diff options
Diffstat (limited to 'src/mainboard')
161 files changed, 872 insertions, 872 deletions
diff --git a/src/mainboard/a-trend/atc-6220/Options.lb b/src/mainboard/a-trend/atc-6220/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/a-trend/atc-6220/Options.lb +++ b/src/mainboard/a-trend/atc-6220/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/advantech/pcm-5820/Options.lb b/src/mainboard/advantech/pcm-5820/Options.lb index 3c8d9b133e..b8199f1a54 100644 --- a/src/mainboard/advantech/pcm-5820/Options.lb +++ b/src/mainboard/advantech/pcm-5820/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/agami/aruma/Config.lb b/src/mainboard/agami/aruma/Config.lb index c8cdcd8bd5..b327bf651f 100644 --- a/src/mainboard/agami/aruma/Config.lb +++ b/src/mainboard/agami/aruma/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -145,7 +145,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc @@ -163,7 +163,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -193,7 +193,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/agami/aruma/Options.lb b/src/mainboard/agami/aruma/Options.lb index 04fff60e3b..47eb59fa7f 100644 --- a/src/mainboard/agami/aruma/Options.lb +++ b/src/mainboard/agami/aruma/Options.lb @@ -37,7 +37,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CC uses HOSTCC @@ -140,7 +140,7 @@ default ACPI_SSDTX_NUM=3 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -196,10 +196,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x36c0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -218,7 +218,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -262,7 +262,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately @@ -275,7 +275,7 @@ default TTYS0_LCS=0x3 ## SPEW 9 Way too many details -## These values can be overwritten by LinuxBIOSv2/targets/agami/aruma/Config.lb +## These values can be overwritten by corebootv2/targets/agami/aruma/Config.lb ## Request this level of debugging output default DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging diff --git a/src/mainboard/agami/aruma/acpi_tables_static.c b/src/mainboard/agami/aruma/acpi_tables_static.c index 3ff0d717c9..b20a7d72e5 100644 --- a/src/mainboard/agami/aruma/acpi_tables_static.c +++ b/src/mainboard/agami/aruma/acpi_tables_static.c @@ -83,7 +83,7 @@ unsigned long acpi_fill_madt(unsigned long current) /* The next two tables are used by our DSDT and are freely defined * here. This construct is used because the bus numbers containing - * the 8131 bridges may vary so that we need to pass LinuxBIOS + * the 8131 bridges may vary so that we need to pass coreboot * knowledge into the DSDT */ typedef struct lnxc_busses { @@ -96,7 +96,7 @@ typedef struct acpi_lnxb { acpi_lnxb_busses_t busses[5]; } acpi_lnxb_t; -/* special linuxbios acpi table */ +/* special coreboot acpi table */ void acpi_create_lnxb(acpi_lnxb_t *lnxb) { device_t dev; diff --git a/src/mainboard/amd/db800/Config.lb b/src/mainboard/amd/db800/Config.lb index 975def30c0..56dd3f67e1 100644 --- a/src/mainboard/amd/db800/Config.lb +++ b/src/mainboard/amd/db800/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -62,7 +62,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -70,7 +70,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -90,7 +90,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/amd/db800/Options.lb b/src/mainboard/amd/db800/Options.lb index ea0e708feb..6a0dc3f8c0 100644 --- a/src/mainboard/amd/db800/Options.lb +++ b/src/mainboard/amd/db800/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -70,7 +70,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -92,10 +92,10 @@ default IRQ_SLOT_COUNT=4 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -158,7 +158,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/amd/norwich/Config.lb b/src/mainboard/amd/norwich/Config.lb index 24fc3f46b4..a7cf5552e9 100644 --- a/src/mainboard/amd/norwich/Config.lb +++ b/src/mainboard/amd/norwich/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -64,7 +64,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -72,7 +72,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -92,7 +92,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/amd/norwich/Options.lb b/src/mainboard/amd/norwich/Options.lb index d549c9688e..0d4b2239ff 100644 --- a/src/mainboard/amd/norwich/Options.lb +++ b/src/mainboard/amd/norwich/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -70,7 +70,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -92,10 +92,10 @@ default IRQ_SLOT_COUNT=6 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -158,7 +158,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/amd/rumba/Config.lb b/src/mainboard/amd/rumba/Config.lb index ffa06d5e09..f7a9616693 100644 --- a/src/mainboard/amd/rumba/Config.lb +++ b/src/mainboard/amd/rumba/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/amd/rumba/Options.lb b/src/mainboard/amd/rumba/Options.lb index 0d44ee1864..e929289261 100644 --- a/src/mainboard/amd/rumba/Options.lb +++ b/src/mainboard/amd/rumba/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -60,7 +60,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -82,10 +82,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -141,7 +141,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/amd/serengeti_cheetah/Config.lb b/src/mainboard/amd/serengeti_cheetah/Config.lb index f54c423fbd..6948a70948 100644 --- a/src/mainboard/amd/serengeti_cheetah/Config.lb +++ b/src/mainboard/amd/serengeti_cheetah/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -154,7 +154,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT @@ -181,7 +181,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -215,7 +215,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/amd/serengeti_cheetah/Options.lb b/src/mainboard/amd/serengeti_cheetah/Options.lb index 0b2f24e991..9cdc29dac9 100644 --- a/src/mainboard/amd/serengeti_cheetah/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah/Options.lb @@ -40,7 +40,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -122,7 +122,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -149,7 +149,7 @@ default ACPI_SSDTX_NUM=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -237,10 +237,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -259,7 +259,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -309,7 +309,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt b/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt index 2fb327daec..99a89f94e4 100644 --- a/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt +++ b/src/mainboard/amd/serengeti_cheetah/readme_acpi.txt @@ -1,7 +1,7 @@ At this time, For acpi support We got -1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) -2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) -3. support DSDT ---- dynamically (Compile time, LinuxBIOS run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) +1. support AMK K8 SRAT --- dynamically (coreboot run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) +2. support MADT ---- dynamically (coreboot run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_cheetah/acpi_tables.c) +3. support DSDT ---- dynamically (Compile time, coreboot run-time, ACPI run-time) (src/mainboard/amd/serengeti_cheetah/{dx/*, get_bus_conf.c}, src/northbridge/amd/amdk8/get_sblk_pci1234.c) 4. Chipset support: amd8111, amd8132 The developers need to change for different MB @@ -11,7 +11,7 @@ Change dx/dsdt_lb.dsl, according to MB layout if there is HT-IO board, may use pci2.asl.... to create ssdt2.c, and ssdt3,c and ssdt4.c, ....ssdt8.c Change acpi_tables.c - sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is LinuxBIOS run-time configurable now. + sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents. ---- Actually you don't need to change it, it is coreboot run-time configurable now. if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed Regarding pci bridge apic and pic diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb index ac7375a6ae..ec46406291 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Config.lb @@ -19,7 +19,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -36,18 +36,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -163,7 +163,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT @@ -190,7 +190,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -225,7 +225,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb index cb68daa181..1382aa2d55 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb +++ b/src/mainboard/amd/serengeti_cheetah_fam10/Options.lb @@ -59,7 +59,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -147,7 +147,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -174,7 +174,7 @@ default ACPI_SSDTX_NUM=31 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -261,10 +261,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -283,7 +283,7 @@ default HEAP_SIZE=0xc0000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00200000 @@ -334,7 +334,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb index 68a3f56788..3c4804ace0 100644 --- a/src/mainboard/arima/hdama/Config.lb +++ b/src/mainboard/arima/hdama/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -91,7 +91,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -111,7 +111,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -141,7 +141,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 9f712b883f..adb5f601bd 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -82,7 +82,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -104,7 +104,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -145,10 +145,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -167,7 +167,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -216,7 +216,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/artecgroup/dbe61/Config.lb b/src/mainboard/artecgroup/dbe61/Config.lb index 40f157f6e9..58c833ea95 100644 --- a/src/mainboard/artecgroup/dbe61/Config.lb +++ b/src/mainboard/artecgroup/dbe61/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -60,7 +60,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -68,7 +68,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -88,7 +88,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/artecgroup/dbe61/Options.lb b/src/mainboard/artecgroup/dbe61/Options.lb index 3f773af79c..d95f0a9bf7 100644 --- a/src/mainboard/artecgroup/dbe61/Options.lb +++ b/src/mainboard/artecgroup/dbe61/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -70,7 +70,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -93,10 +93,10 @@ default IRQ_SLOT_COUNT=3 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -159,7 +159,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/artecgroup/dbe61/realmode/vgabios.c b/src/mainboard/artecgroup/dbe61/realmode/vgabios.c index 9f3b28d5b7..ac9c1bdf02 100644 --- a/src/mainboard/artecgroup/dbe61/realmode/vgabios.c +++ b/src/mainboard/artecgroup/dbe61/realmode/vgabios.c @@ -66,7 +66,7 @@ *--------------------------------------------------------------------*/ /* Modified to be a self sufficient plug in so that it can be used - without reliance on other parts of core Linuxbios + without reliance on other parts of core coreboot (C) 2005 Nick.Barker9@btinternet.com Used initially for epia-m where there are problems getting the bios @@ -442,10 +442,10 @@ struct realidt { // that simplifies a lot of things ... // we'll just push all the registers on the stack as longwords, // and pop to protected mode. -// second, since this only ever runs as part of linuxbios, +// second, since this only ever runs as part of coreboot, // we know all the segment register values -- so we don't save any. // keep the handler that calls things small. It can do a call to -// more complex code in linuxbios itself. This helps a lot as we don't +// more complex code in coreboot itself. This helps a lot as we don't // have to do address fixup in this little stub, and calls are absolute // so the handler is relocatable. void handler_vga(void) @@ -921,7 +921,7 @@ static void vga_init(device_t dev) pci_dev_init(dev); - // code to make vga init run in real mode - does work but against the current Linuxbios philosophy + // code to make vga init run in real mode - does work but against the current coreboot philosophy printk_debug("INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); printk_debug("DO THE VGA BIOS\n"); diff --git a/src/mainboard/asi/mb_5blmp/Config.lb b/src/mainboard/asi/mb_5blmp/Config.lb index 74597a967f..fdf8f83097 100644 --- a/src/mainboard/asi/mb_5blmp/Config.lb +++ b/src/mainboard/asi/mb_5blmp/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -71,7 +71,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -79,7 +79,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -99,7 +99,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb index 51e8dcdc75..c1bf6cd517 100644 --- a/src/mainboard/asi/mb_5blmp/Options.lb +++ b/src/mainboard/asi/mb_5blmp/Options.lb @@ -7,7 +7,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -57,7 +57,7 @@ default ROM_SIZE = 256 * 1024 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -78,10 +78,10 @@ default IRQ_SLOT_COUNT=5 # TODO? # default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 64 * 1024 default FALLBACK_SIZE = 128 * 1024 @@ -137,7 +137,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb index db635e52d4..07a7ade1aa 100644 --- a/src/mainboard/asus/a8n_e/Config.lb +++ b/src/mainboard/asus/a8n_e/Config.lb @@ -23,7 +23,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -39,18 +39,18 @@ else end ## -## Compute the start location and size size of the LinuxBIOS bootloader. +## Compute the start location and size size of the coreboot bootloader. ## default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of LinuxBIOS will start in the boot ROM. +## Compute where this copy of coreboot will start in the boot ROM. ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up LinuxBIOS +## Compute a range of ROM that can be cached to speed up coreboot ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte) @@ -106,7 +106,7 @@ if USE_DCACHE_RAM end ## -## Build our 16 bit and 32 bit LinuxBIOS entry code. +## Build our 16 bit and 32 bit coreboot entry code. ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -130,7 +130,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (this is where LinuxBIOS is entered). +## Build our reset vector (this is where coreboot is entered). ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -186,7 +186,7 @@ end ### -### This is the early phase of LinuxBIOS startup. +### This is the early phase of coreboot startup. ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb index 392c0bc1b4..e4eef79986 100644 --- a/src/mainboard/asus/a8n_e/Options.lb +++ b/src/mainboard/asus/a8n_e/Options.lb @@ -59,7 +59,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -127,7 +127,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -149,7 +149,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -223,10 +223,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = (64*1024) #65536 @@ -247,7 +247,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -296,7 +296,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb index a8b1a1c3bc..e95511a647 100644 --- a/src/mainboard/asus/a8v-e_se/Config.lb +++ b/src/mainboard/asus/a8v-e_se/Config.lb @@ -23,7 +23,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -35,19 +35,19 @@ ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -97,7 +97,7 @@ if USE_DCACHE_RAM end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE @@ -122,7 +122,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE @@ -141,7 +141,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb index 6c57edecdb..b6c5cea799 100644 --- a/src/mainboard/asus/a8v-e_se/Options.lb +++ b/src/mainboard/asus/a8v-e_se/Options.lb @@ -56,7 +56,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -121,7 +121,7 @@ default FALLBACK_SIZE=256 * 1024 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -143,7 +143,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=0 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -217,10 +217,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1043 #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 64 * 1024 ## @@ -242,7 +242,7 @@ default HEAP_SIZE=256 * 1024 ##default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -291,7 +291,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb index b02013191d..d4cf5e307f 100644 --- a/src/mainboard/asus/mew-am/Options.lb +++ b/src/mainboard/asus/mew-am/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/asus/mew-vm/Config.lb b/src/mainboard/asus/mew-vm/Config.lb index ade4ffd1ec..76a74a3425 100644 --- a/src/mainboard/asus/mew-vm/Config.lb +++ b/src/mainboard/asus/mew-vm/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb index 3f8775f2e6..da63cffd9e 100644 --- a/src/mainboard/asus/mew-vm/Options.lb +++ b/src/mainboard/asus/mew-vm/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -60,7 +60,7 @@ default HAVE_FALLBACK_BOOT = 1 default HAVE_MP_TABLE = 0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET = 0 @@ -79,10 +79,10 @@ default HAVE_OPTION_TABLE = 0 default CONFIG_IDE = 1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -138,7 +138,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/asus/p2b-f/Options.lb +++ b/src/mainboard/asus/p2b-f/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb index 8653db38aa..4038c3c7d5 100644 --- a/src/mainboard/asus/p2b/Options.lb +++ b/src/mainboard/asus/p2b/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/asus/p3b-f/Options.lb +++ b/src/mainboard/asus/p3b-f/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb index 15cf5acd82..36fde166bc 100644 --- a/src/mainboard/axus/tc320/Options.lb +++ b/src/mainboard/axus/tc320/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/axus/tc320/irq_tables.c b/src/mainboard/axus/tc320/irq_tables.c index c5ac51861d..8a8ada270a 100644 --- a/src/mainboard/axus/tc320/irq_tables.c +++ b/src/mainboard/axus/tc320/irq_tables.c @@ -24,7 +24,7 @@ * It was not possible to read back the PIRQ table. There was no BIOS to ask * for it, only a bootloader for an embedded OS. * But with the method described here: - * http://linuxbios.org/Creating_Valid_IRQ_Tables + * http://coreboot.org/Creating_Valid_IRQ_Tables * it was possible to detect the physical IRQ routing on this board. * * This is the physical routing on this board: diff --git a/src/mainboard/azza/pt-6ibd/Options.lb b/src/mainboard/azza/pt-6ibd/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/azza/pt-6ibd/Options.lb +++ b/src/mainboard/azza/pt-6ibd/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb index 1d6d9e18ec..4e4e21fc25 100644 --- a/src/mainboard/bcom/winnet100/Options.lb +++ b/src/mainboard/bcom/winnet100/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/biostar/m6tba/Options.lb b/src/mainboard/biostar/m6tba/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/biostar/m6tba/Options.lb +++ b/src/mainboard/biostar/m6tba/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/broadcom/blast/Config.lb b/src/mainboard/broadcom/blast/Config.lb index c9a22ca523..37681996fb 100644 --- a/src/mainboard/broadcom/blast/Config.lb +++ b/src/mainboard/broadcom/blast/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -72,7 +72,7 @@ if USE_DCACHE_RAM end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -88,7 +88,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -112,7 +112,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/broadcom/blast/Options.lb b/src/mainboard/broadcom/blast/Options.lb index d02aa9796f..6142896092 100644 --- a/src/mainboard/broadcom/blast/Options.lb +++ b/src/mainboard/broadcom/blast/Options.lb @@ -36,7 +36,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -89,7 +89,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -111,7 +111,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -168,10 +168,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -190,7 +190,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -239,7 +239,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb +++ b/src/mainboard/compaq/deskpro_en_sff_p600/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/dell/s1850/Config.lb b/src/mainboard/dell/s1850/Config.lb index af2133a739..6be46d3ed4 100644 --- a/src/mainboard/dell/s1850/Config.lb +++ b/src/mainboard/dell/s1850/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/dell/s1850/Options.lb b/src/mainboard/dell/s1850/Options.lb index d92a8fd0a3..369cbe542d 100644 --- a/src/mainboard/dell/s1850/Options.lb +++ b/src/mainboard/dell/s1850/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/digitallogic/adl855pc/Config.lb b/src/mainboard/digitallogic/adl855pc/Config.lb index 0888104513..7e6dcff573 100644 --- a/src/mainboard/digitallogic/adl855pc/Config.lb +++ b/src/mainboard/digitallogic/adl855pc/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -69,7 +69,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -77,7 +77,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -97,7 +97,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/digitallogic/adl855pc/Options.lb b/src/mainboard/digitallogic/adl855pc/Options.lb index f4c9d0548d..547113475e 100644 --- a/src/mainboard/digitallogic/adl855pc/Options.lb +++ b/src/mainboard/digitallogic/adl855pc/Options.lb @@ -11,7 +11,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -57,7 +57,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -79,10 +79,10 @@ default IRQ_SLOT_COUNT=5 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb index 2ea32e6ba0..bd3f1958d4 100644 --- a/src/mainboard/digitallogic/msm586seg/Config.lb +++ b/src/mainboard/digitallogic/msm586seg/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## default ROM_SIZE = 512 * 1024 default FALLBACK_SIZE = 0x10000 @@ -14,18 +14,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -71,7 +71,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -79,7 +79,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -99,7 +99,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb index b87885271b..2b763438ae 100644 --- a/src/mainboard/digitallogic/msm586seg/Options.lb +++ b/src/mainboard/digitallogic/msm586seg/Options.lb @@ -12,7 +12,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -70,7 +70,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -87,10 +87,10 @@ default IRQ_SLOT_COUNT=7 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb index 6294701e4c..41fd678a90 100644 --- a/src/mainboard/digitallogic/msm800sev/Config.lb +++ b/src/mainboard/digitallogic/msm800sev/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -61,7 +61,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -69,7 +69,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -89,7 +89,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/digitallogic/msm800sev/Options.lb b/src/mainboard/digitallogic/msm800sev/Options.lb index 8e2361b25a..cdab41a892 100644 --- a/src/mainboard/digitallogic/msm800sev/Options.lb +++ b/src/mainboard/digitallogic/msm800sev/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -70,7 +70,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -92,10 +92,10 @@ default IRQ_SLOT_COUNT=6 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -158,7 +158,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c b/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c index 1282bd5554..6842f09a17 100644 --- a/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c +++ b/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c @@ -101,7 +101,7 @@ void cache_as_ram_main(void) Just wbinvd the stack to clear the cache tags. We don't care where the stack used to be. 2. This file is built as a normal .c -> .o and linked in etc. The stack might be used to return etc. That means we care about what is in the stack. If we are smart we set the CAR stack to the same location - as the rest of LinuxBIOS. If that is the case we can just do a wbinvd. The stack will be written into real + as the rest of coreboot. If that is the case we can just do a wbinvd. The stack will be written into real RAM that is now setup and we continue like nothing happened. If the stack is located somewhere other than where LB would like it, you need to write some code to do a copy from cache to RAM diff --git a/src/mainboard/eaglelion/5bcm/Config.lb b/src/mainboard/eaglelion/5bcm/Config.lb index e0ef7fdbdd..9ad29487ad 100644 --- a/src/mainboard/eaglelion/5bcm/Config.lb +++ b/src/mainboard/eaglelion/5bcm/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/eaglelion/5bcm/Options.lb b/src/mainboard/eaglelion/5bcm/Options.lb index adc3d1b02a..280f582845 100644 --- a/src/mainboard/eaglelion/5bcm/Options.lb +++ b/src/mainboard/eaglelion/5bcm/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -61,7 +61,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -83,10 +83,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -142,7 +142,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/embeddedplanet/ep405pc/Config.lb b/src/mainboard/embeddedplanet/ep405pc/Config.lb index a47d1c6487..551eebca67 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Config.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Config.lb @@ -23,5 +23,5 @@ end ## Build the objects we have code for in this directory. ## -addaction linuxbios.a "$(CROSS_COMPILE)ranlib linuxbios.a" +addaction coreboot.a "$(CROSS_COMPILE)ranlib coreboot.a" makedefine CFLAGS += -msoft-float diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb index c0aa4e0506..4078fb4144 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Options.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Options.lb @@ -44,7 +44,7 @@ uses STACK_SIZE HEAP_SIZE uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -106,7 +106,7 @@ default ROM_SIZE=1048576 ## Board has fixed size RAM default EMBEDDED_RAM_SIZE=64*1024*1024 -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM default _RAMBASE=0x00100000 ## @@ -133,10 +133,10 @@ default _RESET=0xfffffffc ## Exception vectors default _EXCEPTION_VECTORS=_ROMBASE+0x100 -## linuxBIOS ROM start address +## coreboot ROM start address default _ROMSTART=0xfff03000 -## linuxBIOS C code runs at this location in RAM +## coreboot C code runs at this location in RAM default _RAMBASE=0x00100000 ### End Options.lb diff --git a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg index 568efb8f6b..305245d751 100755 --- a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg +++ b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg @@ -62,7 +62,7 @@ SIO 2002 9600 ;TCP port for serial IO [HOST] IP 10.0.1.2 FORMAT ELF -FILE linuxbios.elf +FILE coreboot.elf ;START 0x200000 LOAD MANUAL ;load code MANUAL or AUTO after reset DEBUGPORT 2001 diff --git a/src/mainboard/emulation/qemu-i386/Config.lb b/src/mainboard/emulation/qemu-i386/Config.lb index 72253f7763..b2a009d2e5 100644 --- a/src/mainboard/emulation/qemu-i386/Config.lb +++ b/src/mainboard/emulation/qemu-i386/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## default ROM_SIZE = 256 * 1024 default ROM_SECTION_SIZE = ROM_SIZE @@ -8,18 +8,18 @@ default ROM_SECTION_OFFSET = 0 ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -66,7 +66,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -74,7 +74,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds diff --git a/src/mainboard/emulation/qemu-i386/Options.lb b/src/mainboard/emulation/qemu-i386/Options.lb index 62a8ddd8d2..74e543f737 100644 --- a/src/mainboard/emulation/qemu-i386/Options.lb +++ b/src/mainboard/emulation/qemu-i386/Options.lb @@ -14,7 +14,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -63,7 +63,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -80,10 +80,10 @@ default IRQ_SLOT_COUNT=5 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/emulation/qemu-i386/mainboard.c b/src/mainboard/emulation/qemu-i386/mainboard.c index 0562799f16..cfbc0b2246 100644 --- a/src/mainboard/emulation/qemu-i386/mainboard.c +++ b/src/mainboard/emulation/qemu-i386/mainboard.c @@ -10,7 +10,7 @@ void vga_enable_console(); static void vga_init(device_t dev) { - /* code to make vga init run in real mode - does work but against the current Linuxbios philosophy */ + /* code to make vga init run in real mode - does work but against the current coreboot philosophy */ printk_debug("INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); printk_debug("DO THE VGA BIOS\n"); diff --git a/src/mainboard/emulation/qemu-i386/vgabios.c b/src/mainboard/emulation/qemu-i386/vgabios.c index 072cb7f21c..7f42f0ab12 100644 --- a/src/mainboard/emulation/qemu-i386/vgabios.c +++ b/src/mainboard/emulation/qemu-i386/vgabios.c @@ -64,7 +64,7 @@ *--------------------------------------------------------------------*/ /* Modified to be a self sufficient plug in so that it can be used - without reliance on other parts of core Linuxbios + without reliance on other parts of core coreboot (C) 2005 Nick.Barker9@btinternet.com Used initially for epia-m where there are problems getting the bios @@ -398,10 +398,10 @@ struct realidt { // that simplifies a lot of things ... // we'll just push all the registers on the stack as longwords, // and pop to protected mode. -// second, since this only ever runs as part of linuxbios, +// second, since this only ever runs as part of coreboot, // we know all the segment register values -- so we don't save any. // keep the handler that calls things small. It can do a call to -// more complex code in linuxbios itself. This helps a lot as we don't +// more complex code in coreboot itself. This helps a lot as we don't // have to do address fixup in this little stub, and calls are absolute // so the handler is relocatable. void handler(void) diff --git a/src/mainboard/gigabyte/ga-6bxc/Options.lb b/src/mainboard/gigabyte/ga-6bxc/Options.lb index df13ee490b..ce083410e4 100644 --- a/src/mainboard/gigabyte/ga-6bxc/Options.lb +++ b/src/mainboard/gigabyte/ga-6bxc/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb index 6e17d29d30..d58363adaf 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Config.lb +++ b/src/mainboard/gigabyte/ga_2761gxdk/Config.lb @@ -23,7 +23,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -40,18 +40,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -113,7 +113,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -141,7 +141,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -190,7 +190,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb index cde543e1ad..d91f2d1e80 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/Options.lb +++ b/src/mainboard/gigabyte/ga_2761gxdk/Options.lb @@ -64,7 +64,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -148,7 +148,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -173,7 +173,7 @@ default HAVE_ACPI_TABLES=0 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -259,10 +259,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1039 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -281,7 +281,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -333,7 +333,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb index 0f27a7ab44..93a012fb75 100644 --- a/src/mainboard/gigabyte/m57sli/Config.lb +++ b/src/mainboard/gigabyte/m57sli/Config.lb @@ -21,7 +21,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -38,18 +38,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -111,7 +111,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -139,7 +139,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -188,7 +188,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb index 91d08f04c5..149bbde94c 100644 --- a/src/mainboard/gigabyte/m57sli/Options.lb +++ b/src/mainboard/gigabyte/m57sli/Options.lb @@ -62,7 +62,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -146,7 +146,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -171,7 +171,7 @@ default HAVE_ACPI_TABLES=0 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -257,10 +257,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -279,7 +279,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -331,7 +331,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/ibm/e325/Config.lb b/src/mainboard/ibm/e325/Config.lb index 35d2273aea..a63f1f684e 100644 --- a/src/mainboard/ibm/e325/Config.lb +++ b/src/mainboard/ibm/e325/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -92,7 +92,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -112,7 +112,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index f8c4344645..21fc57a453 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -32,7 +32,7 @@ uses LB_CKS_LOC uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -71,7 +71,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -93,7 +93,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -129,10 +129,10 @@ default MAINBOARD_VENDOR="IBM" #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -151,7 +151,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -195,7 +195,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb index 49a802bee7..9407ab51c5 100644 --- a/src/mainboard/ibm/e326/Config.lb +++ b/src/mainboard/ibm/e326/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -92,7 +92,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -112,7 +112,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index d2e5cf488f..40db181ab5 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -32,7 +32,7 @@ uses LB_CKS_LOC uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -73,7 +73,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -95,7 +95,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -135,10 +135,10 @@ default MAINBOARD_VENDOR="IBM" #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -157,7 +157,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -201,7 +201,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/iei/juki-511p/Config.lb b/src/mainboard/iei/juki-511p/Config.lb index 53b1982fd1..aac495186d 100644 --- a/src/mainboard/iei/juki-511p/Config.lb +++ b/src/mainboard/iei/juki-511p/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## default ROM_SIZE = 256 * 1024 default ROM_SECTION_SIZE = ROM_SIZE @@ -8,18 +8,18 @@ default ROM_SECTION_OFFSET = 0 ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -66,7 +66,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -74,7 +74,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds diff --git a/src/mainboard/iei/juki-511p/Options.lb b/src/mainboard/iei/juki-511p/Options.lb index e2185a2604..cd5be9cad3 100644 --- a/src/mainboard/iei/juki-511p/Options.lb +++ b/src/mainboard/iei/juki-511p/Options.lb @@ -15,7 +15,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -62,7 +62,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -80,10 +80,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/iei/nova4899r/Config.lb b/src/mainboard/iei/nova4899r/Config.lb index 121e468bd2..3b4094a25f 100644 --- a/src/mainboard/iei/nova4899r/Config.lb +++ b/src/mainboard/iei/nova4899r/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iei/nova4899r/Options.lb b/src/mainboard/iei/nova4899r/Options.lb index 771a40b379..778cf737fc 100644 --- a/src/mainboard/iei/nova4899r/Options.lb +++ b/src/mainboard/iei/nova4899r/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -68,7 +68,7 @@ default HAVE_FALLBACK_BOOT=0 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -90,10 +90,10 @@ default IRQ_SLOT_COUNT=7 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -149,7 +149,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/intel/jarrell/Config.lb b/src/mainboard/intel/jarrell/Config.lb index 5cea22a5c7..5f0e697232 100644 --- a/src/mainboard/intel/jarrell/Config.lb +++ b/src/mainboard/intel/jarrell/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/intel/jarrell/Options.lb b/src/mainboard/intel/jarrell/Options.lb index abc11a5013..0bd5636c5a 100644 --- a/src/mainboard/intel/jarrell/Options.lb +++ b/src/mainboard/intel/jarrell/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -88,7 +88,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -110,7 +110,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -139,10 +139,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1079 #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3437 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -158,12 +158,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -213,7 +213,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb index f03b9c4015..52efe0f326 100644 --- a/src/mainboard/intel/xe7501devkit/Config.lb +++ b/src/mainboard/intel/xe7501devkit/Config.lb @@ -2,7 +2,7 @@ ## BEGIN BOILERPLATE - DO NOT EDIT ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus payload) will live in the boot rom chip. +## (coreboot plus payload) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE # The fallback image uses FALLBACK_SIZE bytes at the end of the ROM @@ -11,7 +11,7 @@ if USE_FALLBACK_IMAGE default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) else -# The normal image goes at the beginning of the LinuxBIOS ROM region +# The normal image goes at the beginning of the coreboot ROM region # and uses all the remaining space default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) @@ -19,12 +19,12 @@ else end ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -81,7 +81,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -89,7 +89,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FALLBACK_BOOT if USE_FALLBACK_IMAGE @@ -114,7 +114,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index 0595fe28e5..2f5a71d04c 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -55,7 +55,7 @@ uses USE_FALLBACK_IMAGE uses ROM_SIZE uses ROM_IMAGE_SIZE uses FALLBACK_SIZE -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION ## These are defined in mainboard Config.lb, don't add here uses ROM_SECTION_SIZE @@ -143,7 +143,7 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480 ### -### LinuxBIOS layout values +### coreboot layout values ### ## @@ -162,7 +162,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = 0 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -211,7 +211,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/intel/xe7501devkit/bus.h b/src/mainboard/intel/xe7501devkit/bus.h index 84661ddb36..2378ceaea0 100644 --- a/src/mainboard/intel/xe7501devkit/bus.h +++ b/src/mainboard/intel/xe7501devkit/bus.h @@ -1,7 +1,7 @@ #ifndef XE7501DEVKIT_BUS_H_INCLUDED #define XE7501DEVKIT_BUS_H_INCLUDED -// These were determined by seeing how LinuxBIOS enumerates the various +// These were determined by seeing how coreboot enumerates the various // PCI (and PCI-like) buses on the board. #define PCI_BUS_CHIPSET 0 diff --git a/src/mainboard/intel/xe7501devkit/ioapic.h b/src/mainboard/intel/xe7501devkit/ioapic.h index 642c04519f..30ae8e7a73 100644 --- a/src/mainboard/intel/xe7501devkit/ioapic.h +++ b/src/mainboard/intel/xe7501devkit/ioapic.h @@ -1,4 +1,4 @@ -// IOAPIC addresses determined by LinuxBIOS enumeration. +// IOAPIC addresses determined by coreboot enumeration. // Someday add functions to get APIC IDs and versions from the chips themselves. #define IOAPIC_ICH3 2 diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb index 31f3236d51..99ad24b981 100644 --- a/src/mainboard/iwill/dk8_htx/Config.lb +++ b/src/mainboard/iwill/dk8_htx/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -162,7 +162,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT @@ -189,7 +189,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -223,7 +223,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb index 713c8ad54d..6d8eab4d0c 100644 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ b/src/mainboard/iwill/dk8_htx/Options.lb @@ -40,7 +40,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -122,7 +122,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -149,7 +149,7 @@ default ACPI_SSDTX_NUM=3 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -236,10 +236,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -258,7 +258,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -308,7 +308,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/iwill/dk8s2/Config.lb b/src/mainboard/iwill/dk8s2/Config.lb index 59312df508..4cb18e5757 100644 --- a/src/mainboard/iwill/dk8s2/Config.lb +++ b/src/mainboard/iwill/dk8s2/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -95,7 +95,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -115,7 +115,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -145,7 +145,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8s2/Options.lb b/src/mainboard/iwill/dk8s2/Options.lb index 10e89d88b4..81aa84ef7e 100644 --- a/src/mainboard/iwill/dk8s2/Options.lb +++ b/src/mainboard/iwill/dk8s2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -72,7 +72,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -94,7 +94,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -131,10 +131,10 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -153,7 +153,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -202,7 +202,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/iwill/dk8x/Config.lb b/src/mainboard/iwill/dk8x/Config.lb index 30f7c3ce50..6eece3e320 100644 --- a/src/mainboard/iwill/dk8x/Config.lb +++ b/src/mainboard/iwill/dk8x/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -92,7 +92,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -112,7 +112,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/iwill/dk8x/Options.lb b/src/mainboard/iwill/dk8x/Options.lb index 4c982f2242..1811aa44c5 100644 --- a/src/mainboard/iwill/dk8x/Options.lb +++ b/src/mainboard/iwill/dk8x/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -72,7 +72,7 @@ default FALLBACK_SIZE=131072 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -94,7 +94,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -130,10 +130,10 @@ default CONFIG_USE_INIT=0 #default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -152,7 +152,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -201,7 +201,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/lippert/frontrunner/Config.lb b/src/mainboard/lippert/frontrunner/Config.lb index 3e3c521123..fc1f601951 100644 --- a/src/mainboard/lippert/frontrunner/Config.lb +++ b/src/mainboard/lippert/frontrunner/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/lippert/frontrunner/Options.lb b/src/mainboard/lippert/frontrunner/Options.lb index 0d44ee1864..e929289261 100644 --- a/src/mainboard/lippert/frontrunner/Options.lb +++ b/src/mainboard/lippert/frontrunner/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -60,7 +60,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -82,10 +82,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -141,7 +141,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/motorola/sandpoint/Config.lb b/src/mainboard/motorola/sandpoint/Config.lb index 7d42aa516c..ee6abf85fd 100644 --- a/src/mainboard/motorola/sandpoint/Config.lb +++ b/src/mainboard/motorola/sandpoint/Config.lb @@ -26,5 +26,5 @@ arch ppc end dir nvram dir flash -addaction linuxbios.a "$(CROSS_COMPILE)ranlib linuxbios.a" +addaction coreboot.a "$(CROSS_COMPILE)ranlib coreboot.a" makedefine CFLAGS += -g diff --git a/src/mainboard/motorola/sandpoint/Options.lb b/src/mainboard/motorola/sandpoint/Options.lb index b98ddb7ed3..85bd19bf5b 100644 --- a/src/mainboard/motorola/sandpoint/Options.lb +++ b/src/mainboard/motorola/sandpoint/Options.lb @@ -42,7 +42,7 @@ uses HEAP_SIZE uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -89,7 +89,7 @@ default CONFIG_FS_ISO9660=1 default CONFIG_FS_FAT=1 default AUTOBOOT_CMDLINE="hdc1:/vmlinuz" -# LinuxBIOS must fit into 128KB +# coreboot must fit into 128KB default ROM_IMAGE_SIZE=131072 default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE} default PAYLOAD_SIZE=262144 @@ -108,11 +108,11 @@ default _RESET=_ROMBASE+0x100 ## Exception vectors (other than reset vector) default _EXCEPTION_VECTORS=_RESET+0x100 -## Start of linuxBIOS in the boot rom +## Start of coreboot in the boot rom ## = _RESET + exeception vector table size default _ROMSTART=_RESET+0x3100 -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM default _RAMBASE=0x00100000 default _RAMSTART=0x00100000 diff --git a/src/mainboard/motorola/sandpoint/sp7410.cfg b/src/mainboard/motorola/sandpoint/sp7410.cfg index b5b8391ec8..95b96a5f0c 100644 --- a/src/mainboard/motorola/sandpoint/sp7410.cfg +++ b/src/mainboard/motorola/sandpoint/sp7410.cfg @@ -99,7 +99,7 @@ SIO 2002 9600 [HOST] IP 10.0.1.11 ;FILE E:\cygnus\root\usr\demo\sp7400\vxworks -FILE linuxbios.elf +FILE coreboot.elf FORMAT ELF ;START 0x403104 LOAD MANUAL ;load code MANUAL or AUTO after reset @@ -114,7 +114,7 @@ CHIPTYPE AM29BX8 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX CHIPSIZE 0x100000 ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000) BUSWIDTH 8 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64) WORKSPACE 0x00000000 ;workspace in SDRAM -FILE linuxbios.elf +FILE coreboot.elf FORMAT ELF ERASE 0xFFF00000 ;erase sector 0 of flash ERASE 0xFFF04000 ;erase sector 1 of flash diff --git a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb index 80789df46b..5fcdcce805 100644 --- a/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb +++ b/src/mainboard/motorola/sandpointx3_altimus_mpc7410/Options.lb @@ -39,7 +39,7 @@ uses HEAP_SIZE uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -86,7 +86,7 @@ default CONFIG_FS_ISO9660=1 default CONFIG_FS_FAT=1 default AUTOBOOT_CMDLINE="hdc1:/vmlinuz" -# LinuxBIOS must fit into 128KB +# coreboot must fit into 128KB default ROM_IMAGE_SIZE=131072 default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE} default PAYLOAD_SIZE=262144 @@ -105,11 +105,11 @@ default _RESET=_ROMBASE+0x100 ## Exception vectors (other than reset vector) default _EXCEPTION_VECTORS=_RESET+0x100 -## Start of linuxBIOS in the boot rom +## Start of coreboot in the boot rom ## = _RESET + exeception vector table size default _ROMSTART=_RESET+0x3100 -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM default _RAMBASE=0x00100000 default _RAMSTART=0x00100000 diff --git a/src/mainboard/msi/ms6178/Options.lb b/src/mainboard/msi/ms6178/Options.lb index 72930615f6..85a659ba0a 100644 --- a/src/mainboard/msi/ms6178/Options.lb +++ b/src/mainboard/msi/ms6178/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/msi/ms7260/Options.lb b/src/mainboard/msi/ms7260/Options.lb index be426f3231..05473c97cf 100644 --- a/src/mainboard/msi/ms7260/Options.lb +++ b/src/mainboard/msi/ms7260/Options.lb @@ -59,7 +59,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -121,7 +121,7 @@ default APIC_ID_OFFSET = 0x10 default LIFT_BSP_APIC_ID = 1 default CONFIG_CHIP_NAME = 1 -# Move the default LinuxBIOS CMOS range off of AMD RTC registers. +# Move the default coreboot CMOS range off of AMD RTC registers. default LB_CKS_RANGE_START = 49 default LB_CKS_RANGE_END = 122 default LB_CKS_LOC = 123 diff --git a/src/mainboard/msi/ms9185/Config.lb b/src/mainboard/msi/ms9185/Config.lb index 445224a40e..856237fd55 100644 --- a/src/mainboard/msi/ms9185/Config.lb +++ b/src/mainboard/msi/ms9185/Config.lb @@ -24,7 +24,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -36,18 +36,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -98,7 +98,7 @@ if USE_DCACHE_RAM end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE @@ -118,7 +118,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/msi/ms9185/Options.lb b/src/mainboard/msi/ms9185/Options.lb index 3229be329d..d42fb1515c 100644 --- a/src/mainboard/msi/ms9185/Options.lb +++ b/src/mainboard/msi/ms9185/Options.lb @@ -61,7 +61,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -131,7 +131,7 @@ default CONFIG_LB_MEM_TOPK=2048 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -158,7 +158,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -238,10 +238,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -260,7 +260,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -309,7 +309,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/msi/ms9282/Config.lb b/src/mainboard/msi/ms9282/Config.lb index 05ef85795a..7c3a4e7ae9 100644 --- a/src/mainboard/msi/ms9282/Config.lb +++ b/src/mainboard/msi/ms9282/Config.lb @@ -24,7 +24,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -36,19 +36,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -122,7 +122,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -142,7 +142,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -180,7 +180,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/msi/ms9282/Options.lb b/src/mainboard/msi/ms9282/Options.lb index 9e4b94d704..bef1e01f8c 100644 --- a/src/mainboard/msi/ms9282/Options.lb +++ b/src/mainboard/msi/ms9282/Options.lb @@ -57,7 +57,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -125,7 +125,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -147,7 +147,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -218,10 +218,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x9282 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -240,7 +240,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -289,7 +289,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index 21e5b44a52..dd67de6a09 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -93,7 +93,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -113,7 +113,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -142,7 +142,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index f68f8a8bb5..0f5b3e7776 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -82,7 +82,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -104,7 +104,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -152,10 +152,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x17c2 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x0010 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -174,7 +174,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -223,7 +223,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb index 4dcf75d774..34e2ae1725 100644 --- a/src/mainboard/nvidia/l1_2pvv/Config.lb +++ b/src/mainboard/nvidia/l1_2pvv/Config.lb @@ -21,7 +21,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -38,18 +38,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -142,7 +142,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -170,7 +170,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -219,7 +219,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb index 050e272560..7830dc7104 100644 --- a/src/mainboard/nvidia/l1_2pvv/Options.lb +++ b/src/mainboard/nvidia/l1_2pvv/Options.lb @@ -62,7 +62,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -146,7 +146,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -171,7 +171,7 @@ default HAVE_ACPI_TABLES=0 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -257,10 +257,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -279,7 +279,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -331,7 +331,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb index a0add90240..889bee52cb 100644 --- a/src/mainboard/olpc/btest/Config.lb +++ b/src/mainboard/olpc/btest/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb index 7d27ddc369..096a0ca6a7 100644 --- a/src/mainboard/olpc/btest/Options.lb +++ b/src/mainboard/olpc/btest/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -61,7 +61,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -83,10 +83,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -142,7 +142,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb index a0add90240..889bee52cb 100644 --- a/src/mainboard/olpc/rev_a/Config.lb +++ b/src/mainboard/olpc/rev_a/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -70,7 +70,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb index 7d27ddc369..096a0ca6a7 100644 --- a/src/mainboard/olpc/rev_a/Options.lb +++ b/src/mainboard/olpc/rev_a/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -61,7 +61,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -83,10 +83,10 @@ default IRQ_SLOT_COUNT=2 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -142,7 +142,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/pcengines/alix1c/Config.lb b/src/mainboard/pcengines/alix1c/Config.lb index 8c49d08f12..75e240af2f 100644 --- a/src/mainboard/pcengines/alix1c/Config.lb +++ b/src/mainboard/pcengines/alix1c/Config.lb @@ -20,7 +20,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -32,18 +32,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -81,7 +81,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -89,7 +89,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -109,7 +109,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/pcengines/alix1c/Options.lb b/src/mainboard/pcengines/alix1c/Options.lb index ec73294a5d..3e5c0456cc 100644 --- a/src/mainboard/pcengines/alix1c/Options.lb +++ b/src/mainboard/pcengines/alix1c/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -90,7 +90,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -111,10 +111,10 @@ default IRQ_SLOT_COUNT=5 default HAVE_OPTION_TABLE=0 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 @@ -177,7 +177,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c index b4cd555fb4..a05e50a4d8 100644 --- a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c +++ b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c @@ -189,7 +189,7 @@ void cache_as_ram_main(void) * etc. The stack might be used to return etc. That means we * care about what is in the stack. If we are smart we set * the CAR stack to the same location as the rest of - * LinuxBIOS. If that is the case we can just do a wbinvd. + * coreboot. If that is the case we can just do a wbinvd. * The stack will be written into real RAM that is now setup * and we continue like nothing happened. If the stack is * located somewhere other than where LB would like it, you diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb index 82de7c3e1c..22c13e406e 100644 --- a/src/mainboard/sunw/ultra40/Config.lb +++ b/src/mainboard/sunw/ultra40/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -111,7 +111,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -151,7 +151,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb index 7e62ae6aae..3c15841cf9 100644 --- a/src/mainboard/sunw/ultra40/Options.lb +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -95,7 +95,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -117,7 +117,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -185,10 +185,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x108e default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x40 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -207,7 +207,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -256,7 +256,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb index 944e758735..4df0cc0547 100644 --- a/src/mainboard/supermicro/h8dmr/Config.lb +++ b/src/mainboard/supermicro/h8dmr/Config.lb @@ -21,7 +21,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -38,18 +38,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -111,7 +111,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -139,7 +139,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -188,7 +188,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb index aedf1d0c11..a1104129a3 100644 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ b/src/mainboard/supermicro/h8dmr/Options.lb @@ -62,7 +62,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -145,7 +145,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -170,7 +170,7 @@ default HAVE_ACPI_TABLES=0 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -254,10 +254,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -276,7 +276,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -328,7 +328,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb index fe04f33b86..668824f079 100644 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ b/src/mainboard/supermicro/x6dai_g/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS, +## Compute a range of ROM that can be cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index e40875a182..727f4dc4ab 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6780 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb index 2ba628f574..366a061168 100644 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of LinuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS. +## Compute a range of ROM that can be cached to speed up coreboot. ## execution speed. ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE @@ -74,7 +74,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -82,7 +82,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -102,7 +102,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index ebfe983951..e5c55bad58 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb index 02999838eb..748cfde55c 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of LinuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS. +## Compute a range of ROM that can be cached to speed up coreboot. ## execution speed. ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE @@ -74,7 +74,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -82,7 +82,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -102,7 +102,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index ebfe983951..e5c55bad58 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb index 31425bfaa5..abd07e71a8 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index d92a8fd0a3..369cbe542d 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb index 11df62618a..ad9b6d04e6 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index d92a8fd0a3..369cbe542d 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/technologic/ts5300/Config.lb b/src/mainboard/technologic/ts5300/Config.lb index 82ccec988b..95dc2541e9 100644 --- a/src/mainboard/technologic/ts5300/Config.lb +++ b/src/mainboard/technologic/ts5300/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## default ROM_SIZE = 128 * 1024 default FALLBACK_SIZE = 0x10000 @@ -14,18 +14,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -71,7 +71,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -79,7 +79,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -99,7 +99,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/technologic/ts5300/Options.lb b/src/mainboard/technologic/ts5300/Options.lb index b1a74dde44..7334b8b7a6 100644 --- a/src/mainboard/technologic/ts5300/Options.lb +++ b/src/mainboard/technologic/ts5300/Options.lb @@ -12,7 +12,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -86,7 +86,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -103,10 +103,10 @@ default IRQ_SLOT_COUNT=7 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/totalimpact/briq/Config.lb b/src/mainboard/totalimpact/briq/Config.lb index ba91f2dfcb..968471c553 100644 --- a/src/mainboard/totalimpact/briq/Config.lb +++ b/src/mainboard/totalimpact/briq/Config.lb @@ -46,4 +46,4 @@ end ## Build the objects we have code for in this directory. ## -addaction linuxbios.a "$(CROSS_COMPILE)ranlib linuxbios.a" +addaction coreboot.a "$(CROSS_COMPILE)ranlib coreboot.a" diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb index a9396d8d45..f3a08afd6b 100644 --- a/src/mainboard/totalimpact/briq/Options.lb +++ b/src/mainboard/totalimpact/briq/Options.lb @@ -39,7 +39,7 @@ uses CONFIG_SYS_CLK_FREQ uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CROSS_COMPILE uses CC uses HOSTCC @@ -108,11 +108,11 @@ default _RESET=_ROMBASE+0x100 ## Exception vectors (other than reset vector) default _EXCEPTION_VECTORS=_RESET+0x100 -## Start of linuxBIOS in the boot rom +## Start of coreboot in the boot rom ## = _RESET + exeception vector table size default _ROMSTART=_RESET+0x3100 -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM default _RAMBASE=0x00100000 default _RAMSTART=0x00100000 diff --git a/src/mainboard/totalimpact/briq/briQ7400.cfg b/src/mainboard/totalimpact/briq/briQ7400.cfg index 20a438703e..22c64f7c77 100644 --- a/src/mainboard/totalimpact/briq/briQ7400.cfg +++ b/src/mainboard/totalimpact/briq/briQ7400.cfg @@ -148,7 +148,7 @@ CHIPTYPE AM29F ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16 CHIPSIZE 0x100000 ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000) BUSWIDTH 8 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64) ;WORKSPACE 0x00000000 ;workspace in SDRAM -FILE linuxbios.rom +FILE coreboot.rom FORMAT ELF ERASE 0xFFF00000 ;erase sector 0 of flash ERASE 0xFFF10000 ;erase sector 1 of flash diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb index 340325f42d..b0fa5250d2 100644 --- a/src/mainboard/tyan/s1846/Options.lb +++ b/src/mainboard/tyan/s1846/Options.lb @@ -30,7 +30,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index 46f1b3821f..2506906222 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -107,7 +107,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -137,7 +137,7 @@ mainboardinit cpu/x86/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index e151c7ed92..447b5513ea 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -36,7 +36,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -87,7 +87,7 @@ default FALLBACK_SIZE=131072 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -114,7 +114,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -162,10 +162,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -184,7 +184,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -233,7 +233,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2735/cache_as_ram_auto.c b/src/mainboard/tyan/s2735/cache_as_ram_auto.c index 80af842f4f..797ff62b80 100644 --- a/src/mainboard/tyan/s2735/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2735/cache_as_ram_auto.c @@ -259,7 +259,7 @@ cpu_reset_x: print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); #endif - /*copy and execute linuxbios_ram */ + /*copy and execute coreboot_ram */ copy_and_run(new_cpu_reset); /* We will not return */ } diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index e6ca2c304b..3c0c7d2d96 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index d3f95014f3..cf1298e9c8 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -83,7 +83,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -105,7 +105,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -153,10 +153,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -175,7 +175,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -224,7 +224,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index 4f1c6e4658..74a71f15a1 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 189ca08b7d..b90d4184e2 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -84,7 +84,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -106,7 +106,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -154,10 +154,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -176,7 +176,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -225,7 +225,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index bd4289ff56..1bc7726788 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index d0efa27fa4..72c40d9466 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -83,7 +83,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -105,7 +105,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -153,10 +153,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -175,7 +175,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -224,7 +224,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 05ff5c7234..e1c42de929 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index 49599aeeef..edefbbe95e 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -88,7 +88,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -110,7 +110,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -170,10 +170,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -192,7 +192,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -241,7 +241,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index 10363604ae..d883177fcc 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 1fb5694559..23b2658ed6 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -83,7 +83,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -105,7 +105,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -153,10 +153,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -175,7 +175,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -224,7 +224,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 795485df6d..a6c0449290 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -90,7 +90,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -110,7 +110,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -140,7 +140,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 4d339d7e93..254483d3ad 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -94,7 +94,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -116,7 +116,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -180,10 +180,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -202,7 +202,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -251,7 +251,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 9c14f7d3ad..840d2703a6 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -98,7 +98,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -119,7 +119,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -157,7 +157,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 484c84ecbe..8513e049fb 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -101,7 +101,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -123,7 +123,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -189,10 +189,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -211,7 +211,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -260,7 +260,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 0c3e2ae8a4..14b320075d 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -98,7 +98,7 @@ end end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -118,7 +118,7 @@ if USE_DCACHE_RAM end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -156,7 +156,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 8646e0a04b..9dbaf9dd31 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -94,7 +94,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -116,7 +116,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -176,10 +176,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -198,7 +198,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -247,7 +247,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index f24b07d5cb..f43ad82c4b 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -102,7 +102,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -130,7 +130,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -185,7 +185,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index c27999a383..84922a399a 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -38,7 +38,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -106,7 +106,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -128,7 +128,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -197,10 +197,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -219,7 +219,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -268,7 +268,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb index 6cb3491c0b..a92478a805 100644 --- a/src/mainboard/tyan/s2912/Config.lb +++ b/src/mainboard/tyan/s2912/Config.lb @@ -21,7 +21,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -38,18 +38,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -112,7 +112,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -140,7 +140,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -189,7 +189,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 09b647e00b..3326cdb15b 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -62,7 +62,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -146,7 +146,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -173,7 +173,7 @@ default ACPI_SSDTX_NUM=3 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -259,10 +259,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -281,7 +281,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -333,7 +333,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index df44242896..c529a8a3c3 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -100,7 +100,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -121,7 +121,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -152,7 +152,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 7afffb2c59..7024d629f4 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -87,7 +87,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -109,7 +109,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -162,10 +162,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -184,7 +184,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -233,7 +233,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index d128842c28..041dbb9748 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,19 +12,19 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default CONFIG_ROM_PAYLOAD = 1 ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -100,7 +100,7 @@ else end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc @@ -121,7 +121,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -152,7 +152,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index 08444d46b7..d95b1e3e35 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -87,7 +87,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -109,7 +109,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -161,10 +161,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -183,7 +183,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00002000 @@ -232,7 +232,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/via/epia-m/Config.lb b/src/mainboard/via/epia-m/Config.lb index a3e4b41486..c8537e0425 100644 --- a/src/mainboard/via/epia-m/Config.lb +++ b/src/mainboard/via/epia-m/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -76,7 +76,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -84,7 +84,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -104,7 +104,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/via/epia-m/Options.lb b/src/mainboard/via/epia-m/Options.lb index 5c88e5f817..575cc5eeb3 100644 --- a/src/mainboard/via/epia-m/Options.lb +++ b/src/mainboard/via/epia-m/Options.lb @@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -71,7 +71,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -94,10 +94,10 @@ default HAVE_ACPI_TABLES=1 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 diff --git a/src/mainboard/via/epia-m/acpi_tables.c b/src/mainboard/via/epia-m/acpi_tables.c index 209434415b..fbe859d3d2 100644 --- a/src/mainboard/via/epia-m/acpi_tables.c +++ b/src/mainboard/via/epia-m/acpi_tables.c @@ -1,5 +1,5 @@ /* - * LinuxBIOS ACPI Table support + * coreboot ACPI Table support * written by Stefan Reinauer <stepan@openbios.org> * ACPI FADT, FACS, and DSDT table support added by * Nick Barker <nick.barker9@btinternet.com>, and those portions diff --git a/src/mainboard/via/epia-m/mainboard.c b/src/mainboard/via/epia-m/mainboard.c index d48330ff4b..8f2ee10f02 100644 --- a/src/mainboard/via/epia-m/mainboard.c +++ b/src/mainboard/via/epia-m/mainboard.c @@ -13,7 +13,7 @@ static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need // that - // - we need page 0 below for linuxbios tables. + // - we need page 0 below for coreboot tables. printk_debug("INSTALL REAL-MODE IDT\n"); setup_realmode_idt(); diff --git a/src/mainboard/via/epia-m/vgabios.c b/src/mainboard/via/epia-m/vgabios.c index 8565ba2236..6d588a7021 100644 --- a/src/mainboard/via/epia-m/vgabios.c +++ b/src/mainboard/via/epia-m/vgabios.c @@ -66,7 +66,7 @@ *--------------------------------------------------------------------*/ /* Modified to be a self sufficient plug in so that it can be used - without reliance on other parts of core Linuxbios + without reliance on other parts of core coreboot (C) 2005 Nick.Barker9@btinternet.com Used initially for epia-m where there are problems getting the bios @@ -399,10 +399,10 @@ struct realidt { // that simplifies a lot of things ... // we'll just push all the registers on the stack as longwords, // and pop to protected mode. -// second, since this only ever runs as part of linuxbios, +// second, since this only ever runs as part of coreboot, // we know all the segment register values -- so we don't save any. // keep the handler that calls things small. It can do a call to -// more complex code in linuxbios itself. This helps a lot as we don't +// more complex code in coreboot itself. This helps a lot as we don't // have to do address fixup in this little stub, and calls are absolute // so the handler is relocatable. void handler(void) diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb index 4dc9511990..9c354f7350 100644 --- a/src/mainboard/via/epia/Config.lb +++ b/src/mainboard/via/epia/Config.lb @@ -1,6 +1,6 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -12,18 +12,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -69,7 +69,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -77,7 +77,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -97,7 +97,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/via/epia/Options.lb b/src/mainboard/via/epia/Options.lb index 218f20d86a..d58be818b1 100644 --- a/src/mainboard/via/epia/Options.lb +++ b/src/mainboard/via/epia/Options.lb @@ -20,7 +20,7 @@ uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses ARCH uses FALLBACK_SIZE uses STACK_SIZE @@ -82,7 +82,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_MP_TABLE=0 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=0 @@ -107,10 +107,10 @@ default IRQ_SLOT_COUNT=5 default HAVE_OPTION_TABLE=1 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 |