diff options
Diffstat (limited to 'src/mainboard/technexion/tim8690/mainboard.c')
| -rw-r--r-- | src/mainboard/technexion/tim8690/mainboard.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c index c607167bcb..977196beb5 100644 --- a/src/mainboard/technexion/tim8690/mainboard.c +++ b/src/mainboard/technexion/tim8690/mainboard.c @@ -60,7 +60,7 @@ static void enable_onboard_nic() u8 byte; device_t sm_dev; - printk_info("enable_onboard_nic.\n"); + printk(BIOS_INFO, "enable_onboard_nic.\n"); sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); @@ -97,7 +97,7 @@ static void set_thermal_config() byte = ADT7461_read_byte(0x02); /* read status register to clear it */ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ - printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); /* sb600 settings for thermal config */ /* set SB600 GPIO 64 to GPIO with pull-up */ @@ -150,19 +150,19 @@ void tim8690_enable(device_t dev) struct mainboard_config *mainboard = (struct mainboard_config *)dev->chip_info; - printk_info("Mainboard tim8690 Enable. dev=0x%p\n", dev); + printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev); #if (CONFIG_GFXUMA == 1) msr_t msr, msr2; /* TOP_MEM: the top of DRAM below 4G */ msr = rdmsr(TOP_MEM); - printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", __func__, msr.lo, msr.hi); /* TOP_MEM2: the top of DRAM above 4G */ msr2 = rdmsr(TOP_MEM2); - printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", __func__, msr2.lo, msr2.hi); switch (msr.lo) { @@ -184,7 +184,7 @@ void tim8690_enable(device_t dev) } uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ - printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); /* TODO: TOP_MEM2 */ @@ -203,7 +203,7 @@ int add_mainboard_resources(struct lb_memory *mem) * in some circumstances we want the memory mentioned as reserved. */ #if (CONFIG_GFXUMA == 1) - printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", uma_memory_base, uma_memory_size); lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); |