diff options
Diffstat (limited to 'src/mainboard/via/epia-m700')
| -rw-r--r-- | src/mainboard/via/epia-m700/romstage.c | 20 |
1 files changed, 8 insertions, 12 deletions
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c index a10f75573d..174f4306ca 100644 --- a/src/mainboard/via/epia-m700/romstage.c +++ b/src/mainboard/via/epia-m700/romstage.c @@ -57,7 +57,7 @@ static int acpi_is_wakeup_early_via_vx800(void) device_t dev; u16 tmp, result; - print_debug("In acpi_is_wakeup_early_via_vx800\n"); + printk(BIOS_DEBUG, "In acpi_is_wakeup_early_via_vx800\n"); /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_LPC), 0); @@ -73,9 +73,7 @@ static int acpi_is_wakeup_early_via_vx800(void) tmp = inw(VX800_ACPI_IO_BASE + 0x04); result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; - print_debug(" boot_mode="); - print_debug_hex16(result); - print_debug("\n"); + printk(BIOS_DEBUG, " boot_mode=%04x\n", result); return result; } @@ -116,7 +114,7 @@ static void enable_mainboard_devices(void) pci_write_config8(dev, 0x5b, 0x01); #endif - print_debug("In enable_mainboard_devices\n"); + printk(BIOS_DEBUG, "In enable_mainboard_devices\n"); /* Enable P2P Bridge Header for external PCI bus. */ dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0); @@ -451,7 +449,7 @@ void main(unsigned long bist) /* Halt if there was a built-in self test failure. */ report_bist_failure(bist); - print_debug("Enabling mainboard devices\n"); + printk(BIOS_DEBUG, "Enabling mainboard devices\n"); enable_mainboard_devices(); /* @@ -460,9 +458,7 @@ void main(unsigned long bist) */ device = PCI_DEV(0, 0, 4); Data = pci_read_config8(device, 0xf6); - print_debug("NB chip revision ="); - print_debug_hex8(Data); - print_debug("\n"); + printk(BIOS_DEBUG, "NB chip revision = %02x\n", Data); /* Make NB ready before DRAM init. */ via_pci_inittable(Data, mNbStage1InitTbl); @@ -479,7 +475,7 @@ void main(unsigned long bist) u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; DRAM_SYS_ATTR DramAttr; - print_debug("This is an S3 wakeup\n"); + printk(BIOS_DEBUG, "This is an S3 wakeup\n"); memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); /* @@ -514,7 +510,7 @@ void main(unsigned long bist) /* Just copy this function from draminit to here! */ SetUMARam(); - print_debug("Resume from S3, RAM init was ignored\n"); + printk(BIOS_DEBUG, "Resume from S3, RAM init was ignored\n"); } else { ddr2_ram_setup(); ram_check(0, 640 * 1024); @@ -634,7 +630,7 @@ void main(unsigned long bist) ); #endif /* This can have function call, because no variable used before this. */ - print_debug("Copy memory to high memory to protect s3 wakeup vector code\n"); + printk(BIOS_DEBUG, "Copy memory to high memory to protect s3 wakeup vector code\n"); memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - 0x100000), (unsigned char *)0, 0xa0000); memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - |