diff options
Diffstat (limited to 'src/mainboard/tyan/s1846/auto.c')
-rw-r--r-- | src/mainboard/tyan/s1846/auto.c | 52 |
1 files changed, 6 insertions, 46 deletions
diff --git a/src/mainboard/tyan/s1846/auto.c b/src/mainboard/tyan/s1846/auto.c index 7bb2a41788..fdb8f7550b 100644 --- a/src/mainboard/tyan/s1846/auto.c +++ b/src/mainboard/tyan/s1846/auto.c @@ -31,12 +31,12 @@ #include "ram/ramtest.c" #include "southbridge/intel/i82371eb/i82371eb_early_smbus.c" #include "northbridge/intel/i440bx/raminit.h" -#include "mainboard/bitworks/ims/debug.c" // FIXME +#include "mainboard/asus/mew-vm/debug.c" /* FIXME */ #include "pc80/udelay_io.c" #include "lib/delay.c" -#include "superio/nsc/pc87309/pc87309_early_serial.c" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" +#include "superio/nsc/pc87309/pc87309_early_serial.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87309_SP1) @@ -49,64 +49,24 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) #include "northbridge/intel/i440bx/debug.c" #include "sdram/generic_sdram.c" -static void enable_mainboard_devices(void) -{ - device_t dev = pci_locate_device(PCI_ID(0x8086, 0x7110), 0); - - if (dev == PCI_DEV_INVALID) { - die("Southbridge not found!\n"); - } else { - print_debug("Southbridge found!\n"); - } -} - static void main(unsigned long bist) { static const struct mem_controller memctrl[] = { { .d0 = PCI_DEV(0, 0, 0), .channel0 = {0x50, 0x51, 0x52, 0x53}, - }, + } }; - /* Skip this if there was a built in self test failure. */ - if (bist == 0) { + if (bist == 0) early_mtrr_init(); - } pc87309_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); - - /* Halt if there was a built in self test failure. */ report_bist_failure(bist); - - enable_mainboard_devices(); - enable_smbus(); - - dump_spd_registers(&memctrl[0]); - + /* dump_spd_registers(&memctrl[0]); */ sdram_initialize(sizeof(memctrl) / sizeof(memctrl[0]), memctrl); - - /* Check whether RAM is working. - * - * Do _not_ check the area from 640 KB - 768 KB, as that's not really - * RAM, but rather reserved for the 'Video Buffer Area'. - * - * Other stuff in the range from 640 KB - 1 MB: - * - * - 640 KB - 768 KB: Video Buffer Area - * - 768 KB - 896 KB: Expansion Area - * - 896 KB - 960 KB: Extended System BIOS Area - * - 960 KB - 1 MB: Memory (BIOS Area) - System BIOS Area - * - * Trying to check these areas will usually fail, too. However, you - * probably can set the PAM registers of the northbridge to map - * those areas to RAM (read/write). In that case you can use the - * range from 768 KB - 1 MB as normal RAM, and thus check it here. - */ - ram_check(0x00000000, 0x0009ffff); /* 0 - 640 KB */ - ram_check(0x000c0000, 0x00100000); /* 768 KB - 1 MB */ - // ram_check(0x00100000, 0x007c0000); /* 1 MB - 64 MB */ + /* ram_check(0, 640 * 1024); */ } |