summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8dme/Options.lb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/supermicro/h8dme/Options.lb')
-rw-r--r--src/mainboard/supermicro/h8dme/Options.lb260
1 files changed, 130 insertions, 130 deletions
diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb
index 643cab37cb..d10e4b3304 100644
--- a/src/mainboard/supermicro/h8dme/Options.lb
+++ b/src/mainboard/supermicro/h8dme/Options.lb
@@ -19,91 +19,91 @@
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_ACPI_RESUME
-uses ACPI_SSDTX_NUM
-uses USE_FALLBACK_IMAGE
-uses USE_FAILOVER_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_FAILOVER_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_ACPI_SSDTX_NUM
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_USE_FAILOVER_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_FAILOVER_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses FAILOVER_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_FAILOVER_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses HAVE_LOW_TABLES
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_HAVE_LOW_TABLES
uses CONFIG_MULTIBOOT
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
-uses HW_MEM_HOLE_SIZE_AUTO_INC
-uses K8_HT_FREQ_1G_SUPPORT
-
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
-uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
-uses SERIAL_CPU_INIT
+uses CONFIG_SERIAL_CPU_INIT
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
+uses CONFIG_ENABLE_APIC_EXT_ID
+uses CONFIG_APIC_ID_OFFSET
+uses CONFIG_LIFT_BSP_APIC_ID
uses CONFIG_PCI_64BIT_PREF_MEM
@@ -111,9 +111,9 @@ uses CONFIG_LB_MEM_TOPK
uses CONFIG_AP_CODE_IN_CAR
-uses MEM_TRAIN_SEQ
+uses CONFIG_MEM_TRAIN_SEQ
-uses WAIT_BEFORE_CPUS_INIT
+uses CONFIG_WAIT_BEFORE_CPUS_INIT
uses CONFIG_USE_PRINTK_IN_CAR
@@ -122,24 +122,24 @@ uses CONFIG_USE_PRINTK_IN_CAR
###
##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
-#default ROM_SIZE=524288
-default ROM_SIZE=0x100000
+#default CONFIG_ROM_SIZE=524288
+default CONFIG_ROM_SIZE=0x100000
-default HAVE_LOW_TABLES = 0
+default CONFIG_HAVE_LOW_TABLES = 0
default CONFIG_MULTIBOOT=0
##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
-#default FALLBACK_SIZE=131072
-#default FALLBACK_SIZE=0x40000
+#default CONFIG_FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=0x40000
#FALLBACK: 256K-4K
-default FALLBACK_SIZE=0x3f000
+default CONFIG_FALLBACK_SIZE=0x3f000
#FAILOVER: 4K
-default FAILOVER_SIZE=0x01000
+default CONFIG_FAILOVER_SIZE=0x01000
#more 1M for pgtbl
default CONFIG_LB_MEM_TOPK=2048
@@ -147,40 +147,40 @@ default CONFIG_LB_MEM_TOPK=2048
##
## Build code for the fallback boot
##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FAILOVER_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
## ACPI tables will be included
-default HAVE_ACPI_TABLES=0
+default CONFIG_HAVE_ACPI_TABLES=0
##
## Build code to export a CMOS option table
##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
##
## Move the default coreboot cmos range off of AMD RTC registers
##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
@@ -191,41 +191,41 @@ default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
-default SERIAL_CPU_INIT=0
+default CONFIG_SERIAL_CPU_INIT=0
-default ENABLE_APIC_EXT_ID=0
-default APIC_ID_OFFSET=0x10
-default LIFT_BSP_APIC_ID=1
+default CONFIG_ENABLE_APIC_EXT_ID=0
+default CONFIG_APIC_ID_OFFSET=0x10
+default CONFIG_LIFT_BSP_APIC_ID=1
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
-#default HW_MEM_HOLE_SIZEK=0x200000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
#1G
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#512M
-#default HW_MEM_HOLE_SIZEK=0x80000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default HT_CHAIN_UNITID_BASE=0
+default CONFIG_HT_CHAIN_UNITID_BASE=0
#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default HT_CHAIN_END_UNITID_BASE=0x6
+#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
#make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
#only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#allow capable device use that above 4G
#default CONFIG_PCI_64BIT_PREF_MEM=1
@@ -233,15 +233,15 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
##
## enable CACHE_AS_RAM specifics
##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xc8000
-default DCACHE_RAM_SIZE=0x08000
-default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xc8000
+default CONFIG_DCACHE_RAM_SIZE=0x08000
+default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
default CONFIG_AP_CODE_IN_CAR=1
-default MEM_TRAIN_SEQ=1
-default WAIT_BEFORE_CPUS_INIT=1
+default CONFIG_MEM_TRAIN_SEQ=1
+default CONFIG_WAIT_BEFORE_CPUS_INIT=1
##
## Build code to setup a generic IOAPIC
@@ -251,37 +251,37 @@ default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
-default MAINBOARD_PART_NUMBER="h8dme"
-default MAINBOARD_VENDOR="Supermicro"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
+default CONFIG_MAINBOARD_PART_NUMBER="h8dme"
+default CONFIG_MAINBOARD_VENDOR="Supermicro"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511
###
### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
##
## Use a small 32K heap
##
-default HEAP_SIZE=0x8000
+default CONFIG_HEAP_SIZE=0x8000
##
## Only use the option table in a normal image
##
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
##
## Coreboot C code runs at this location in RAM
##
-default _RAMBASE=0x00100000
+default CONFIG_RAMBASE=0x00100000
##
## Load the payload from the ROM
@@ -297,8 +297,8 @@ default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
##
## Disable the gdb stub by default
@@ -314,21 +314,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
@@ -340,17 +340,17 @@ default TTYS0_LCS=0x3
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
-## DEBUG 8 debug-level messages
+## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=9
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=9
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
##
## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
#