diff options
Diffstat (limited to 'src/mainboard/technexion/tim5690/mainboard.c')
| -rw-r--r-- | src/mainboard/technexion/tim5690/mainboard.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c index 8ca3f4c8f5..25e9e07e29 100644 --- a/src/mainboard/technexion/tim5690/mainboard.c +++ b/src/mainboard/technexion/tim5690/mainboard.c @@ -146,7 +146,7 @@ static void set_thermal_config(void) byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -245,7 +245,7 @@ void tim5690_enable(device_t dev) u16 gpio_base = IT8712F_SIMPLE_IO_BASE; u8 port2; - printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard tim5690 Enable. dev=0x%p\n", dev); mb_gpio_init(&gpio_base); @@ -261,12 +261,12 @@ void tim5690_enable(device_t dev) /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -288,7 +288,7 @@ void tim5690_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -306,7 +306,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); |