diff options
Diffstat (limited to 'src/mainboard/tyan/s2850')
| -rw-r--r-- | src/mainboard/tyan/s2850/Config.lb | 22 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2850/Options.lb | 174 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2850/cache_as_ram_auto.c | 6 |
3 files changed, 101 insertions, 101 deletions
diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index 84bb7084eb..59dcd8e557 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index f9317f7bd2..37814240be 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -1,64 +1,64 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -67,50 +67,50 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=12 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -122,7 +122,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=1 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -132,9 +132,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -145,37 +145,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2850" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 +default CONFIG_MAINBOARD_PART_NUMBER="S2850" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -189,8 +189,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -207,21 +207,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -233,17 +233,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2850/cache_as_ram_auto.c b/src/mainboard/tyan/s2850/cache_as_ram_auto.c index 373e0a6192..378c05a723 100644 --- a/src/mainboard/tyan/s2850/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2850/cache_as_ram_auto.c @@ -94,7 +94,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -150,7 +150,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -179,7 +179,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); |