summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/msi/ms7135/romstage.c6
-rw-r--r--src/mainboard/msi/ms7260/romstage.c4
-rw-r--r--src/mainboard/msi/ms7721/buildOpts.c2
-rw-r--r--src/mainboard/msi/ms9185/mptable.c2
-rw-r--r--src/mainboard/msi/ms9185/romstage.c4
-rw-r--r--src/mainboard/msi/ms9282/romstage.c2
-rw-r--r--src/mainboard/msi/ms9652_fam10/romstage.c4
-rw-r--r--src/mainboard/nvidia/l1_2pvv/romstage.c4
-rw-r--r--src/mainboard/samsung/lumpy/acpi_tables.c2
-rw-r--r--src/mainboard/samsung/lumpy/romstage.c4
-rw-r--r--src/mainboard/samsung/stumpy/romstage.c6
-rw-r--r--src/mainboard/siemens/mc_bdx1/mainboard.c2
-rw-r--r--src/mainboard/siemens/mc_tcu3/mainboard.c2
-rw-r--r--src/mainboard/siemens/sitemp_g1p1/acpi_tables.c2
-rw-r--r--src/mainboard/siemens/sitemp_g1p1/mainboard.c10
-rw-r--r--src/mainboard/siemens/sitemp_g1p1/romstage.c2
-rw-r--r--src/mainboard/sunw/ultra40/romstage.c2
-rw-r--r--src/mainboard/sunw/ultra40m2/romstage.c4
-rw-r--r--src/mainboard/supermicro/h8dme/romstage.c6
-rw-r--r--src/mainboard/supermicro/h8dmr/romstage.c4
-rw-r--r--src/mainboard/supermicro/h8dmr_fam10/romstage.c4
-rw-r--r--src/mainboard/supermicro/h8qgi/buildOpts.c4
-rw-r--r--src/mainboard/supermicro/h8qgi/rd890_cfg.h4
-rw-r--r--src/mainboard/supermicro/h8qgi/sb700_cfg.h8
-rw-r--r--src/mainboard/supermicro/h8qme_fam10/romstage.c4
-rw-r--r--src/mainboard/supermicro/h8scm/rd890_cfg.h4
-rw-r--r--src/mainboard/supermicro/h8scm/sb700_cfg.h8
-rw-r--r--src/mainboard/supermicro/h8scm_fam10/romstage.c4
-rw-r--r--src/mainboard/technexion/tim5690/mainboard.c6
-rw-r--r--src/mainboard/technexion/tim5690/romstage.c2
-rw-r--r--src/mainboard/technexion/tim8690/romstage.c2
-rw-r--r--src/mainboard/thomson/ip1000/spd_table.h4
-rw-r--r--src/mainboard/tyan/s2912/romstage.c4
-rw-r--r--src/mainboard/tyan/s2912_fam10/romstage.c4
-rw-r--r--src/mainboard/tyan/s8226/buildOpts.c4
-rw-r--r--src/mainboard/tyan/s8226/rd890_cfg.h4
-rw-r--r--src/mainboard/tyan/s8226/sb700_cfg.h8
-rw-r--r--src/mainboard/via/epia-m850/mainboard.c4
-rw-r--r--src/mainboard/via/epia-m850/romstage.c2
-rw-r--r--src/mainboard/winent/mb6047/romstage.c4
40 files changed, 81 insertions, 81 deletions
diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c
index 08fbdc7e4d..c595006e14 100644
--- a/src/mainboard/msi/ms7135/romstage.c
+++ b/src/mainboard/msi/ms7135/romstage.c
@@ -41,7 +41,7 @@
#include <spd.h>
#include <northbridge/amd/amdk8/pre_f.h>
-#if CONFIG_HAVE_OPTION_TABLE
+#if IS_ENABLED(CONFIG_HAVE_OPTION_TABLE)
#include "option_table.h"
#endif
@@ -132,7 +132,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset = setup_coherent_ht_domain();
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
@@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
ms7135_set_nf4_voltage();
ms7135_set_ram_voltage();
-#if CONFIG_DEBUG_SMBUS
+#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
dump_spd_registers(&ctrl[0]);
dump_smbus_registers();
#endif
diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c
index 6feddcfef1..5287258a18 100644
--- a/src/mainboard/msi/ms7260/romstage.c
+++ b/src/mainboard/msi/ms7260/romstage.c
@@ -144,7 +144,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain(); /* Routing table and start other core0. */
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* It is said that we should start core1 after all core0 launched
* becase optimize_link_coherent_ht is moved out from
* setup_coherent_ht_domain, so here need to make sure last core0 is
@@ -158,7 +158,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Set up chains and store link pair for optimization later. */
ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr = rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/msi/ms7721/buildOpts.c b/src/mainboard/msi/ms7721/buildOpts.c
index ecb168c638..5191574fef 100644
--- a/src/mainboard/msi/ms7721/buildOpts.c
+++ b/src/mainboard/msi/ms7721/buildOpts.c
@@ -168,7 +168,7 @@
#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3
#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3
-#if CONFIG_GFXUMA
+#if IS_ENABLED(CONFIG_GFXUMA)
#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED
//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/
diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c
index 38cc72bbbc..e93602be1c 100644
--- a/src/mainboard/msi/ms9185/mptable.c
+++ b/src/mainboard/msi/ms9185/mptable.c
@@ -26,7 +26,7 @@
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
#include <cpu/amd/multicore.h>
#endif
#include <cpu/amd/amdk8_sysconf.h>
diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c
index 56eaa6ac8b..5d031795dc 100644
--- a/src/mainboard/msi/ms9185/romstage.c
+++ b/src/mainboard/msi/ms9185/romstage.c
@@ -123,7 +123,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain();
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -144,7 +144,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset |= optimize_link_incoherent_ht(sysinfo);
#endif
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c
index fd9049146a..4fa40bf0ce 100644
--- a/src/mainboard/msi/ms9282/romstage.c
+++ b/src/mainboard/msi/ms9282/romstage.c
@@ -154,7 +154,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
start_other_cores();
//wait_all_other_cores_started(bsp_apicid);
diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c
index 4acb240548..11e9bc0492 100644
--- a/src/mainboard/msi/ms9652_fam10/romstage.c
+++ b/src/mainboard/msi/ms9652_fam10/romstage.c
@@ -178,7 +178,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores(bsp_apicid);
@@ -189,7 +189,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x38);
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c
index b80f4f37d4..9c04b1cadc 100644
--- a/src/mainboard/nvidia/l1_2pvv/romstage.c
+++ b/src/mainboard/nvidia/l1_2pvv/romstage.c
@@ -142,7 +142,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/samsung/lumpy/acpi_tables.c b/src/mainboard/samsung/lumpy/acpi_tables.c
index 828546c1b1..65922f3d92 100644
--- a/src/mainboard/samsung/lumpy/acpi_tables.c
+++ b/src/mainboard/samsung/lumpy/acpi_tables.c
@@ -25,7 +25,7 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <ec/acpi/ec.h>
-#if CONFIG_CHROMEOS
+#if IS_ENABLED(CONFIG_CHROMEOS)
#include <vendorcode/google/chromeos/gnvs.h>
#endif
diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c
index 2a4bb4c6ea..3afb196448 100644
--- a/src/mainboard/samsung/lumpy/romstage.c
+++ b/src/mainboard/samsung/lumpy/romstage.c
@@ -38,7 +38,7 @@
#include <cpu/x86/msr.h>
#include <halt.h>
#include "option_table.h"
-#if CONFIG_DRIVERS_UART_8250IO
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)
#include <superio/smsc/lpc47n207/lpc47n207.h>
#endif
@@ -47,7 +47,7 @@ void pch_enable_lpc(void)
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_DRIVERS_UART_8250IO
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)
/* Enable SuperIO + EC + KBC + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
KBC_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN);
diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c
index c4df1e7d82..ec5368dbb0 100644
--- a/src/mainboard/samsung/stumpy/romstage.c
+++ b/src/mainboard/samsung/stumpy/romstage.c
@@ -38,12 +38,12 @@
#include <cpu/x86/msr.h>
#include <halt.h>
#include <tpm.h>
-#if CONFIG_DRIVERS_UART_8250IO
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)
#include <superio/smsc/lpc47n207/lpc47n207.h>
#endif
/* Stumpy USB Reset Disable defined in cmos.layout */
-#if CONFIG_USE_OPTION_TABLE
+#if IS_ENABLED(CONFIG_USE_OPTION_TABLE)
#include "option_table.h"
#define CMOS_USB_RESET_DISABLE (CMOS_VSTART_stumpy_usb_reset_disable >> 3)
#else
@@ -60,7 +60,7 @@ void pch_enable_lpc(void)
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_DRIVERS_UART_8250IO
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)
/* Enable SuperIO + PS/2 Keyboard/Mouse + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN |\
CNF2_LPC_EN | COMA_LPC_EN);
diff --git a/src/mainboard/siemens/mc_bdx1/mainboard.c b/src/mainboard/siemens/mc_bdx1/mainboard.c
index c20778d1f1..d4d84b5599 100644
--- a/src/mainboard/siemens/mc_bdx1/mainboard.c
+++ b/src/mainboard/siemens/mc_bdx1/mainboard.c
@@ -22,7 +22,7 @@
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
#include <x86emu/x86emu.h>
#endif
#include <pc80/mc146818rtc.h>
diff --git a/src/mainboard/siemens/mc_tcu3/mainboard.c b/src/mainboard/siemens/mc_tcu3/mainboard.c
index a11ff266ec..df084718fb 100644
--- a/src/mainboard/siemens/mc_tcu3/mainboard.c
+++ b/src/mainboard/siemens/mc_tcu3/mainboard.c
@@ -21,7 +21,7 @@
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <console/console.h>
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
#include <x86emu/x86emu.h>
#endif
#include <pc80/mc146818rtc.h>
diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c
index 0582566c90..30f963e729 100644
--- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c
+++ b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c
@@ -65,7 +65,7 @@ unsigned long acpi_fill_madt(unsigned long current)
/* Write SB600 IOAPIC, only one */
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
IO_APIC_ADDR, 0);
-#if !CONFIG_LINT01_CONVERSION
+#if !IS_ENABLED(CONFIG_LINT01_CONVERSION)
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 0, 2, 0);
diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c
index 1f266a7a00..bc2c75b752 100644
--- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c
+++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c
@@ -30,7 +30,7 @@
#include <southbridge/amd/rs690/chip.h>
#include <southbridge/amd/rs690/rs690.h>
#include <superio/ite/it8712f/it8712f.h>
-#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL)
#include <x86emu/x86emu.h>
#endif
#include "int15_func.h"
@@ -215,7 +215,7 @@ struct fan_control {
u8 t_range;
};
/* ############################################################################################# */
-#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL)
static int int15_handler(void)
{
#define BOOT_DISPLAY_DEFAULT 0
@@ -779,14 +779,14 @@ void smm_lock(void)
static void mainboard_init(device_t dev)
{
-#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE)
INT15_function_extensions int15_func;
#endif
printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n",
dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);
-#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE)
if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS)
int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO;
int15_func.regs.func05_TV_standard = TV_MODE_NO;
@@ -808,7 +808,7 @@ static void mainboard_enable(device_t dev)
printk(BIOS_INFO, "%s %s[%x/%x] %s\n",
dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);
-#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL)
/* Install custom int15 handler for VGA OPROM */
mainboard_interrupt_handlers(0x15, &int15_handler);
#endif
diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c
index 6ac79d1ab0..52d9c2381c 100644
--- a/src/mainboard/siemens/sitemp_g1p1/romstage.c
+++ b/src/mainboard/siemens/sitemp_g1p1/romstage.c
@@ -117,7 +117,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* It is said that we should start core1 after all core0 launched */
wait_all_core0_started();
start_other_cores();
diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c
index 13458716f7..405439fd9b 100644
--- a/src/mainboard/sunw/ultra40/romstage.c
+++ b/src/mainboard/sunw/ultra40/romstage.c
@@ -124,7 +124,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
needs_reset = setup_coherent_ht_domain();
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
diff --git a/src/mainboard/sunw/ultra40m2/romstage.c b/src/mainboard/sunw/ultra40m2/romstage.c
index 44bf8519a1..9145ca540d 100644
--- a/src/mainboard/sunw/ultra40m2/romstage.c
+++ b/src/mainboard/sunw/ultra40m2/romstage.c
@@ -135,7 +135,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -148,7 +148,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c
index d0ab05e027..f173d1a719 100644
--- a/src/mainboard/supermicro/h8dme/romstage.c
+++ b/src/mainboard/supermicro/h8dme/romstage.c
@@ -154,13 +154,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid);
set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
-#if CONFIG_DEBUG_SMBUS
+#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
dump_smbus_registers();
#endif
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -173,7 +173,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c
index e4ee1c842d..3f01c92ca5 100644
--- a/src/mainboard/supermicro/h8dmr/romstage.c
+++ b/src/mainboard/supermicro/h8dmr/romstage.c
@@ -137,7 +137,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -150,7 +150,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
index d457f1bd91..e100876d5a 100644
--- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c
@@ -173,7 +173,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores(bsp_apicid);
@@ -183,7 +183,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x38);
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n",
msr.hi, msr.lo);
diff --git a/src/mainboard/supermicro/h8qgi/buildOpts.c b/src/mainboard/supermicro/h8qgi/buildOpts.c
index 4db2c6f53c..b146afe0d6 100644
--- a/src/mainboard/supermicro/h8qgi/buildOpts.c
+++ b/src/mainboard/supermicro/h8qgi/buildOpts.c
@@ -426,10 +426,10 @@ CONST AP_MTRR_SETTINGS ROMDATA h8qgi_ap_mtrr_list[] =
*/
/*
-#if CONFIG_CPU_AMD_AGESA_FAMILY15
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15)
#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
#endif
-#if CONFIG_CPU_AMD_AGESA_FAMILY10
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10)
#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
#endif
*/
diff --git a/src/mainboard/supermicro/h8qgi/rd890_cfg.h b/src/mainboard/supermicro/h8qgi/rd890_cfg.h
index 35ddfbb5b5..6607094281 100644
--- a/src/mainboard/supermicro/h8qgi/rd890_cfg.h
+++ b/src/mainboard/supermicro/h8qgi/rd890_cfg.h
@@ -27,10 +27,10 @@
* [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
*/
#ifndef DEFAULT_HT_PATH
-#if CONFIG_CPU_AMD_AGESA_FAMILY10
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10)
#define DEFAULT_HT_PATH {0x0, 0x3}
#endif
-#if CONFIG_CPU_AMD_AGESA_FAMILY15
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15)
#define DEFAULT_HT_PATH {0x0, 0x1}
#endif
#endif
diff --git a/src/mainboard/supermicro/h8qgi/sb700_cfg.h b/src/mainboard/supermicro/h8qgi/sb700_cfg.h
index a5f371dbf1..62b618f70a 100644
--- a/src/mainboard/supermicro/h8qgi/sb700_cfg.h
+++ b/src/mainboard/supermicro/h8qgi/sb700_cfg.h
@@ -36,13 +36,13 @@
* before AGESA module get call.
*/
#ifndef BIOS_SIZE
-#if CONFIG_COREBOOT_ROMSIZE_KB_1024
+#if IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_1024)
#define BIOS_SIZE BIOS_SIZE_1M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_2048)
#define BIOS_SIZE BIOS_SIZE_2M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_4096)
#define BIOS_SIZE BIOS_SIZE_4M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_8192)
#define BIOS_SIZE BIOS_SIZE_8M
#endif
#endif
diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c
index 26f3da710a..3554a05fce 100644
--- a/src/mainboard/supermicro/h8qme_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c
@@ -239,7 +239,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores(bsp_apicid);
@@ -249,7 +249,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x38);
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/supermicro/h8scm/rd890_cfg.h b/src/mainboard/supermicro/h8scm/rd890_cfg.h
index 35ddfbb5b5..6607094281 100644
--- a/src/mainboard/supermicro/h8scm/rd890_cfg.h
+++ b/src/mainboard/supermicro/h8scm/rd890_cfg.h
@@ -27,10 +27,10 @@
* [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
*/
#ifndef DEFAULT_HT_PATH
-#if CONFIG_CPU_AMD_AGESA_FAMILY10
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10)
#define DEFAULT_HT_PATH {0x0, 0x3}
#endif
-#if CONFIG_CPU_AMD_AGESA_FAMILY15
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15)
#define DEFAULT_HT_PATH {0x0, 0x1}
#endif
#endif
diff --git a/src/mainboard/supermicro/h8scm/sb700_cfg.h b/src/mainboard/supermicro/h8scm/sb700_cfg.h
index c067095d3e..62b618f70a 100644
--- a/src/mainboard/supermicro/h8scm/sb700_cfg.h
+++ b/src/mainboard/supermicro/h8scm/sb700_cfg.h
@@ -36,13 +36,13 @@
* before AGESA module get call.
*/
#ifndef BIOS_SIZE
-#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1
+#if IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_1024)
#define BIOS_SIZE BIOS_SIZE_1M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_2048)
#define BIOS_SIZE BIOS_SIZE_2M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_4096)
#define BIOS_SIZE BIOS_SIZE_4M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_8192)
#define BIOS_SIZE BIOS_SIZE_8M
#endif
#endif
diff --git a/src/mainboard/supermicro/h8scm_fam10/romstage.c b/src/mainboard/supermicro/h8scm_fam10/romstage.c
index 091514d91a..60288e0329 100644
--- a/src/mainboard/supermicro/h8scm_fam10/romstage.c
+++ b/src/mainboard/supermicro/h8scm_fam10/romstage.c
@@ -153,7 +153,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores(bsp_apicid);
@@ -167,7 +167,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
sr5650_early_setup();
sb7xx_51xx_early_setup();
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c
index 8bc1075a8b..edc1170794 100644
--- a/src/mainboard/technexion/tim5690/mainboard.c
+++ b/src/mainboard/technexion/tim5690/mainboard.c
@@ -184,7 +184,7 @@ static void mb_gpio_init(u16 *iobase)
it8712f_exit_conf();
}
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
/* The LCD's panel id seletion. */
static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id)
{
@@ -221,7 +221,7 @@ static void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id)
static void mainboard_enable(device_t dev)
{
u16 gpio_base = IT8712F_SIMPLE_IO_BASE;
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
rs690_vbios_regs vbios_regs;
u8 port2;
#endif
@@ -230,7 +230,7 @@ static void mainboard_enable(device_t dev)
mb_gpio_init(&gpio_base);
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
/* The LCD's panel id seletion by switch. */
port2 = inb(gpio_base+1);
lcd_panel_id(&vbios_regs, ((~port2) & 0xf));
diff --git a/src/mainboard/technexion/tim5690/romstage.c b/src/mainboard/technexion/tim5690/romstage.c
index 3b4b4fd656..744ea67921 100644
--- a/src/mainboard/technexion/tim5690/romstage.c
+++ b/src/mainboard/technexion/tim5690/romstage.c
@@ -95,7 +95,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* It is said that we should start core1 after all core0 launched */
wait_all_core0_started();
start_other_cores();
diff --git a/src/mainboard/technexion/tim8690/romstage.c b/src/mainboard/technexion/tim8690/romstage.c
index 60308649dd..18e3140b11 100644
--- a/src/mainboard/technexion/tim8690/romstage.c
+++ b/src/mainboard/technexion/tim8690/romstage.c
@@ -91,7 +91,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* It is said that we should start core1 after all core0 launched */
wait_all_core0_started();
start_other_cores();
diff --git a/src/mainboard/thomson/ip1000/spd_table.h b/src/mainboard/thomson/ip1000/spd_table.h
index 0ecf1c0083..1de05edce1 100644
--- a/src/mainboard/thomson/ip1000/spd_table.h
+++ b/src/mainboard/thomson/ip1000/spd_table.h
@@ -16,11 +16,11 @@
#include <spd.h>
-#if CONFIG_ONBOARD_MEMORY_64MB
+#if IS_ENABLED(CONFIG_ONBOARD_MEMORY_64MB)
#define DENSITY 0x10
-#elif CONFIG_ONBOARD_MEMORY_128MB
+#elif IS_ENABLED(CONFIG_ONBOARD_MEMORY_128MB)
#define DENSITY 0x20
diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c
index 6a47612dbe..89f3175c25 100644
--- a/src/mainboard/tyan/s2912/romstage.c
+++ b/src/mainboard/tyan/s2912/romstage.c
@@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain(); // routing table and start other core0
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
// It is said that we should start core1 after all core0 launched
/* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain,
* So here need to make sure last core0 is started, esp for two way system,
@@ -153,7 +153,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* it will set up chains and store link pair for optimization later */
ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
{
msr_t msr;
msr = rdmsr(0xc0010042);
diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c
index 4c8c19f665..b449f77731 100644
--- a/src/mainboard/tyan/s2912_fam10/romstage.c
+++ b/src/mainboard/tyan/s2912_fam10/romstage.c
@@ -174,7 +174,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
*/
wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
+#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores(bsp_apicid);
@@ -184,7 +184,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x38);
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
msr = rdmsr(0xc0010071);
printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo);
diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c
index 13128920b9..e27ec163ee 100644
--- a/src/mainboard/tyan/s8226/buildOpts.c
+++ b/src/mainboard/tyan/s8226/buildOpts.c
@@ -426,10 +426,10 @@ CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] =
*/
/*
-#if CONFIG_CPU_AMD_AGESA_FAMILY15
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15)
#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
#endif
-#if CONFIG_CPU_AMD_AGESA_FAMILY10
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10)
#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
#endif
*/
diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h
index 35ddfbb5b5..6607094281 100644
--- a/src/mainboard/tyan/s8226/rd890_cfg.h
+++ b/src/mainboard/tyan/s8226/rd890_cfg.h
@@ -27,10 +27,10 @@
* [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0.
*/
#ifndef DEFAULT_HT_PATH
-#if CONFIG_CPU_AMD_AGESA_FAMILY10
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10)
#define DEFAULT_HT_PATH {0x0, 0x3}
#endif
-#if CONFIG_CPU_AMD_AGESA_FAMILY15
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15)
#define DEFAULT_HT_PATH {0x0, 0x1}
#endif
#endif
diff --git a/src/mainboard/tyan/s8226/sb700_cfg.h b/src/mainboard/tyan/s8226/sb700_cfg.h
index 3f82931684..bed9161f29 100644
--- a/src/mainboard/tyan/s8226/sb700_cfg.h
+++ b/src/mainboard/tyan/s8226/sb700_cfg.h
@@ -36,13 +36,13 @@
* before AGESA module get call.
*/
#ifndef BIOS_SIZE
-#if CONFIG_COREBOOT_ROMSIZE_KB_1024
+#if IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_1024)
#define BIOS_SIZE BIOS_SIZE_1M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_2048
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_2048)
#define BIOS_SIZE BIOS_SIZE_2M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_4096
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_4096)
#define BIOS_SIZE BIOS_SIZE_4M
-#elif CONFIG_COREBOOT_ROMSIZE_KB_8192
+#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_8192)
#define BIOS_SIZE BIOS_SIZE_8M
#endif
#endif
diff --git a/src/mainboard/via/epia-m850/mainboard.c b/src/mainboard/via/epia-m850/mainboard.c
index 335e86bdac..68c49bc237 100644
--- a/src/mainboard/via/epia-m850/mainboard.c
+++ b/src/mainboard/via/epia-m850/mainboard.c
@@ -19,7 +19,7 @@
#include <device/pci_ops.h>
#include <console/console.h>
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
#include <arch/interrupt.h>
#include <x86emu/x86emu.h>
@@ -96,7 +96,7 @@ static void mainboard_enable(device_t dev)
{
(void)dev;
-#if CONFIG_VGA_ROM_RUN
+#if IS_ENABLED(CONFIG_VGA_ROM_RUN)
printk(BIOS_DEBUG, "Installing INT15 handler...\n");
mainboard_interrupt_handlers(0x15, &vx900_int15_handler);
#endif
diff --git a/src/mainboard/via/epia-m850/romstage.c b/src/mainboard/via/epia-m850/romstage.c
index 450f7d7a63..a79d419a39 100644
--- a/src/mainboard/via/epia-m850/romstage.c
+++ b/src/mainboard/via/epia-m850/romstage.c
@@ -90,7 +90,7 @@ void main(unsigned long bist)
printk(BIOS_DEBUG, "We passed RAM verify\n");
/* We got RAM working, now we can write the timestamps to RAM */
-#if CONFIG_EARLY_CBMEM_INIT
+#if IS_ENABLED(CONFIG_EARLY_CBMEM_INIT)
cbmem_recovery(0);
#endif
/* FIXME: See if this is needed or take this out please */
diff --git a/src/mainboard/winent/mb6047/romstage.c b/src/mainboard/winent/mb6047/romstage.c
index 09de180972..ddce5c6954 100644
--- a/src/mainboard/winent/mb6047/romstage.c
+++ b/src/mainboard/winent/mb6047/romstage.c
@@ -37,7 +37,7 @@ int spd_read_byte(unsigned device, unsigned address)
#include <southbridge/nvidia/ck804/early_setup_ss.h>
#include "southbridge/nvidia/ck804/early_setup_car.c"
#include "cpu/amd/model_fxx/init_cpus.c"
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
#include "cpu/amd/model_fxx/fidvid.c"
#endif
#include "northbridge/amd/amdk8/early_ht.c"
@@ -100,7 +100,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
-#if CONFIG_SET_FIDVID
+#if IS_ENABLED(CONFIG_SET_FIDVID)
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
if ((cpuid_edx(0x80000007) & 0x6) == 0x6) {