summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/ibase/mb899/superio_hwm.c62
-rw-r--r--src/mainboard/kontron/986lcd-m/mainboard.c58
2 files changed, 52 insertions, 68 deletions
diff --git a/src/mainboard/ibase/mb899/superio_hwm.c b/src/mainboard/ibase/mb899/superio_hwm.c
index 7fb45f91f2..a7f6acf97a 100644
--- a/src/mainboard/ibase/mb899/superio_hwm.c
+++ b/src/mainboard/ibase/mb899/superio_hwm.c
@@ -19,6 +19,7 @@
#include <console/console.h>
#include <device/device.h>
#include <pc80/mc146818rtc.h>
+#include <superio/hwm5_conf.h>
#include "superio_hwm.h"
@@ -33,17 +34,6 @@
#define HWM_BASE 0x290
-static void hwm_write(u8 reg, u8 value)
-{
- outb(reg, HWM_BASE + 0x05);
- outb(value, HWM_BASE + 0x06);
-}
-
-static void hwm_bank(u8 bank)
-{
- hwm_write(0x4e, bank);
-}
-
struct fan_speed {
u8 fan_in;
u16 fan_speed;
@@ -90,19 +80,19 @@ void hwm_setup(void)
//sysfan_temperature = FAN_TEMPERATURE_30DEGC;
//get_option(&sysfan_temperature, "sysfan_temperature");
- // hwm_write(0x31, 0x20); // AVCC high limit
- // hwm_write(0x34, 0x06); // VIN2 low limit
+ // pnp_write_hwm5_index(HWM_BASE, 0x31, 0x20); // AVCC high limit
+ // pnp_write_hwm5_index(HWM_BASE, 0x34, 0x06); // VIN2 low limit
- hwm_bank(0);
- hwm_write(0x59, 0x20); // Diode Selection
- hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor
+ pnp_write_hwm5_index(HWM_BASE, 0x4e, 0);
+ pnp_write_hwm5_index(HWM_BASE, 0x59, 0x20); // Diode Selection
+ pnp_write_hwm5_index(HWM_BASE, 0x5d, 0x0f); // All Sensors Diode, not Thermistor
- hwm_bank(4);
- hwm_write(0x54, 0xf1); // SYSTIN temperature offset
- hwm_write(0x55, 0x19); // CPUTIN temperature offset
- hwm_write(0x56, 0xfc); // AUXTIN temperature offset
+ pnp_write_hwm5_index(HWM_BASE, 0x4e, 4);
+ pnp_write_hwm5_index(HWM_BASE, 0x54, 0xf1); // SYSTIN temperature offset
+ pnp_write_hwm5_index(HWM_BASE, 0x55, 0x19); // CPUTIN temperature offset
+ pnp_write_hwm5_index(HWM_BASE, 0x56, 0xfc); // AUXTIN temperature offset
- hwm_bank(0x80); // Default
+ pnp_write_hwm5_index(HWM_BASE, 0x4e, 0x80); // Default
u8 fan_config = 0;
// 00 FANOUT is Manual Mode
@@ -117,41 +107,43 @@ void hwm_setup(void)
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
}
// This register must be written first
- hwm_write(0x04, fan_config);
+ pnp_write_hwm5_index(HWM_BASE, 0x04, fan_config);
switch (cpufan_control) {
- case FAN_CRUISE_CONTROL_SPEED:
+ case FAN_CRUISE_CONTROL_SPEED: /* CPUFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n",
fan_speeds[cpufan_speed].fan_speed);
- hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed
+ pnp_write_hwm5_index(HWM_BASE, 0x06, fan_speeds[cpufan_speed].fan_in);
break;
- case FAN_CRUISE_CONTROL_THERMAL:
+ case FAN_CRUISE_CONTROL_THERMAL: /* CPUFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
temperatures[cpufan_temperature].deg_celsius,
temperatures[cpufan_temperature].deg_fahrenheit);
- hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature
+ pnp_write_hwm5_index(HWM_BASE, 0x06,
+ temperatures[cpufan_temperature].deg_celsius);
break;
}
switch (sysfan_control) {
- case FAN_CRUISE_CONTROL_SPEED:
+ case FAN_CRUISE_CONTROL_SPEED: /* SYSFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n",
fan_speeds[sysfan_speed].fan_speed);
- hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed
+ pnp_write_hwm5_index(HWM_BASE, 0x05, fan_speeds[sysfan_speed].fan_in);
break;
- case FAN_CRUISE_CONTROL_THERMAL:
+ case FAN_CRUISE_CONTROL_THERMAL: /* SYSFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
temperatures[sysfan_temperature].deg_celsius,
temperatures[sysfan_temperature].deg_fahrenheit);
- hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature
+ pnp_write_hwm5_index(HWM_BASE,
+ 0x05, temperatures[sysfan_temperature].deg_celsius);
break;
}
- hwm_write(0x0e, 0x02); // Fan Output Step Down Time
- hwm_write(0x0f, 0x02); // Fan Output Step Up Time
+ pnp_write_hwm5_index(HWM_BASE, 0x0e, 0x02); // Fan Output Step Down Time
+ pnp_write_hwm5_index(HWM_BASE, 0x0f, 0x02); // Fan Output Step Up Time
- hwm_write(0x47, 0xaf); // FAN divisor register
- hwm_write(0x4b, 0x84); // AUXFANIN speed divisor
+ pnp_write_hwm5_index(HWM_BASE, 0x47, 0xaf); // FAN divisor register
+ pnp_write_hwm5_index(HWM_BASE, 0x4b, 0x84); // AUXFANIN speed divisor
- hwm_write(0x40, 0x01); // Init, but no SMI#
+ pnp_write_hwm5_index(HWM_BASE, 0x40, 0x01); // Init, but no SMI#
}
diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
index 85b704e3dd..509e894507 100644
--- a/src/mainboard/kontron/986lcd-m/mainboard.c
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -21,22 +21,12 @@
#include <drivers/intel/gma/int15.h>
#include <pc80/mc146818rtc.h>
#include <arch/io.h>
+#include <superio/hwm5_conf.h>
/* Hardware Monitor */
static u16 hwm_base = 0xa00;
-static void hwm_write(u8 reg, u8 value)
-{
- outb(reg, hwm_base + 0x05);
- outb(value, hwm_base + 0x06);
-}
-
-static void hwm_bank(u8 bank)
-{
- hwm_write(0x4e, bank);
-}
-
#define FAN_CRUISE_CONTROL_DISABLED 0
#define FAN_CRUISE_CONTROL_SPEED 1
#define FAN_CRUISE_CONTROL_THERMAL 2
@@ -86,16 +76,16 @@ static void hwm_setup(void)
sysfan_speed = FAN_SPEED_5625;
get_option(&sysfan_speed, "sysfan_speed");
- hwm_bank(0);
- hwm_write(0x59, 0x20); /* Diode Selection */
- hwm_write(0x5d, 0x0f); /* All Sensors Diode, not Thermistor */
+ pnp_write_hwm5_index(hwm_base, 0x4e, 0);
+ pnp_write_hwm5_index(hwm_base, 0x59, 0x20); /* Diode Selection */
+ pnp_write_hwm5_index(hwm_base, 0x5d, 0x0f); /* All Sensors Diode, not Thermistor */
- hwm_bank(4);
- hwm_write(0x54, 0xf1); /* SYSTIN temperature offset */
- hwm_write(0x55, 0x19); /* CPUTIN temperature offset */
- hwm_write(0x56, 0xfc); /* AUXTIN temperature offset */
+ pnp_write_hwm5_index(hwm_base, 0x4e, 4);
+ pnp_write_hwm5_index(hwm_base, 0x54, 0xf1); /* SYSTIN temperature offset */
+ pnp_write_hwm5_index(hwm_base, 0x55, 0x19); /* CPUTIN temperature offset */
+ pnp_write_hwm5_index(hwm_base, 0x56, 0xfc); /* AUXTIN temperature offset */
- hwm_bank(0x80); /* Default */
+ pnp_write_hwm5_index(hwm_base, 0x4e, 0x80); /* Default */
u8 fan_config = 0;
/* 00 FANOUT is Manual Mode */
@@ -110,43 +100,45 @@ static void hwm_setup(void)
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
}
/* This register must be written first */
- hwm_write(0x04, fan_config);
+ pnp_write_hwm5_index(hwm_base, 0x04, fan_config);
switch (cpufan_control) {
- case FAN_CRUISE_CONTROL_SPEED:
+ case FAN_CRUISE_CONTROL_SPEED: /* CPUFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n",
fan_speeds[cpufan_speed].fan_speed);
- hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); /* CPUFANIN target speed */
+ pnp_write_hwm5_index(hwm_base, 0x06, fan_speeds[cpufan_speed].fan_in);
break;
- case FAN_CRUISE_CONTROL_THERMAL:
+ case FAN_CRUISE_CONTROL_THERMAL: /* CPUFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
temperatures[cpufan_temperature].deg_celsius,
temperatures[cpufan_temperature].deg_fahrenheit);
- hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); /* CPUFANIN target temperature */
+ pnp_write_hwm5_index(hwm_base, 0x06,
+ temperatures[cpufan_temperature].deg_celsius);
break;
}
switch (sysfan_control) {
- case FAN_CRUISE_CONTROL_SPEED:
+ case FAN_CRUISE_CONTROL_SPEED: /* SYSFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n",
fan_speeds[sysfan_speed].fan_speed);
- hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); /* SYSFANIN target speed */
+ pnp_write_hwm5_index(hwm_base, 0x05, fan_speeds[sysfan_speed].fan_in);
break;
- case FAN_CRUISE_CONTROL_THERMAL:
+ case FAN_CRUISE_CONTROL_THERMAL: /* SYSFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
temperatures[sysfan_temperature].deg_celsius,
temperatures[sysfan_temperature].deg_fahrenheit);
- hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); /* SYSFANIN target temperature */
+ pnp_write_hwm5_index(hwm_base, 0x05,
+ temperatures[sysfan_temperature].deg_celsius);
break;
}
- hwm_write(0x0e, 0x02); /* Fan Output Step Down Time */
- hwm_write(0x0f, 0x02); /* Fan Output Step Up Time */
+ pnp_write_hwm5_index(hwm_base, 0x0e, 0x02); /* Fan Output Step Down Time */
+ pnp_write_hwm5_index(hwm_base, 0x0f, 0x02); /* Fan Output Step Up Time */
- hwm_write(0x47, 0xaf); /* FAN divisor register */
- hwm_write(0x4b, 0x84); /* AUXFANIN speed divisor */
+ pnp_write_hwm5_index(hwm_base, 0x47, 0xaf); /* FAN divisor register */
+ pnp_write_hwm5_index(hwm_base, 0x4b, 0x84); /* AUXFANIN speed divisor */
- hwm_write(0x40, 0x01); /* Init, but no SMI# */
+ pnp_write_hwm5_index(hwm_base, 0x40, 0x01); /* Init, but no SMI# */
}
/* mainboard_enable is executed as first thing after */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 14:09:37 +0000