summaryrefslogtreecommitdiff
path: root/src/mainboard/via
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/via')
-rw-r--r--src/mainboard/via/epia-m/Config.lb14
-rw-r--r--src/mainboard/via/epia-m/auto.c13
-rw-r--r--src/mainboard/via/epia-m/fadt.c155
-rw-r--r--src/mainboard/via/epia-m/irq_tables.c40
-rw-r--r--src/mainboard/via/epia-m/mainboard.c54
5 files changed, 252 insertions, 24 deletions
diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb
index ed43611162..8438fcf23b 100644
--- a/src/mainboard/via/epia-m/Config.lb
+++ b/src/mainboard/via/epia-m/Config.lb
@@ -23,6 +23,7 @@ uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
+uses HAVE_ACPI_TABLES
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
@@ -130,6 +131,11 @@ arch i386 end
driver mainboard.o
#object reset.o
+if HAVE_ACPI_TABLES
+ object fadt.o
+ object dsdt.o
+end
+
##
## Romcc output
##
@@ -218,6 +224,14 @@ northbridge via/vt8623 "vt8623"
register "enable_keyboard" = "0"
register "enable_nvram" = "1"
end
+ southbridge ricoh/rl5c476 "rl5c476"
+ end
+ superio via/vt1211 "vt1211"
+ register "enable_com_ports" = "1"
+ register "enable_hwmon" = "1"
+ register "enable_lpt" = "1"
+ register "enable_fdc" = "1"
+ end
end
cpu p6 "cpu0"
diff --git a/src/mainboard/via/epia-m/auto.c b/src/mainboard/via/epia-m/auto.c
index 88523ed9e9..6fbc8306a4 100644
--- a/src/mainboard/via/epia-m/auto.c
+++ b/src/mainboard/via/epia-m/auto.c
@@ -49,7 +49,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
-#include "northbridge/via/vt8601/raminit.c"
+#include "northbridge/via/vt8623/raminit.c"
/*
#include "sdram/generic_sdram.c"
*/
@@ -64,8 +64,9 @@ static void enable_mainboard_devices(void)
if (dev == PCI_DEV_INVALID) {
die("Southbridge not found!!!\n");
}
- pci_write_config8(dev, 0x50, 7);
- pci_write_config8(dev, 0x51, 0xff);
+ pci_write_config8(dev, 0x50, 0);
+ pci_write_config8(dev, 0x51, 0xfd);
+ pci_write_config8(dev, 0x94, 0xb2);
#if 0
// This early setup switches IDE into compatibility mode before PCI gets
// // a chance to assign I/Os
@@ -97,9 +98,15 @@ static void enable_shadow_ram(void)
static void main(void)
{
unsigned long x;
+ device_t dev;
/* init_timer();*/
outb(5, 0x80);
+
+ pci_write_config8( 0xd*8,0x15,0x1c);
+ pci_write_config8( 0 , 0xe1, 0xdd);
+
+ outb(5, 0x80);
enable_smbus();
enable_vt8235_serial();
diff --git a/src/mainboard/via/epia-m/fadt.c b/src/mainboard/via/epia-m/fadt.c
new file mode 100644
index 0000000000..702d556988
--- /dev/null
+++ b/src/mainboard/via/epia-m/fadt.c
@@ -0,0 +1,155 @@
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ * (C) Copyright 2004 Nick Barker <nick.barker9@btinternet.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <string.h>
+#include <arch/acpi.h>
+
+void acpi_create_fadt(acpi_fadt_t *fadt,acpi_facs_t *facs,void *dsdt){
+ acpi_header_t *header=&(fadt->header);
+
+ memset((void *)fadt,0,sizeof(acpi_fadt_t));
+ memcpy(header->signature,"FACP",4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id,"LXBIOS",6);
+ memcpy(header->oem_table_id,"LXBACPI ",8);
+ memcpy(header->asl_compiler_id,"LXB",8);
+ header->asl_compiler_revision=0;
+
+ fadt->firmware_ctrl=facs;
+ fadt->dsdt= dsdt;
+ fadt->preferred_pm_profile=0;
+ fadt->sci_int=5;
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0;
+ fadt->acpi_disable = 0;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0x0;
+
+ fadt->pm1a_evt_blk = 0x400;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = 0x404;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = 0x0;
+ fadt->pm_tmr_blk = 0x408;
+ fadt->gpe0_blk = 0x420;
+ fadt->gpe1_blk = 0x0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 4;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0;
+ fadt->p_lvl2_lat = 90;
+ fadt->p_lvl3_lat = 900;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 0;
+ fadt->duty_width = 1;
+ fadt->day_alrm = 125;
+ fadt->mon_alrm = 126;
+ fadt->century = 50;
+ fadt->iapc_boot_arch = 0x1;
+ fadt->flags = 0x4a5;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 4;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = 0x400;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 2;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = 0x404;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = 0x0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 4;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = 0x408;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 0;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = 0x420;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+
+}
diff --git a/src/mainboard/via/epia-m/irq_tables.c b/src/mainboard/via/epia-m/irq_tables.c
index 894c27dec5..8e8aadcbf4 100644
--- a/src/mainboard/via/epia-m/irq_tables.c
+++ b/src/mainboard/via/epia-m/irq_tables.c
@@ -1,32 +1,30 @@
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
-
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+ * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
+ *
+ * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*5, /* there can be total 5 devices on the bus */
- 0, /* Where the interrupt router lies (bus) */
- 0x88, /* Where the interrupt router lies (dev) */
- 0x1c20, /* IRQs devoted exclusively to PCI usage */
- 0x1106, /* Vendor */
- 0x8231, /* Device */
- 0, /* Crap (miniport) */
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*5, /* there can be total 5 devices on the bus */
+ 0x00, /* Where the interrupt router lies (bus) */
+ (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
+ 0xc20, /* IRQs devoted exclusively to PCI usage */
+ 0, /* Vendor */
+ 0, /* Device */
+ 0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+ 0x68, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
{
- /* 8231 ethernet */
- {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0},
- /* 8231 internal */
- {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0},
- /* PCI slot */
- {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0},
- {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0},
- {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0},
+ /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
+ {0x00,(0x14<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
+ {0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x2, 0x0},
+ {0x00,(0x0a<<3)|0x0, {{0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0x0deb8}}, 0x3, 0x0},
+ {0x00,(0x0d<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x4, 0x0},
+ {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0x0deb8}}, 0x0, 0x0},
}
};
diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c
index 747eb3eb7f..9597392593 100644
--- a/src/mainboard/via/epia-m/mainboard.c
+++ b/src/mainboard/via/epia-m/mainboard.c
@@ -9,6 +9,9 @@
#include <device/chip.h>
#include "chip.h"
+void vga_enable_console();
+
+
static int
mainboard_scan_bus(device_t root, int maxbus)
{
@@ -19,6 +22,56 @@ mainboard_scan_bus(device_t root, int maxbus)
return maxbus;
}
+void vga_fixup(void) {
+ // we do this right here because:
+ // - all the hardware is working, and some VGA bioses seem to need
+ // that
+ // - we need page 0 below for linuxbios tables.
+
+ printk_debug("INSTALL REAL-MODE IDT\n");
+ setup_realmode_idt();
+ printk_debug("DO THE VGA BIOS\n");
+ do_vgabios();
+ post_code(0x93);
+ vga_enable_console();
+
+
+}
+
+void write_protect_vgabios(void)
+{
+ device_t dev;
+
+ printk_info("write_protect_vgabios\n");
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, 0x3123, 0);
+ if(dev)
+ pci_write_config8(dev, 0x61, 0xaa);
+
+}
+
+static void
+enable(struct chip *chip, enum chip_pass pass)
+{
+
+ struct mainboard_tyan_s4882_config *conf =
+ (struct mainboard_tyan_s4882_config *)chip->chip_info;
+
+ switch (pass) {
+ default: break;
+// case CONF_PASS_PRE_CONSOLE:
+// case CONF_PASS_PRE_PCI:
+ case CONF_PASS_POST_PCI:
+// case CONF_PASS_PRE_BOOT:
+// if (conf->fixup_scsi)
+// onboard_scsi_fixup();
+// if (conf->fixup_vga)
+// vga_fixup();
+ printk_debug("mainboard fixup pass %d done\r\n",
+ pass);
+ break;
+ }
+
+}
static struct device_operations mainboard_operations = {
.read_resources = root_dev_read_resources,
.set_resources = root_dev_set_resources,
@@ -41,5 +94,6 @@ static void enumerate(struct chip *chip)
struct chip_control mainboard_via_epia_m_control = {
.enumerate = enumerate,
.name = "VIA EPIA-M mainboard ",
+ .enable = enable
};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 21:58:45 +0000