diff options
Diffstat (limited to 'src/mainboard')
-rw-r--r-- | src/mainboard/hp/Kconfig | 1 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/Config.lb | 131 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/Kconfig | 60 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/Makefile.inc | 22 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/Options.lb | 99 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/auto.c | 67 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/chip.h | 24 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/devicetree.cb | 62 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/irq_tables.c | 46 | ||||
-rw-r--r-- | src/mainboard/hp/e_vectra_p2706t/mainboard.c | 26 |
10 files changed, 538 insertions, 0 deletions
diff --git a/src/mainboard/hp/Kconfig b/src/mainboard/hp/Kconfig index b78032cd27..f216a7e58d 100644 --- a/src/mainboard/hp/Kconfig +++ b/src/mainboard/hp/Kconfig @@ -3,6 +3,7 @@ choice depends on VENDOR_HP source "src/mainboard/hp/dl145_g3/Kconfig" +source "src/mainboard/hp/e_vectra_p2706t/Kconfig" endchoice diff --git a/src/mainboard/hp/e_vectra_p2706t/Config.lb b/src/mainboard/hp/e_vectra_p2706t/Config.lb new file mode 100644 index 0000000000..0677bbb00c --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/Config.lb @@ -0,0 +1,131 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 +include /config/nofailovercalculation.lb + +arch i386 end +driver mainboard.o +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end +makerule ./failover.E + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./failover.inc + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./auto.E + # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" + action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" + action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" +end +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds +if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end +mainboardinit arch/i386/lib/cpu_reset.inc +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +if CONFIG_USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end +mainboardinit cpu/x86/fpu_enable.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx_disable.inc +dir /pc80 +config chip.h + +# TODO: i810E actually! +chip northbridge/intel/i82810 # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on + device pci 0.0 on end # Host bridge + chip drivers/pci/onboard # Onboard VGA + device pci 1.0 on end + register "rom_address" = "0xfff80000" # 512 KB image + end + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + # TODO: PC87364 actually! + # TODO: Check Super I/O settings and compare to superiotool -d. + chip superio/nsc/pc87360 # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # PS/2 mouse + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem (N/A ?) + end + end +end + diff --git a/src/mainboard/hp/e_vectra_p2706t/Kconfig b/src/mainboard/hp/e_vectra_p2706t/Kconfig new file mode 100644 index 0000000000..909532c765 --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/Kconfig @@ -0,0 +1,60 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# FIXME: It's a PC87360 actually. +# FIXME: It's an i810E actually! +# FIXME: ROM chip size really 512KB? +config BOARD_HP_E_VECTRA_P2706T + bool "e-Vectra P2706T" + select ARCH_X86 + select CPU_INTEL_SOCKET_PGA370 + select NORTHBRIDGE_INTEL_I82810 + select SOUTHBRIDGE_INTEL_I82801XX + select SUPERIO_NSC_PC87360 + select HAVE_PIRQ_TABLE + select UDELAY_TSC + select TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 + select BOARD_ROMSIZE_KB_512 + +config MAINBOARD_DIR + string + default hp/e_vectra_p2706t + depends on BOARD_HP_E_VECTRA_P2706T + +config MAINBOARD_PART_NUMBER + string + default "e-Vectra P2706T" + depends on BOARD_HP_E_VECTRA_P2706T + +config HAVE_OPTION_TABLE + bool + default n + depends on BOARD_HP_E_VECTRA_P2706T + +config IRQ_SLOT_COUNT + int + default 3 + depends on BOARD_HP_E_VECTRA_P2706T + +config VIDEO_MB + int + default 1 + depends on BOARD_HP_E_VECTRA_P2706T + diff --git a/src/mainboard/hp/e_vectra_p2706t/Makefile.inc b/src/mainboard/hp/e_vectra_p2706t/Makefile.inc new file mode 100644 index 0000000000..caa81b8b4e --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/Makefile.inc @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +include $(src)/mainboard/Makefile.romccboard.inc + diff --git a/src/mainboard/hp/e_vectra_p2706t/Options.lb b/src/mainboard/hp/e_vectra_p2706t/Options.lb new file mode 100644 index 0000000000..ae55471bbb --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/Options.lb @@ -0,0 +1,99 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_ROM_PAYLOAD +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PART_NUMBER +uses COREBOOT_EXTRA_VERSION +uses CONFIG_ARCH +uses CONFIG_FALLBACK_SIZE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD +uses CONFIG_ROMBASE +uses CONFIG_RAMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_CROSS_COMPILE +uses CC +uses HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_UDELAY_TSC +uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses CONFIG_WRITE_HIGH_TABLES +uses CONFIG_VIDEO_MB + +default CONFIG_ROM_SIZE = 512 * 1024 +default CONFIG_HAVE_FALLBACK_BOOT = 1 +default CONFIG_GENERATE_MP_TABLE = 0 +default CONFIG_HAVE_HARD_RESET = 0 +default CONFIG_GENERATE_PIRQ_TABLE = 1 +default CONFIG_IRQ_SLOT_COUNT = 3 +default CONFIG_MAINBOARD_VENDOR = "HP" +default CONFIG_MAINBOARD_PART_NUMBER = "e-Vectra P2706T" +default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 +default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE +default CONFIG_STACK_SIZE = 8 * 1024 +default CONFIG_HEAP_SIZE = 16 * 1024 +default CONFIG_HAVE_OPTION_TABLE = 0 +#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = 0 +default CONFIG_RAMBASE = 0x00004000 +default CONFIG_ROM_PAYLOAD = 1 +default CONFIG_CROSS_COMPILE = "" +default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" +default CONFIG_CONSOLE_SERIAL8250 = 1 +default CONFIG_TTYS0_BAUD = 115200 +default CONFIG_TTYS0_BASE = 0x3f8 +default CONFIG_TTYS0_LCS = 0x3 # 8n1 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 +default CONFIG_UDELAY_TSC = 1 +default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 +default CONFIG_CONSOLE_VGA = 1 +default CONFIG_PCI_ROM_RUN = 1 +default CONFIG_WRITE_HIGH_TABLES = 1 +default CONFIG_VIDEO_MB = 1 +end diff --git a/src/mainboard/hp/e_vectra_p2706t/auto.c b/src/mainboard/hp/e_vectra_p2706t/auto.c new file mode 100644 index 0000000000..1276e675bd --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/auto.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <arch/hlt.h> +#include <stdlib.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "lib/ramtest.c" +/* TODO: It's a PC87364 actually! */ +#include "superio/nsc/pc87360/pc87360_early_serial.c" +/* TODO: It's i810E actually! */ +#include "northbridge/intel/i82810/raminit.h" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "pc80/udelay_io.c" +#include "lib/debug.c" +#include "northbridge/intel/i82810/raminit.c" + +/* TODO: It's a PC87364 actually! */ +#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) + +static void main(unsigned long bist) +{ + if (bist == 0) + early_mtrr_init(); + + /* TODO: It's a PC87364 actually! */ + pc87360_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + uart_init(); + console_init(); + + enable_smbus(); + + report_bist_failure(bist); + + /* dump_spd_registers(); */ + sdram_set_registers(); + sdram_set_spd_registers(); + sdram_enable(); + /* ram_check(0, 640 * 1024); */ +} diff --git a/src/mainboard/hp/e_vectra_p2706t/chip.h b/src/mainboard/hp/e_vectra_p2706t/chip.h new file mode 100644 index 0000000000..5a300d9737 --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/chip.h @@ -0,0 +1,24 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config { +}; diff --git a/src/mainboard/hp/e_vectra_p2706t/devicetree.cb b/src/mainboard/hp/e_vectra_p2706t/devicetree.cb new file mode 100644 index 0000000000..e049c6b46d --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/devicetree.cb @@ -0,0 +1,62 @@ +# TODO: i810E actually! +chip northbridge/intel/i82810 # Northbridge + device apic_cluster 0 on # APIC cluster + chip cpu/intel/socket_PGA370 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on + device pci 0.0 on end # Host bridge + chip drivers/pci/onboard # Onboard VGA + device pci 1.0 on end + register "rom_address" = "0xfff80000" # 512 KB image + end + chip southbridge/intel/i82801xx # Southbridge + register "ide0_enable" = "1" + register "ide1_enable" = "1" + + device pci 1e.0 on end # PCI bridge + device pci 1f.0 on # ISA/LPC bridge + # TODO: PC87364 actually! + # TODO: Check Super I/O settings and compare to superiotool -d. + chip superio/nsc/pc87360 # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # PS/2 mouse + device pnp 2e.6 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1f.1 on end # IDE + device pci 1f.2 on end # USB + device pci 1f.3 on end # SMBus + device pci 1f.5 on end # AC'97 audio + device pci 1f.6 off end # AC'97 modem (N/A ?) + end + end +end + diff --git a/src/mainboard/hp/e_vectra_p2706t/irq_tables.c b/src/mainboard/hp/e_vectra_p2706t/irq_tables.c new file mode 100644 index 0000000000..5fdf531af5 --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/irq_tables.c @@ -0,0 +1,46 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, + PIRQ_VERSION, + 32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */ + 0x00, /* Interrupt router bus */ + (0x1f << 3) | 0x0, /* Interrupt router device */ + 0x0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x2410, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x59, /* Checksum */ + { + /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00, (0x01 << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x1e << 3) | 0x0, {{0x60, 0xdeb8}, {0x61, 0xdeb8}, {0x62, 0xdeb8}, {0x63, 0xdeb8}}, 0x0, 0x0}, + {0x00, (0x1f << 3) | 0x0, {{0xfe, 0x4000}, {0x61, 0xdeb8}, {0x00, 0x0000}, {0x63, 0xdeb8}}, 0x0, 0x0}, + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/hp/e_vectra_p2706t/mainboard.c b/src/mainboard/hp/e_vectra_p2706t/mainboard.c new file mode 100644 index 0000000000..1e27514b0e --- /dev/null +++ b/src/mainboard/hp/e_vectra_p2706t/mainboard.c @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("HP e-Vectra P2706T Mainboard") +}; |