summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/tyan')
-rw-r--r--src/mainboard/tyan/s2735/romstage.c46
-rw-r--r--src/mainboard/tyan/s2850/romstage.c71
-rw-r--r--src/mainboard/tyan/s2875/romstage.c67
-rw-r--r--src/mainboard/tyan/s2880/romstage.c66
-rw-r--r--src/mainboard/tyan/s2881/romstage.c71
-rw-r--r--src/mainboard/tyan/s2882/romstage.c66
-rw-r--r--src/mainboard/tyan/s2885/romstage.c71
-rw-r--r--src/mainboard/tyan/s2891/romstage.c74
-rw-r--r--src/mainboard/tyan/s2892/romstage.c72
-rw-r--r--src/mainboard/tyan/s4880/romstage.c66
-rw-r--r--src/mainboard/tyan/s4882/romstage.c65
11 files changed, 99 insertions, 636 deletions
diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c
index 5e2678a047..6bcb459236 100644
--- a/src/mainboard/tyan/s2735/romstage.c
+++ b/src/mainboard/tyan/s2735/romstage.c
@@ -80,54 +80,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/x86/car/copy_and_run.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "southbridge/intel/i82801ex/cmos_failover.c"
-
-void real_main(unsigned long bist);
-
void amd64_main(unsigned long bist)
{
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
- check_cmos_failed();
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- );
- cpu_reset:
-// post_code(0x24);
-#if 0
- //CPU reset will reset memtroller ???
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- );
-#endif
-
- fallback_image:
-// post_code(0x25);
- real_main(bist);
-}
-void real_main(unsigned long bist)
-#else
-void amd64_main(unsigned long bist)
-#endif
-{
static const struct mem_controller memctrl[] = {
{
.d0 = PCI_DEV(0, 0, 0),
diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c
index 352feadf70..d6b13b0b55 100644
--- a/src/mainboard/tyan/s2850/romstage.c
+++ b/src/mainboard/tyan/s2850/romstage.c
@@ -93,72 +93,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -173,6 +112,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c
index 50b12f1ff6..12f41e0ff4 100644
--- a/src/mainboard/tyan/s2875/romstage.c
+++ b/src/mainboard/tyan/s2875/romstage.c
@@ -84,69 +84,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx)/* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -172,6 +114,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c
index c97f3b7708..553910ae73 100644
--- a/src/mainboard/tyan/s2880/romstage.c
+++ b/src/mainboard/tyan/s2880/romstage.c
@@ -85,68 +85,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -172,6 +115,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c
index 9d5edcb462..536f887112 100644
--- a/src/mainboard/tyan/s2881/romstage.c
+++ b/src/mainboard/tyan/s2881/romstage.c
@@ -98,72 +98,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index cdea6933ed..2fe7561deb 100644
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -88,68 +88,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -175,6 +118,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c
index d561e033c6..5b178f7e9f 100644
--- a/src/mainboard/tyan/s2885/romstage.c
+++ b/src/mainboard/tyan/s2885/romstage.c
@@ -98,72 +98,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- /* Setup the amd8111 */
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Setup the amd8111 */
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c
index 9ace5e30ae..0505493dc1 100644
--- a/src/mainboard/tyan/s2891/romstage.c
+++ b/src/mainboard/tyan/s2891/romstage.c
@@ -77,8 +77,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -112,68 +110,8 @@ static void sio_setup(void)
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -189,6 +127,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c
index e94017e532..1a4766cbea 100644
--- a/src/mainboard/tyan/s2892/romstage.c
+++ b/src/mainboard/tyan/s2892/romstage.c
@@ -82,8 +82,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -101,66 +99,8 @@ static void sio_setup(void)
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- sio_setup();
-
- /* Setup the ck804 */
- ck804_enable_rom();
-
- /* Is this a deliberate reset by the bios */
-// post_code(0x22);
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
-// post_code(0x23);
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
-// post_code(0x25);
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- #if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
- #endif
- real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -176,6 +116,18 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ sio_setup();
+
+ /* Setup the ck804 */
+ ck804_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c
index 9f38ec1992..590de9f922 100644
--- a/src/mainboard/tyan/s4880/romstage.c
+++ b/src/mainboard/tyan/s4880/romstage.c
@@ -111,68 +111,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const struct mem_controller cpu[] = {
{
.node_id = 0,
@@ -222,6 +165,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
int needs_reset;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
init_cpus(cpu_init_detectedx);
}
diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c
index 1c8d3b42fe..d1233b4d31 100644
--- a/src/mainboard/tyan/s4882/romstage.c
+++ b/src/mainboard/tyan/s4882/romstage.c
@@ -119,67 +119,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- unsigned last_boot_normal_x = last_boot_normal();
-
- /* Is this a cpu only reset? or Is this a secondary cpu? */
- if ((cpu_init_detectedx) || (!boot_cpu())) {
- if (last_boot_normal_x) {
- goto normal_image;
- } else {
- goto fallback_image;
- }
- }
-
- /* Nothing special needs to be done to find bus 0 */
- /* Allow the HT devices to be found */
-
- enumerate_ht_chain();
-
- amd8111_enable_rom();
-
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal_x) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- __asm__ volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist), "b" ( cpu_init_detectedx ) /* inputs */
- );
-
- fallback_image:
- ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
- failover_process(bist, cpu_init_detectedx);
-#endif
- real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
static const uint16_t spd_addr [] = {
RC0|DIMM0, RC0|DIMM2, 0, 0,
RC0|DIMM1, RC0|DIMM3, 0, 0,
@@ -201,6 +145,15 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
struct mem_controller ctrl[8];
unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ amd8111_enable_rom();
+ }
+
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}