diff options
Diffstat (limited to 'src/mainboard')
33 files changed, 148 insertions, 148 deletions
diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c index 79d00189e8..e4a0313bd4 100644 --- a/src/mainboard/cubietech/cubieboard/bootblock.c +++ b/src/mainboard/cubietech/cubieboard/bootblock.c @@ -38,12 +38,12 @@ static void cubieboard_set_sys_clock(void) struct a10_ccm *ccm = (void *)A1X_CCM_BASE; /* Switch CPU clock to main oscillator */ - writel(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); + write32(&ccm->cpu_ahb_apb0_cfg, CPU_AHB_APB0_DEFAULT); /* Configure the PLL1. The value is the same one used by u-boot * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz */ - writel(0xa1005000, &ccm->pll1_cfg); + write32(&ccm->pll1_cfg, 0xa1005000); /* FIXME: Delay to wait for PLL to lock */ u32 wait = 1000; @@ -53,7 +53,7 @@ static void cubieboard_set_sys_clock(void) reg32 = read32(&ccm->cpu_ahb_apb0_cfg); reg32 &= ~CPU_CLK_SRC_MASK; reg32 |= CPU_CLK_SRC_PLL1; - writel(reg32, &ccm->cpu_ahb_apb0_cfg); + write32(&ccm->cpu_ahb_apb0_cfg, reg32); } static void cubieboard_setup_clocks(void) @@ -62,12 +62,12 @@ static void cubieboard_setup_clocks(void) cubieboard_set_sys_clock(); /* Configure the clock source for APB1. This drives our UART */ - writel(APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0), - &ccm->apb1_clk_div_cfg); + write32(&ccm->apb1_clk_div_cfg, + APB1_CLK_SRC_OSC24M | APB1_RAT_N(0) | APB1_RAT_M(0)); /* Configure the clock for SD0 */ - writel(SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1), - &ccm->sd0_clk_cfg); + write32(&ccm->sd0_clk_cfg, + SDx_CLK_GATE | SDx_CLK_SRC_OSC24M | SDx_RAT_EXP_N(0) | SDx_RAT_M(1)); /* Enable clock to SD0 */ a1x_periph_clock_enable(A1X_CLKEN_MMC0); diff --git a/src/mainboard/google/nyan/bootblock.c b/src/mainboard/google/nyan/bootblock.c index bc3cd3efa2..9e26e296f3 100644 --- a/src/mainboard/google/nyan/bootblock.c +++ b/src/mainboard/google/nyan/bootblock.c @@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; static void set_clock_sources(void) { /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ - writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta); + write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT); clock_configure_source(mselect, PLLP, 102000); diff --git a/src/mainboard/google/nyan/mainboard.c b/src/mainboard/google/nyan/mainboard.c index dce4cbcbd5..97ae227c2d 100644 --- a/src/mainboard/google/nyan/mainboard.c +++ b/src/mainboard/google/nyan/mainboard.c @@ -184,13 +184,13 @@ static void setup_kernel_info(void) // from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the // value defined in BCT. struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE; - writel(0x80080000, &pmc->odmdata); + write32(&pmc->odmdata, 0x80080000); // Not strictly info, but kernel graphics driver needs this region locked down struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE; - writel(0, &mc->video_protect_bom); - writel(0, &mc->video_protect_size_mb); - writel(1, &mc->video_protect_reg_ctrl); + write32(&mc->video_protect_bom, 0); + write32(&mc->video_protect_size_mb, 0); + write32(&mc->video_protect_reg_ctrl, 1); } static void setup_ec_spi(void) diff --git a/src/mainboard/google/nyan_big/bootblock.c b/src/mainboard/google/nyan_big/bootblock.c index c471cb841a..94943974d1 100644 --- a/src/mainboard/google/nyan_big/bootblock.c +++ b/src/mainboard/google/nyan_big/bootblock.c @@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; static void set_clock_sources(void) { /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ - writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta); + write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT); clock_configure_source(mselect, PLLP, 102000); diff --git a/src/mainboard/google/nyan_big/mainboard.c b/src/mainboard/google/nyan_big/mainboard.c index 712269a708..f899dab3fb 100644 --- a/src/mainboard/google/nyan_big/mainboard.c +++ b/src/mainboard/google/nyan_big/mainboard.c @@ -184,13 +184,13 @@ static void setup_kernel_info(void) // from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the // value defined in BCT. struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE; - writel(0x80080000, &pmc->odmdata); + write32(&pmc->odmdata, 0x80080000); // Not strictly info, but kernel graphics driver needs this region locked down struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE; - writel(0, &mc->video_protect_bom); - writel(0, &mc->video_protect_size_mb); - writel(1, &mc->video_protect_reg_ctrl); + write32(&mc->video_protect_bom, 0); + write32(&mc->video_protect_size_mb, 0); + write32(&mc->video_protect_reg_ctrl, 1); } static void setup_ec_spi(void) diff --git a/src/mainboard/google/nyan_blaze/bootblock.c b/src/mainboard/google/nyan_blaze/bootblock.c index c471cb841a..94943974d1 100644 --- a/src/mainboard/google/nyan_blaze/bootblock.c +++ b/src/mainboard/google/nyan_blaze/bootblock.c @@ -36,7 +36,7 @@ static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; static void set_clock_sources(void) { /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ - writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta); + write32(&clk_rst->clk_src_uarta, PLLP << CLK_SOURCE_SHIFT); clock_configure_source(mselect, PLLP, 102000); diff --git a/src/mainboard/google/nyan_blaze/mainboard.c b/src/mainboard/google/nyan_blaze/mainboard.c index 9daa2bb6b3..f5aa1393f1 100644 --- a/src/mainboard/google/nyan_blaze/mainboard.c +++ b/src/mainboard/google/nyan_blaze/mainboard.c @@ -184,13 +184,13 @@ static void setup_kernel_info(void) // from CONFIG_CONSOLE_SERIAL_UART[A-E]. Right now we simply copy the // value defined in BCT. struct tegra_pmc_regs *pmc = (void*)TEGRA_PMC_BASE; - writel(0x80080000, &pmc->odmdata); + write32(&pmc->odmdata, 0x80080000); // Not strictly info, but kernel graphics driver needs this region locked down struct tegra_mc_regs *mc = (void *)TEGRA_MC_BASE; - writel(0, &mc->video_protect_bom); - writel(0, &mc->video_protect_size_mb); - writel(1, &mc->video_protect_reg_ctrl); + write32(&mc->video_protect_bom, 0); + write32(&mc->video_protect_size_mb, 0); + write32(&mc->video_protect_reg_ctrl, 1); } static void setup_ec_spi(void) diff --git a/src/mainboard/google/peach_pit/mainboard.c b/src/mainboard/google/peach_pit/mainboard.c index fb37cde6d4..ff2ef86056 100644 --- a/src/mainboard/google/peach_pit/mainboard.c +++ b/src/mainboard/google/peach_pit/mainboard.c @@ -429,8 +429,8 @@ static void mainboard_init(device_t dev) * been found to come up as 3. This means FIMD SYSMMU is on by * default on Exynos5420. For now we are disabling FIMD SYSMMU. */ - writel(0x0, (void *)0x14640000); - writel(0x0, (void *)0x14680000); + write32((void *)0x14640000, 0x0); + write32((void *)0x14680000, 0x0); lcd_vdd(); diff --git a/src/mainboard/google/rush/bootblock.c b/src/mainboard/google/rush/bootblock.c index 2d099fb6c3..13d1f6726e 100644 --- a/src/mainboard/google/rush/bootblock.c +++ b/src/mainboard/google/rush/bootblock.c @@ -85,7 +85,7 @@ void bootblock_mainboard_early_init(void) static void set_clock_sources(void) { /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ - writel(PLLP << CLK_SOURCE_SHIFT, CLK_RST_REG(clk_src_uarta)); + write32(CLK_RST_REG(clk_src_uarta), PLLP << CLK_SOURCE_SHIFT); } void bootblock_mainboard_init(void) diff --git a/src/mainboard/google/rush_ryu/bootblock.c b/src/mainboard/google/rush_ryu/bootblock.c index 2272ce1370..232baafbc9 100644 --- a/src/mainboard/google/rush_ryu/bootblock.c +++ b/src/mainboard/google/rush_ryu/bootblock.c @@ -71,7 +71,7 @@ void bootblock_mainboard_early_init(void) static void set_clock_sources(void) { /* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */ - writel(PLLP << CLK_SOURCE_SHIFT, CLK_RST_REG(clk_src_uarta)); + write32(CLK_RST_REG(clk_src_uarta), PLLP << CLK_SOURCE_SHIFT); } static const struct pad_config padcfgs[] = { diff --git a/src/mainboard/google/storm/reset.c b/src/mainboard/google/storm/reset.c index 58c52f91d9..0bac9cc7dc 100644 --- a/src/mainboard/google/storm/reset.c +++ b/src/mainboard/google/storm/reset.c @@ -35,12 +35,12 @@ static void wdog_reset(void) { printk(BIOS_DEBUG, "\nResetting with watchdog!\n"); - writel(0, APCS_WDT0_EN); - writel(1, APCS_WDT0_RST); - writel(RESET_WDT_BARK_TIME, APCS_WDT0_BARK_TIME); - writel(RESET_WDT_BITE_TIME, APCS_WDT0_BITE_TIME); - writel(1, APCS_WDT0_EN); - writel(1, APCS_WDT0_CPU0_WDOG_EXPIRED_ENABLE); + write32(APCS_WDT0_EN, 0); + write32(APCS_WDT0_RST, 1); + write32(APCS_WDT0_BARK_TIME, RESET_WDT_BARK_TIME); + write32(APCS_WDT0_BITE_TIME, RESET_WDT_BITE_TIME); + write32(APCS_WDT0_EN, 1); + write32(APCS_WDT0_CPU0_WDOG_EXPIRED_ENABLE, 1); for (;;) ; diff --git a/src/mainboard/google/veyron_brain/bootblock.c b/src/mainboard/google/veyron_brain/bootblock.c index 68234c9609..678059f954 100644 --- a/src/mainboard/google/veyron_brain/bootblock.c +++ b/src/mainboard/google/veyron_brain/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -64,12 +64,12 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_brain/mainboard.c b/src/mainboard/google/veyron_brain/mainboard.c index 8e2bbb61e3..45873b68b3 100644 --- a/src/mainboard/google/veyron_brain/mainboard.c +++ b/src/mainboard/google/veyron_brain/mainboard.c @@ -50,34 +50,34 @@ static void configure_usb(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); rk808_configure_switch(2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */ rk808_configure_ldo(7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */ diff --git a/src/mainboard/google/veyron_brain/romstage.c b/src/mainboard/google/veyron_brain/romstage.c index 37efcaac6b..4156401cc0 100644 --- a/src/mainboard/google/veyron_brain/romstage.c +++ b/src/mainboard/google/veyron_brain/romstage.c @@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_danger/bootblock.c b/src/mainboard/google/veyron_danger/bootblock.c index 68234c9609..678059f954 100644 --- a/src/mainboard/google/veyron_danger/bootblock.c +++ b/src/mainboard/google/veyron_danger/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -64,12 +64,12 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_danger/mainboard.c b/src/mainboard/google/veyron_danger/mainboard.c index 8f01783157..b664d55804 100644 --- a/src/mainboard/google/veyron_danger/mainboard.c +++ b/src/mainboard/google/veyron_danger/mainboard.c @@ -50,10 +50,10 @@ static void configure_usb(void) static void configure_sdmmc(void) { - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); + write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0); /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); + write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12)); /* Note: these power rail definitions are copied in romstage.c */ rk808_configure_ldo(4, 3300); /* VCCIO_SD */ @@ -64,34 +64,34 @@ static void configure_sdmmc(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); rk808_configure_switch(2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */ rk808_configure_ldo(7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */ diff --git a/src/mainboard/google/veyron_danger/romstage.c b/src/mainboard/google/veyron_danger/romstage.c index f3883bd28f..9be13fe894 100644 --- a/src/mainboard/google/veyron_danger/romstage.c +++ b/src/mainboard/google/veyron_danger/romstage.c @@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_jerry/bootblock.c b/src/mainboard/google/veyron_jerry/bootblock.c index 19c2aec0db..985152bebc 100644 --- a/src/mainboard/google/veyron_jerry/bootblock.c +++ b/src/mainboard/google/veyron_jerry/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -62,16 +62,16 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); /* spi0 for chrome ec */ - writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0); + write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0); rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_jerry/mainboard.c b/src/mainboard/google/veyron_jerry/mainboard.c index 1fc823c5fe..6fb3a8f6ea 100644 --- a/src/mainboard/google/veyron_jerry/mainboard.c +++ b/src/mainboard/google/veyron_jerry/mainboard.c @@ -50,10 +50,10 @@ static void configure_usb(void) static void configure_sdmmc(void) { - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); + write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0); /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); + write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12)); /* Note: these power rail definitions are copied in romstage.c */ rk808_configure_ldo(4, 3300); /* VCCIO_SD */ @@ -64,34 +64,34 @@ static void configure_sdmmc(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); switch (board_id()) { case 2: @@ -107,7 +107,7 @@ static void configure_vop(void) /* enable edp HPD */ gpio_input_pulldown(GPIO(7, B, 3)); - writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug); + write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG); break; } } diff --git a/src/mainboard/google/veyron_jerry/romstage.c b/src/mainboard/google/veyron_jerry/romstage.c index 9d19586cd5..e8f54deedd 100644 --- a/src/mainboard/google/veyron_jerry/romstage.c +++ b/src/mainboard/google/veyron_jerry/romstage.c @@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_mighty/bootblock.c b/src/mainboard/google/veyron_mighty/bootblock.c index 19c2aec0db..985152bebc 100644 --- a/src/mainboard/google/veyron_mighty/bootblock.c +++ b/src/mainboard/google/veyron_mighty/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -62,16 +62,16 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); /* spi0 for chrome ec */ - writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0); + write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0); rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_mighty/mainboard.c b/src/mainboard/google/veyron_mighty/mainboard.c index fb1d8fa69e..5c417544ea 100644 --- a/src/mainboard/google/veyron_mighty/mainboard.c +++ b/src/mainboard/google/veyron_mighty/mainboard.c @@ -50,10 +50,10 @@ static void configure_usb(void) static void configure_sdmmc(void) { - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); + write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0); /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); + write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12)); /* Note: these power rail definitions are copied in romstage.c */ rk808_configure_ldo(4, 3300); /* VCCIO_SD */ @@ -64,34 +64,34 @@ static void configure_sdmmc(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); switch (board_id()) { case 0: @@ -107,7 +107,7 @@ static void configure_vop(void) /* enable edp HPD */ gpio_input_pulldown(GPIO(7, B, 3)); - writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug); + write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG); break; } } diff --git a/src/mainboard/google/veyron_mighty/romstage.c b/src/mainboard/google/veyron_mighty/romstage.c index 9d19586cd5..e8f54deedd 100644 --- a/src/mainboard/google/veyron_mighty/romstage.c +++ b/src/mainboard/google/veyron_mighty/romstage.c @@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_pinky/bootblock.c b/src/mainboard/google/veyron_pinky/bootblock.c index 19c2aec0db..985152bebc 100644 --- a/src/mainboard/google/veyron_pinky/bootblock.c +++ b/src/mainboard/google/veyron_pinky/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -62,16 +62,16 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); /* spi0 for chrome ec */ - writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0); + write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0); rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_pinky/mainboard.c b/src/mainboard/google/veyron_pinky/mainboard.c index e3e5b290a9..ef14c2d6b1 100644 --- a/src/mainboard/google/veyron_pinky/mainboard.c +++ b/src/mainboard/google/veyron_pinky/mainboard.c @@ -60,10 +60,10 @@ static void configure_usb(void) static void configure_sdmmc(void) { - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); + write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0); /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); + write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12)); /* Note: these power rail definitions are copied in romstage.c */ switch (board_id()) { @@ -82,9 +82,9 @@ static void configure_sdmmc(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); switch (board_id()) { case 0: @@ -104,11 +104,11 @@ static void configure_emmc(void) static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); switch (board_id()) { case 0: @@ -120,16 +120,16 @@ static void configure_codec(void) } /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); switch (board_id()) { case 0: @@ -151,7 +151,7 @@ static void configure_vop(void) /* enable edp HPD */ gpio_input_pulldown(GPIO(7, B, 3)); - writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug); + write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG); break; } } diff --git a/src/mainboard/google/veyron_pinky/romstage.c b/src/mainboard/google/veyron_pinky/romstage.c index 74c5ef3585..3e885647c7 100644 --- a/src/mainboard/google/veyron_pinky/romstage.c +++ b/src/mainboard/google/veyron_pinky/romstage.c @@ -48,7 +48,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_rialto/bootblock.c b/src/mainboard/google/veyron_rialto/bootblock.c index ab9d60dad0..135aece472 100644 --- a/src/mainboard/google/veyron_rialto/bootblock.c +++ b/src/mainboard/google/veyron_rialto/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -62,12 +62,12 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_rialto/mainboard.c b/src/mainboard/google/veyron_rialto/mainboard.c index d03a917c09..eb6efd3290 100644 --- a/src/mainboard/google/veyron_rialto/mainboard.c +++ b/src/mainboard/google/veyron_rialto/mainboard.c @@ -50,25 +50,25 @@ static void configure_usb(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } diff --git a/src/mainboard/google/veyron_rialto/romstage.c b/src/mainboard/google/veyron_rialto/romstage.c index f3883bd28f..9be13fe894 100644 --- a/src/mainboard/google/veyron_rialto/romstage.c +++ b/src/mainboard/google/veyron_rialto/romstage.c @@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/google/veyron_speedy/bootblock.c b/src/mainboard/google/veyron_speedy/bootblock.c index 19c2aec0db..985152bebc 100644 --- a/src/mainboard/google/veyron_speedy/bootblock.c +++ b/src/mainboard/google/veyron_speedy/bootblock.c @@ -38,7 +38,7 @@ void bootblock_mainboard_early_init() { if (IS_ENABLED(CONFIG_DRIVERS_UART)) { assert(CONFIG_CONSOLE_SERIAL_UART_ADDRESS == UART2_BASE); - writel(IOMUX_UART2, &rk3288_grf->iomux_uart2); + write32(&rk3288_grf->iomux_uart2, IOMUX_UART2); } } @@ -62,16 +62,16 @@ void bootblock_mainboard_init(void) rkclk_configure_cpu(); /* i2c1 for tpm */ - writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1); + write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1); i2c_init(1, 400*KHz); /* spi2 for firmware ROM */ - writel(IOMUX_SPI2_CSCLK, &rk3288_grf->iomux_spi2csclk); - writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); + write32(&rk3288_grf->iomux_spi2csclk, IOMUX_SPI2_CSCLK); + write32(&rk3288_grf->iomux_spi2txrx, IOMUX_SPI2_TXRX); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); /* spi0 for chrome ec */ - writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0); + write32(&rk3288_grf->iomux_spi0, IOMUX_SPI0); rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz); setup_chromeos_gpios(); diff --git a/src/mainboard/google/veyron_speedy/mainboard.c b/src/mainboard/google/veyron_speedy/mainboard.c index fb1d8fa69e..5c417544ea 100644 --- a/src/mainboard/google/veyron_speedy/mainboard.c +++ b/src/mainboard/google/veyron_speedy/mainboard.c @@ -50,10 +50,10 @@ static void configure_usb(void) static void configure_sdmmc(void) { - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); + write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0); /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); + write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12)); /* Note: these power rail definitions are copied in romstage.c */ rk808_configure_ldo(4, 3300); /* VCCIO_SD */ @@ -64,34 +64,34 @@ static void configure_sdmmc(void) static void configure_emmc(void) { - writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); - writel(IOMUX_EMMCPWREN, &rk3288_grf->iomux_emmcpwren); - writel(IOMUX_EMMCCMD, &rk3288_grf->iomux_emmccmd); + write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA); + write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN); + write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD); gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */ } static void configure_codec(void) { - writel(IOMUX_I2C2, &rk3288_grf->iomux_i2c2); /* CODEC I2C */ + write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */ i2c_init(2, 400*KHz); /* CODEC I2C */ - writel(IOMUX_I2S, &rk3288_grf->iomux_i2s); - writel(IOMUX_I2SCLK, &rk3288_grf->iomux_i2sclk); + write32(&rk3288_grf->iomux_i2s, IOMUX_I2S); + write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK); rk808_configure_ldo(6, 1800); /* VCC18_CODEC */ /* AUDIO IO domain 1.8V voltage selection */ - writel(RK_SETBITS(1 << 6), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6)); rkclk_configure_i2s(12288000); } static void configure_vop(void) { - writel(IOMUX_LCDC, &rk3288_grf->iomux_lcdc); + write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC); /* lcdc(vop) iodomain select 1.8V */ - writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); + write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0)); switch (board_id()) { case 0: @@ -107,7 +107,7 @@ static void configure_vop(void) /* enable edp HPD */ gpio_input_pulldown(GPIO(7, B, 3)); - writel(IOMUX_EDP_HOTPLUG, &rk3288_grf->iomux_edp_hotplug); + write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG); break; } } diff --git a/src/mainboard/google/veyron_speedy/romstage.c b/src/mainboard/google/veyron_speedy/romstage.c index f3883bd28f..9be13fe894 100644 --- a/src/mainboard/google/veyron_speedy/romstage.c +++ b/src/mainboard/google/veyron_speedy/romstage.c @@ -49,7 +49,7 @@ static void regulate_vdd_log(unsigned int mv) const u32 max_regulator_mv = 1350; /* 1.35V */ const u32 min_regulator_mv = 870; /* 0.87V */ - writel(IOMUX_PWM1, &rk3288_grf->iomux_pwm1); + write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); diff --git a/src/mainboard/ti/beaglebone/bootblock.c b/src/mainboard/ti/beaglebone/bootblock.c index 2b22227fb2..3144eddb27 100644 --- a/src/mainboard/ti/beaglebone/bootblock.c +++ b/src/mainboard/ti/beaglebone/bootblock.c @@ -29,7 +29,7 @@ void bootblock_mainboard_init(void) void *uart_clock_ctrl = NULL; /* Enable the GPIO module */ - writel((0x2 << 0) | (1 << 18), (uint32_t *)(0x44e00000 + 0xac)); + write32((uint32_t *)(0x44e00000 + 0xac), (0x2 << 0) | (1 << 18)); /* Disable interrupts from these GPIOs */ setbits_le32((uint32_t *)(0x4804c000 + 0x3c), 0xf << 21); @@ -62,7 +62,7 @@ void bootblock_mainboard_init(void) uart_clock_ctrl = (void *)(uintptr_t)(0x44e00000 + 0x38); } if (uart_clock_ctrl) - writel(0x2, uart_clock_ctrl); + write32(uart_clock_ctrl, 0x2); /* Start monotonic timer */ //rtc_start(); |