diff options
Diffstat (limited to 'src/mainboard/tyan/s2882')
| -rw-r--r-- | src/mainboard/tyan/s2882/Config.lb | 57 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2882/Options.lb | 12 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2882/auto.c | 42 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2882/cache_as_ram_auto.c | 58 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2882/irq_tables.c | 333 | ||||
| -rw-r--r-- | src/mainboard/tyan/s2882/reset.c | 6 |
6 files changed, 151 insertions, 357 deletions
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 7739a67ca6..6f71a49864 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -44,7 +44,7 @@ driver mainboard.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o +object reset.o if USE_DCACHE_RAM @@ -278,36 +278,37 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on -# chip drivers/generic/generic #dimm 0-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 0-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 0-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 0-1-1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #dimm 1-0-0 -# device i2c 54 on end -# end -# chip drivers/generic/generic #dimm 1-0-1 -# device i2c 55 on end -# end -# chip drivers/generic/generic #dimm 1-1-0 -# device i2c 56 on end -# end -# chip drivers/generic/generic #dimm 1-1-1 -# device i2c 57 on end -# end + device pci 1.3 on end + device pci 1.3 on +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 54 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 55 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 56 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 57 on end +# end end # acpi device pci 1.5 off end device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" + register "ide0_enable" = "1" + register "ide1_enable" = "1" end end # device pci 18.0 diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 1249719210..ffa34c4f08 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -3,9 +3,6 @@ uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE uses HAVE_FALLBACK_BOOT uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS @@ -87,13 +84,6 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_HARD_RESET=1 ## -## Funky hard reset implementation -## -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## ## Build code to export a programmable irq routing table ## default HAVE_PIRQ_TABLE=1 @@ -153,7 +143,7 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2882" +default MAINBOARD_PART_NUMBER="S2882" default MAINBOARD_VENDOR="Tyan" default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index fb7a63abb5..910db9e8a5 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -27,20 +27,52 @@ #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +/* Look up a which bus a given node/link combination is on. + * return 0 when we can't find the answer. + */ +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} + static void hard_reset(void) { + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); + set_bios_reset(); - + /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + pci_write_config8(dev, 0x41, 0xf1); /* reset */ outb(0x0e, 0x0cf9); } static void soft_reset(void) { + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); + set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); + pci_write_config8(dev, 0x47, 1); } #define REV_B_RESET 0 @@ -64,7 +96,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl) } } - static inline void activate_spd_rom(const struct mem_controller *ctrl) { /* nothing to do */ @@ -160,7 +191,7 @@ static void main(unsigned long bist) || (id.coreid != 0) #endif ) { - stop_this_cpu(); + stop_this_cpu(); // it will stop all cores except core0 of cpu0 } } @@ -176,7 +207,6 @@ static void main(unsigned long bist) #if CONFIG_LOGICAL_CPUS==1 start_other_cores(); #endif - // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); if (needs_reset) { print_info("ht reset -\r\n"); diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c index 1b3d77a206..f0adb4204b 100644 --- a/src/mainboard/tyan/s2882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -36,21 +36,52 @@ #include "northbridge/amd/amdk8/setup_resource_map.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) +/* Look up a which bus a given node/link combination is on. + * return 0 when we can't find the answer. + */ +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} static void hard_reset(void) { + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); + set_bios_reset(); /* enable cf9 */ - pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + pci_write_config8(dev, 0x41, 0xf1); /* reset */ outb(0x0e, 0x0cf9); } static void soft_reset(void) { + device_t dev; + + /* Find the device */ + dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); + set_bios_reset(); - pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); + pci_write_config8(dev, 0x47, 1); } static void memreset_setup(void) @@ -93,6 +124,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 #include "cpu/amd/dualcore/dualcore.c" +#else +#include "cpu/amd/model_fxx/node_id.c" #endif #define FIRST_CPU 1 @@ -236,6 +269,7 @@ void amd64_main(unsigned long bist) #if CONFIG_LOGICAL_CPUS==1 if(id.coreid == 0) { if (cpu_init_detected(id.nodeid)) { +// __asm__ volatile ("jmp __cpu_reset"); cpu_reset = 1; goto cpu_reset_x; } @@ -249,7 +283,6 @@ void amd64_main(unsigned long bist) distinguish_cpu_resets(nodeid); #endif - if (!boot_cpu() #if CONFIG_LOGICAL_CPUS==1 || (id.coreid != 0) @@ -261,7 +294,6 @@ void amd64_main(unsigned long bist) } } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); @@ -270,14 +302,11 @@ void amd64_main(unsigned long bist) report_bist_failure(bist); setup_default_resource_map(); -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); -#endif needs_reset = setup_coherent_ht_domain(); #if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched start_other_cores(); #endif needs_reset |= ht_setup_chains_x(); @@ -288,21 +317,10 @@ void amd64_main(unsigned long bist) } enable_smbus(); -#if 0 - dump_spd_registers(&cpu[0]); -#endif -#if 0 - dump_smbus_registers(); -#endif memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 0 - dump_pci_devices(); -#endif - - #if 1 { /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ @@ -319,6 +337,7 @@ void amd64_main(unsigned long bist) } #endif +#if 1 cpu_reset_x: @@ -382,6 +401,7 @@ cpu_reset_x: copy_and_run(new_cpu_reset); /* We will not return */ } +#endif print_debug("should not be here -\r\n"); diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index cdff230a2f..add22b4e03 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -1,301 +1,48 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> #include <arch/pirq_routing.h> +#include <device/pci.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*15, /* there can be total 15 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xff, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structu -re (including checksum) */ - { - {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x4,(6<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x3,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x3,(1<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x2,(3<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x2,(2<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x4,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x4,(8<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(6<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(5<<3)|0, {{0x3, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}}, 0, 0}, - {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x3,(4<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, - {0x3,(5<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, - } -}; - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; +#define IRQ_ROUTER_BUS 1 +#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) +#define IRQ_ROUTER_VENDOR 0x1022 +#define IRQ_ROUTER_DEVICE 0x746b - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} +#define AVAILABLE_IRQS 0xdef8 +#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ + { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ + {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} +/* Each IRQ_SLOT entry consists of: + * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu + */ +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ + IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ + IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + IRQ_ROUTER_VENDOR, /* Vendor */ + IRQ_ROUTER_DEVICE, /* Device */ + 0x00, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xb0, /* u8 checksum , mod 256 checksum must give zero */ + { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ + /* PCI Slot 1-6 */ + IRQ_SLOT(1, 3,1,0, 2,3,4,1 ), + IRQ_SLOT(2, 3,2,0, 3,4,1,2 ), + IRQ_SLOT(3, 2,1,0, 2,3,4,1 ), + IRQ_SLOT(4, 2,2,0, 3,4,1,2 ), + IRQ_SLOT(5, 4,5,0, 2,3,4,1 ), + IRQ_SLOT(6, 4,4,0, 1,2,3,4 ), + /* Onboard NICs */ + IRQ_SLOT(0, 2,3,0, 4,0,0,0 ), + IRQ_SLOT(0, 2,4,0, 4,0,0,0 ), + /* Let Linux know about bus 1 */ + IRQ_SLOT(0, 1,4,3, 0,0,0,0 ), + } +}; unsigned long write_pirq_routing_table(unsigned long addr) { - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum=0; - int i; - - unsigned char bus_chain_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - { - device_t dev; - - /* HT chain 0 */ - bus_chain_0 = node_link_to_bus(0, 0); - if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_chain_0 = 1; - } - - /* 8111 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); - - bus_8111_1 = 4; - } - /* 8131-1 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_8131_2 = 3; - } - } - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_chain_0; - pirq->rtr_devfn = (4<<3)|3; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1022; - pirq->rtr_device = 0x746b; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; - - { - device_t dev; - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3)); - if (dev) { - /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D - - PINTA = IRQ5 - PINTB = IRQ9 - PINTC = IRQ11 - PINTD = IRQ10 - */ - pci_write_config16(dev, 0x56, 0xab95); - } - } - - printk_info("setting Onboard AMD Southbridge \n"); - static const unsigned char slotIrqs_1_4[4] = { 5, 9, 11, 10 }; - pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); - write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - printk_info("setting Onboard AMD USB \n"); - static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; - pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); - write_pirq_info(pirq_info, bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - printk_info("setting Onboard ATI Display Adapter\n"); - static const unsigned char slotIrqs_8111_1_6[4] = { 11, 0, 0, 0 }; - pci_assign_irqs(bus_8111_1, 6, slotIrqs_8111_1_6); - write_pirq_info(pirq_info, bus_8111_1,(6<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - - printk_info("setting Slot 1\n"); - static const unsigned char slotIrqs_8131_2_3[4] = { 5, 9, 11, 10 }; - pci_assign_irqs(bus_8131_2, 3, slotIrqs_8131_2_3); - write_pirq_info(pirq_info, bus_8131_2,(3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0); - pirq_info++; slot_num++; - - printk_info("setting Slot 2\n"); - static const unsigned char slotIrqs_8131_2_1[4] = { 9, 11, 10, 5 }; - pci_assign_irqs(bus_8131_2, 1, slotIrqs_8131_2_1); - write_pirq_info(pirq_info, bus_8131_2,(1<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0); - pirq_info++; slot_num++; - - printk_info("setting Slot 3\n"); - static const unsigned char slotIrqs_8131_1_3[4] = { 10, 5, 9, 11 }; - pci_assign_irqs(bus_8131_1, 3, slotIrqs_8131_1_3); - write_pirq_info(pirq_info, bus_8131_1,(3<<3)|0, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x3, 0); - pirq_info++; slot_num++; - - printk_info("setting Slot 4\n"); - static const unsigned char slotIrqs_8131_1_2[4] = { 11, 10, 5, 9 }; - pci_assign_irqs(bus_8131_1, 2, slotIrqs_8131_1_2); - write_pirq_info(pirq_info, bus_8131_1,(2<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x4, 0); - pirq_info++; slot_num++; - - printk_info("setting Slot 5 \n"); - static const unsigned char slotIrqs_8111_1_4[4] = { 5, 9, 11, 10 }; - pci_assign_irqs(bus_8111_1, 4, slotIrqs_8111_1_4); - write_pirq_info(pirq_info, bus_8111_1,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x5, 0); - pirq_info++; slot_num++; - - printk_info("setting Onboard SI Serail ATA\n"); - static const unsigned char slotIrqs_8111_1_5[4] = { 10, 0, 0, 0 }; - pci_assign_irqs(bus_8111_1, 5, slotIrqs_8111_1_5); - write_pirq_info(pirq_info, bus_8111_1,(5<<3)|0, 0x4, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - - printk_info("setting Onboard Intel NIC\n"); - static const unsigned char slotIrqs_8111_1_8[4] = { 11, 0, 0, 0 }; - pci_assign_irqs(bus_8111_1, 8, slotIrqs_8111_1_8); - write_pirq_info(pirq_info, bus_8111_1,(8<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - - printk_info("setting Onboard Adaptec SCSI\n"); - static const unsigned char slotIrqs_8131_1_6[4] = { 5, 9, 0, 0 }; - pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); - write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -#if 0 - //?? - write_pirq_info(pirq_info, bus_8131_1,(5<<3)|0, 0x3, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0); - pirq_info++; slot_num++; -#endif - - printk_info("setting Onboard Broadcom NIC\n"); - static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; - pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); - write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -#if 0 - //?? what's this? - write_pirq_info(pirq_info, bus_8131_2,(4<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x6, 0); - pirq_info++; slot_num++; -#endif - -#if 0 - //?? what's this? - write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); - pirq_info++; slot_num++; -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - return (unsigned long) pirq_info; - + return copy_pirq_routing_table(addr); } diff --git a/src/mainboard/tyan/s2882/reset.c b/src/mainboard/tyan/s2882/reset.c new file mode 100644 index 0000000000..3db3956ec6 --- /dev/null +++ b/src/mainboard/tyan/s2882/reset.c @@ -0,0 +1,6 @@ +#include "../../../southbridge/amd/amd8111/amd8111_reset.c" + +void hard_reset(void) +{ + amd8111_hard_reset(0, 0); +} |