ hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]);
+
+ get_sblk_pci1234();
+
+ sbdn = (hcdn[0] & 0xff); // first byte of first chain
+
+ sbdn3 = (hcdn[1] & 0xff);
+
+ sbdnb = (hcdn[2] & 0xff); // first byte of second chain
+
+// bus_ck804_0 = node_link_to_bus(0, sblk);
+ bus_ck804_0 = (pci1234[0] >> 16) & 0xff;
+
+ /* CK804 */
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0));
+ if (dev) {
+ bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+#if 0
+ bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804_2++;
+#else
+ bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804_5++;
+#endif
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09);
+
+ bus_ck804_1 = 2;
+#if 0
+ bus_ck804_2 = 3;
+#else
+ bus_ck804_5 = 3;
+#endif
+
+ }
+#if 0
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0));
+ if (dev) {
+ bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804_3++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b);
+
+ bus_ck804_3 = bus_ck804_2+1;
+ }
+
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0));
+ if (dev) {
+ bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804_4++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c);
+
+ bus_ck804_4 = bus_ck804_3+1;
+ }
+
+
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0));
+ if (dev) {
+ bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804_5++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d);
+
+ bus_ck804_5 = bus_ck804_4+1;
+ }
+#endif
+
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0));
+ if (dev) {
+ bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ }
+ else {
+ printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e);
+ }
+
+ bus_8131_0 = (pci1234[1] >> 16) & 0xff;
+ /* 8131-1 */
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
+ if (dev) {
+ bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_8131_2++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
+
+ bus_8131_1 = bus_8131_0+1;
+ bus_8131_2 = bus_8131_0+2;
+ }
+ /* 8131-2 */
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
+ if (dev) {
+ bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
+
+ bus_8131_2 = bus_8131_1+1;
+ }
+
+ /* CK804b */
+
+ if(pci1234[2] & 0xf) { //if the second cpu is installed
+ bus_ck804b_0 = (pci1234[2]>>16) & 0xff;
+#if 0
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0));
+ if (dev) {
+ bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804b_2++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09);
+
+ bus_ck804b_1 = bus_ck804b_0+1;
+ bus_ck804b_2 = bus_ck804b_0+2;
+ }
+
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0));
+ if (dev) {
+ bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804b_3++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b);
+
+ bus_ck804b_2 = bus_ck804b_0+1;
+ bus_ck804b_3 = bus_ck804b_0+2;
+ }
+
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0));
+ if (dev) {
+ bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804b_4++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c);
+
+ bus_ck804b_4 = bus_ck804b_3+1;
+ }
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0));
+ if (dev) {
+ bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_ck804b_5++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d);
+
+ bus_ck804b_5 = bus_ck804b_4+1;
+ }
+#endif
+
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0));
+ if (dev) {
+ bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ else {
+ printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e);
+#if 1
+ bus_ck804b_5 = bus_ck804b_4+1;
+#endif
+
+ bus_isa = bus_ck804b_5+1;
+ }
+ }
+
+
+/*I/O APICs: APIC ID Version State Address*/
+#if CONFIG_LOGICAL_CPUS==1
+ apicid_base = get_apicid_base(4);
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+ apicid_ck804 = apicid_base+0;
+ apicid_8131_1 = apicid_base+1;
+ apicid_8131_2 = apicid_base+2;
+ apicid_ck804b = apicid_base+3;
+
+}
diff --git a/src/mainboard/sunw/ultra40/irq_tables.c b/src/mainboard/sunw/ultra40/irq_tables.c
new file mode 100644
index 0000000000..5ed428ff9f
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/irq_tables.c
@@ -0,0 +1,178 @@
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+ uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
+ uint8_t slot, uint8_t rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+extern unsigned char bus_ck804_0; //1
+extern unsigned char bus_ck804_1; //2
+extern unsigned char bus_ck804_2; //3
+extern unsigned char bus_ck804_3; //4
+extern unsigned char bus_ck804_4; //5
+extern unsigned char bus_ck804_5; //6
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
+extern unsigned char bus_ck804b_0;//a
+extern unsigned char bus_ck804b_1;//b
+extern unsigned char bus_ck804b_2;//c
+extern unsigned char bus_ck804b_3;//d
+extern unsigned char bus_ck804b_4;//e
+extern unsigned char bus_ck804b_5;//f
+
+extern unsigned pci1234[];
+
+extern unsigned sbdn;
+extern unsigned hcdn[];
+extern unsigned sbdn3;
+extern unsigned sbdnb;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ unsigned slot_num;
+ uint8_t *v;
+
+ uint8_t sum=0;
+ int i;
+
+ get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk_info("Writing IRQ routing tables to 0x%x...", addr);
+
+ pirq = (void *)(addr);
+ v = (uint8_t *)(addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_ck804_0;
+ pirq->rtr_devfn = ((sbdn+9)<<3)|0;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x10de;
+ pirq->rtr_device = 0x005c;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *) ( &pirq->checksum + 1);
+ slot_num = 0;
+//pci bridge
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+//pcix bridge
+ write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
+ pirq_info++; slot_num++;
+
+ if(pci1234[2] & 0xf) {
+ //second pci beidge
+ write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0);
+ pirq_info++; slot_num++;
+ }
+#if 0
+//smbus
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+
+//usb
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+
+//audio
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+//sata
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+//sata
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+//nic
+ write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+
+//Slot1 PCIE x16
+ write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0);
+ pirq_info++; slot_num++;
+
+//firewire
+ write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+
+//Slot2 pci
+ write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0);
+ pirq_info++; slot_num++;
+//nic
+ write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+//Slot3 PCIE x16
+ write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0);
+ pirq_info++; slot_num++;
+
+//Slot4 PCIX
+ write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0);
+ pirq_info++; slot_num++;
+
+//Slot5 PCIX
+ write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0);
+ pirq_info++; slot_num++;
+
+//onboard scsi
+ write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0);
+ pirq_info++; slot_num++;
+
+//Slot6 PCIX
+ write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0);
+ pirq_info++; slot_num++;
+#endif
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk_info("done.\n");
+
+ return (unsigned long) pirq_info;
+
+}
diff --git a/src/mainboard/sunw/ultra40/mainboard.c b/src/mainboard/sunw/ultra40/mainboard.c
new file mode 100644
index 0000000000..80f14e3fc4
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/mainboard.c
@@ -0,0 +1,12 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_sunw_ultra40_ops = {
+ CHIP_NAME("Sun ultra40 mainboard")
+};
+#endif
diff --git a/src/mainboard/sunw/ultra40/mptable.c b/src/mainboard/sunw/ultra40/mptable.c
new file mode 100644
index 0000000000..a41cbcd12f
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/mptable.c
@@ -0,0 +1,236 @@
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+
+extern unsigned char bus_isa;
+extern unsigned char bus_ck804_0; //1
+extern unsigned char bus_ck804_1; //2
+extern unsigned char bus_ck804_2; //3
+extern unsigned char bus_ck804_3; //4
+extern unsigned char bus_ck804_4; //5
+extern unsigned char bus_ck804_5; //6
+extern unsigned char bus_8131_0; //7
+extern unsigned char bus_8131_1; //8
+extern unsigned char bus_8131_2; //9
+extern unsigned char bus_ck804b_0;//a
+extern unsigned char bus_ck804b_1;//b
+extern unsigned char bus_ck804b_2;//c
+extern unsigned char bus_ck804b_3;//d
+extern unsigned char bus_ck804b_4;//e
+extern unsigned char bus_ck804b_5;//f
+extern unsigned apicid_ck804;
+extern unsigned apicid_8131_1;
+extern unsigned apicid_8131_2;
+extern unsigned apicid_ck804b;
+
+extern unsigned pci1234[];
+
+extern unsigned sbdn;
+extern unsigned hcdn[];
+extern unsigned sbdn3;
+extern unsigned sbdnb;
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "TYAN ";
+ static const char productid[12] = "S2895 ";
+ struct mp_config_table *mc;
+
+ unsigned char bus_num;
+ int i;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+/*Bus: Bus ID Type*/
+ /* define bus and isa numbers */
+ for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+ smp_write_bus(mc, bus_num, "PCI ");
+ }
+ smp_write_bus(mc, bus_isa, "ISA ");
+
+/*I/O APICs: APIC ID Version State Address*/
+ {
+ device_t dev;
+ struct resource *res;
+ uint32_t dword;
+
+ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ smp_write_ioapic(mc, apicid_ck804, 0x11, res->base);
+ }
+
+
+ dword = 0x0000d218;
+ pci_write_config32(dev, 0x7c, dword);
+
+ dword = 0x12008a00;
+ pci_write_config32(dev, 0x80, dword);
+
+ dword = 0x00080d7d;
+ pci_write_config32(dev, 0x84, dword);
+
+ }
+
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
+ }
+ }
+ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (res) {
+ smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
+ }
+ }
+
+ if(pci1234[2] & 0xf) {
+ dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0));
+ if (dev) {
+ res = find_resource(dev, PCI_BASE_ADDRESS_1);
+ if (res) {
+ smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base);
+ }
+
+ dword = 0x0000d218;
+ pci_write_config32(dev, 0x7c, dword);
+
+ dword = 0x00000000;
+ pci_write_config32(dev, 0x80, dword);
+
+ dword = 0x00000d00;
+ pci_write_config32(dev, 0x84, dword);
+
+ }
+ }
+
+ }
+
+/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
+*/ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1);
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_ck804, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_ck804, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_ck804, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_ck804, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_ck804, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_ck804, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_ck804, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_ck804, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf);
+
+// Onboard ck804 smbus
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa);
+// 10
+
+// Onboard ck804 USB 1.1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21
+
+// Onboard ck804 USB 2
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20
+
+// Onboard ck804 Audio
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20
+
+// Onboard ck804 SATA 0
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23
+
+// Onboard ck804 SATA 1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22
+
+// Onboard ck804 NIC
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21
+
+//Slot 1 PCIE x16
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4);
+ }
+
+//Onboard Firewire
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19
+
+//Slot 2 PCI 32
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4);
+ }
+
+ if(pci1234[2] & 0xf) {
+//Onboard ck804b NIC
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53
+
+//Slot 3 PCIE x16
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4);
+ }
+ }
+
+//Channel B of 8131
+
+//Slot 4 PCI-X 100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4);
+ }
+
+//Slot 5 PCIX 100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29
+ }
+
+//OnBoard LSI SCSI
+ for(i=0;i<2;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30
+ }
+
+//Channel A of 8131
+
+//Slot 6 PCIX 133/100/66
+ for(i=0;i<4;i++) {
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24
+ }
+
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n",
+ mc, smp_next_mpe_entry(mc));
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/sunw/ultra40/resourcemap.c b/src/mainboard/sunw/ultra40/resourcemap.c
new file mode 100644
index 0000000000..ea572a5d29
--- /dev/null
+++ b/src/mainboard/sunw/ultra40/resourcemap.c
@@ -0,0 +1,267 @@
+/*
+ * needs a different resource map
+ *
+ */
+
+static void setup_s2895_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+
+ };
+
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
+