summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/pit/mainboard.c71
1 files changed, 17 insertions, 54 deletions
diff --git a/src/mainboard/google/pit/mainboard.c b/src/mainboard/google/pit/mainboard.c
index 67d3b5d0ab..54ea042bd5 100644
--- a/src/mainboard/google/pit/mainboard.c
+++ b/src/mainboard/google/pit/mainboard.c
@@ -34,7 +34,9 @@
#include <cpu/samsung/exynos5420/power.h>
#include <cpu/samsung/exynos5420/i2c.h>
#include <cpu/samsung/exynos5420/dp-core.h>
+#include <drivers/parade/ps8625/ps8625.h>
#include <ec/google/chromeec/ec.h>
+#include <stdlib.h>
#include "exynos5420.h"
@@ -56,7 +58,7 @@ static enum exynos5_gpio_pin dp_hpd = GPIO_X26; /* active high */
static enum exynos5_gpio_pin bl_pwm = GPIO_B20; /* active high */
static enum exynos5_gpio_pin bl_en = GPIO_X22; /* active high */
-static void exynos_dp_bridge_setup(void)
+static void parade_dp_bridge_setup(void)
{
gpio_set_value(dp_pd_l, 1);
gpio_cfg_pin(dp_pd_l, GPIO_OUTPUT);
@@ -69,37 +71,19 @@ static void exynos_dp_bridge_setup(void)
gpio_set_value(dp_rst_l, 1);
gpio_cfg_pin(dp_hpd, GPIO_INPUT);
-}
-static void exynos_dp_bridge_init(void)
-{
- /* De-assert PD (and possibly RST) to power up the bridge */
+ /* De-assert PD (and possibly RST) to power up the bridge. */
gpio_set_value(dp_pd_l, 1);
gpio_set_value(dp_rst_l, 1);
- /*
- * We need to wait for 90ms after bringing up the bridge since
- * there is a phantom "high" on the HPD chip during its
- * bootup. The phantom high comes within 7ms of de-asserting
- * PD and persists for at least 15ms. The real high comes
- * roughly 50ms after PD is de-asserted. The phantom high
- * makes it hard for us to know when the NXP chip is up.
- */
- udelay(90000);
-}
+ /* Hang around for the bridge to come up. */
+ mdelay(40);
-static int exynos_dp_hotplug(void)
-{
- /* Check HPD. If it's high, we're all good. */
- return gpio_get_value(dp_hpd) ? 0 : 1;
-}
+ /* Configure the bridge chip. */
+ exynos_pinmux_i2c7();
+ i2c_init(7, 100000, 0x00);
-static void exynos_dp_reset(void)
-{
- gpio_set_value(dp_pd_l, 0);
- gpio_set_value(dp_rst_l, 0);
- /* paranoid delay period (300ms) */
- udelay(300 * 1000);
+ parade_ps8625_bridge_setup(7, 0x48);
}
/*
@@ -203,7 +187,6 @@ static void backlight_vdd(void)
/* this happens after cpu_init where exynos resources are set */
static void mainboard_init(device_t dev)
{
- int dp_tries;
struct s5p_dp_device dp_device = {
.base = (struct exynos5_dp *)EXYNOS5420_DP1_BASE,
.video_info = &dp_video_info,
@@ -225,34 +208,14 @@ static void mainboard_init(device_t dev)
lcd_vdd();
- // FIXME: should timeout
- do {
- udelay(50);
- } while (!exynos_dp_hotplug());
-
- exynos_dp_bridge_setup();
- for (dp_tries = 1; dp_tries <= MAX_DP_TRIES; dp_tries++) {
- exynos_dp_bridge_init();
- if (exynos_dp_hotplug()) {
- printk(BIOS_ERR, "Hotplug detect failed.\n");
- exynos_dp_reset();
- continue;
- }
-
- if (dp_controller_init(&dp_device))
- continue;
-
- udelay(LCD_T3_DELAY_MS * 1000);
-
- backlight_vdd();
- backlight_pwm();
- backlight_en();
- /* if we're here, we're successful */
- break;
- }
+ parade_dp_bridge_setup();
+ dp_controller_init(&dp_device);
+
+ udelay(LCD_T3_DELAY_MS * 1000);
- if (dp_tries > MAX_DP_TRIES)
- printk(BIOS_ERR, "%s: Failed to set up displayport\n", __func__);
+ backlight_vdd();
+ backlight_pwm();
+ backlight_en();
// Uncomment to get excessive GPIO output:
// gpio_info();