diff options
Diffstat (limited to 'src/mainboard/tyan/s4880/auto.c')
-rw-r--r-- | src/mainboard/tyan/s4880/auto.c | 177 |
1 files changed, 48 insertions, 129 deletions
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index 21855aa51c..12c0c9541c 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -43,12 +43,6 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } -static void soft2_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(3, 0x04, 0), 0x47, 1); -} - static void memreset_setup(void) { if (is_cpu_pre_c0()) { @@ -69,63 +63,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl) } } -static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) -{ - /* Routing Table Node i - * - * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c - * i: 0, 1, 2, 3, 4, 5, 6, 7 - * - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - uint32_t ret=0x00010101; /* default row entry */ - -/* - (L1) (L2) - CPU3-------------CPU1 - (L0)| |(L0) - | | - | | - | | - | | - (L0)| |(L0) - CPU2-------------CPU0---------8131----------8111 - (L2) (L1) (L2) -*/ - - /* Link0 of CPU0 to Link0 of CPU1 */ - /* Link1 of CPU0 to Link2 of CPU2 */ - /* Link2 of CPU1 to Link1 of CPU3 */ - /* Link0 of CPU2 to Link0 of CPU3 */ - - static const unsigned int rows_4p[4][4] = { - { 0x00070101, 0x00010202, 0x00030404, 0x00010204 }, - { 0x00010202, 0x000b0101, 0x00010208, 0x00030808 }, - { 0x00030808, 0x00010208, 0x000b0101, 0x00010202 }, - { 0x00010204, 0x00030404, 0x00010202, 0x00070101 } - }; - - if (!(node>=maxnodes || row>=maxnodes)) { - ret=rows_4p[node][row]; - } - - return ret; -} - static inline void activate_spd_rom(const struct mem_controller *ctrl) { #define SMBUS_HUB 0x18 @@ -133,21 +70,13 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl) smbus_write_byte(SMBUS_HUB , 0x01, device); smbus_write_byte(SMBUS_HUB , 0x03, 0); } -#if 0 -static inline void change_i2c_mux(unsigned device) -{ -#define SMBUS_HUB 0x18 - smbus_write_byte(SMBUS_HUB , 0x01, device); - smbus_write_byte(SMBUS_HUB , 0x03, 0); -} -#endif static inline int spd_read_byte(unsigned device, unsigned address) { return smbus_read_byte(device, address); } -//#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" @@ -156,6 +85,11 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#include "cpu/amd/dualcore/dualcore.c" +#endif + #define FIRST_CPU 1 #define SECOND_CPU 1 @@ -228,89 +162,74 @@ static void main(unsigned long bist) }; int i; int needs_reset; - unsigned nodeid; +#if CONFIG_LOGICAL_CPUS==1 + struct node_core_id id; +#else + unsigned nodeid; +#endif if (bist == 0) { /* Skip this if there was a built in self test failure */ amd_early_mtrr_init(); + +#if CONFIG_LOGICAL_CPUS==1 + set_apicid_cpuid_lo(); +#endif + enable_lapic(); init_timer(); - nodeid = lapicid() & 0xf; - +#if CONFIG_LOGICAL_CPUS==1 + id = get_node_core_id_x(); + if(id.coreid == 0) { + if (cpu_init_detected(id.nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(id.nodeid); + } +#else + nodeid = lapicid(); if (cpu_init_detected(nodeid)) { asm volatile ("jmp __cpu_reset"); } distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } - } - +#endif + + if (!boot_cpu() +#if CONFIG_LOGICAL_CPUS==1 + || (id.coreid != 0) +#endif + ) { + stop_this_cpu(); + } + } + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); /* Halt if there was a built in self test failure */ - report_bist_failure(bist); + report_bist_failure(bist); setup_s4880_resource_map(); + needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); + +#if CONFIG_LOGICAL_CPUS==1 + start_other_cores(); +#endif + + // automatically set that for you, but you might meet tight space + needs_reset |= ht_setup_chains_x(); + if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } -#if 0 - dump_pci_devices(); -#endif enable_smbus(); -#if 0 - -// activate_spd_rom(&cpu[0]); -// dump_spd_registers(&cpu[0]); - -// for(i=0;i<4;i++) { -// activate_spd_rom(&cpu[i]); -// dump_smbus_registers(); -// } - for(i=1;i<256;i=i*2) { - change_i2c_mux(i); - dump_smbus_registers(); - } - -#endif + memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 0 - dump_pci_devices(); -#endif -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 1)); -#endif - - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif -/* -#if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); -#else -#if TOTAL_CPUS < 2 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x01000000); -#else - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x81000000); -#endif -#endif -*/ } |