summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/deltaur/Kconfig1
-rw-r--r--src/mainboard/google/deltaur/variants/baseboard/devicetree.cb332
2 files changed, 333 insertions, 0 deletions
diff --git a/src/mainboard/google/deltaur/Kconfig b/src/mainboard/google/deltaur/Kconfig
index dcbe5ecbad..6b4af9b592 100644
--- a/src/mainboard/google/deltaur/Kconfig
+++ b/src/mainboard/google/deltaur/Kconfig
@@ -4,6 +4,7 @@ config BOARD_GOOGLE_BASEBOARD_DELTAUR
select DRIVERS_I2C_GENERIC
select DRIVERS_INTEL_ISH
select DRIVERS_SPI_ACPI
+ select DRIVERS_USB_ACPI
select EC_GOOGLE_WILCO
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
diff --git a/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb b/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb
index a4031622ef..a63d66c834 100644
--- a/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb
@@ -3,4 +3,336 @@ chip soc/intel/tigerlake
device cpu_cluster 0 on
device lapic 0 on end
end
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+
+ # TODO: Figure out GPE DW1&2
+ register "pmc_gpe0_dw0" = "GPP_C"
+ #register "pmc_gpe0_dw1" = "??"
+ #register "pmc_gpe0_dw2" = "??"
+
+ # Wilco EC host command ranges
+ register "gen1_dec" = "0x00040931" # 0x930-0x937
+ register "gen2_dec" = "0x00040941" # 0x940-0x947
+ register "gen3_dec" = "0x000c0951" # 0x950-0x95f
+
+ register "s0ix_enable" = "1"
+
+ # TODO: not yet
+ register "dptf_enable" = "0"
+
+ register "tcc_offset" = "0"
+
+ # FSP configuration
+ register "SaGv" = "SaGv_Disabled"
+
+ register "SataEnable" = "1"
+ register "SataMode" = "0"
+ register "SataSalpSupport" = "1"
+ register "SmbusEnable" = "1"
+
+ # TODO: the lengths are all MID for right now.
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port 1
+ register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port 2
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC0)" # Ext USB Port 1 (Right)
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # Ext USB Port 2 (Left)
+ register "usb2_ports[4]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # M.2 3042 (WWAN)
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # USH
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY"
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # BT
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Ext USB Port 1
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Ext USB Port 2
+
+ # PCIe root port 6 (WLAN), clock 1
+ register "PcieRpEnable[5]" = "1"
+ register "PcieClkSrcUsage[1]" = "5"
+ register "PcieClkSrcClkReq[1]" = "1"
+
+ # PCIe root port 7 (Card Reader), clock 4
+ register "PcieRpEnable[6]" = "1"
+ register "PcieClkSrcUsage[4]" = "6"
+ register "PcieClkSrcClkReq[4]" = "4"
+
+ # PCIe port root 8 (LAN), clock 3
+ register "PcieRpEnable[7]" = "1"
+ register "PcieClkSrcUsage[3]" = "PCIE_CLK_LAN"
+ register "PcieClkSrcClkReq[3]" = "3"
+
+ # PCIe root port 9 (NVMe), clock 2
+ register "PcieRpEnable[8]" = "1"
+ register "PcieClkSrcUsage[2]" = "8"
+ register "PcieClkSrcClkReq[2]" = "2"
+
+ # Mark unused SRCCLKREQs as so
+ register "PcieClkSrcUsage[0]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcUsage[5]" = "PCIE_CLK_NOTUSED"
+ register "PcieClkSrcUsage[6]" = "PCIE_CLK_NOTUSED"
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
+ #| I2C0 | Touchscreen |
+ #| I2C1 | Touchpad |
+ #| I2C2 | ISH ? |
+ #| I2C3 | cr50 TPM |
+ #| I2C5 | ISH ? |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[2] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[3] = {
+ .speed = I2C_SPEED_FAST,
+ .early_init = 1,
+ },
+ .i2c[5] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ }"
+
+ register "SerialIoI2cMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoPci,
+ [PchSerialIoIndexI2C3] = PchSerialIoPci,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
+
+ register "SerialIoUartMode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART2] = PchSerialIoPci,
+ }"
+
+ register "SerialIoGSpiMode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI3] = PchSerialIoDisabled,
+ }"
+
+ # HD Audio
+ register "PchHdaDspEnable" = "1"
+ register "PchHdaAudioLinkHdaEnable" = "0"
+ register "PchHdaAudioLinkDmicEnable[0]" = "1"
+ register "PchHdaAudioLinkDmicEnable[1]" = "1"
+ register "PchHdaAudioLinkSspEnable[0]" = "1"
+ register "PchHdaAudioLinkSspEnable[1]" = "1"
+
+ # TCSS USB3
+ register "TcssXhciEn" = "1"
+
+ # DisplayPort
+ register "DdiPortAConfig" = "1" # eDP
+ register "DdiPortAHpd" = "1"
+
+ # Disable PM to allow for shorter irq pulses
+ register "gpio_override_pm" = "1"
+ register "gpio_pm[0]" = "0"
+ register "gpio_pm[1]" = "0"
+ register "gpio_pm[2]" = "0"
+ register "gpio_pm[3]" = "0"
+ register "gpio_pm[4]" = "0"
+
+ # Enable "Intel Speed Shift Technology"
+ register "speed_shift_enable" = "1"
+
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Graphics
+ device pci 04.0 on end # DPTF
+ device pci 05.0 off end # IPU
+ device pci 06.0 off end # PEG60
+ device pci 07.0 on end # TBT_PCIe0
+ device pci 07.1 on end # TBT_PCIe0
+ device pci 07.2 on end # TBT_PCIe0
+ device pci 07.3 on end # TBT_PCIe0
+ device pci 08.0 on end # GNA
+ device pci 09.0 off end # NPK
+ device pci 0a.0 off end # Crash-log SRAM
+ device pci 0d.0 on end # USB xHCI
+ device pci 0d.1 off end # USB xDCI
+ device pci 0d.2 off end # TBT DMA0
+ device pci 0d.3 off end # TBT DMA1
+ device pci 0e.0 off end # VMD
+
+ device pci 10.0 off end # THC #0
+ device pci 10.1 off end # THC #1
+ device pci 10.2 on end # CNVi Bluetooth
+ device pci 11.0 off end # UART #3
+ device pci 11.1 off end # UART4
+ device pci 11.2 off end # UART5
+ device pci 11.3 off end # UART6
+
+ device pci 12.0 on end # ISH
+ device pci 12.6 off end # GSPI #2
+ device pci 13.0 off end # GSPI #3
+ device pci 13.1 off end # GSPI #4
+ device pci 13.2 off end # GSPI #5
+ device pci 13.3 off end # GSPI #6
+
+ device pci 14.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""Root Hub""
+ register "type" = "UPC_TYPE_HUB"
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""Type-C Port 1""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device usb 2.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-C Port 2""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(2, 1)"
+ device usb 2.1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-A Port 1 (Right)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(2, 2)"
+ device usb 2.2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-A Port 2 (Left)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 2.3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Camera""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.5 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""M.2 3042 (WWAN)""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.6 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USH""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.7 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""M.2 2230 (BT)""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 2.9 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-C Port 1""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device usb 3.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-C Port 2""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(2, 1)"
+ device usb 3.1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-A Port 1 (Right)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(2, 2)"
+ device usb 3.2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Type-A Port 2 (Left)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 3.3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""WWAN""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device usb 3.4 on end
+ end
+ end
+ end
+ end # USB 3.2 2x1 xHCI HC
+
+ device pci 14.1 off end # USB 3.2 1x1 xDCI HC
+ device pci 14.2 on end # Shared SRAM
+
+ chip drivers/intel/wifi
+ register "wake" = "GPE0_PME_B0"
+ device pci 14.3 on end # CNVi WiFi
+ end
+
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
+ device pci 15.2 on end # I2C #2
+ device pci 15.3 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C23_IRQ)"
+ device i2c 50 on end
+ end
+ end # I2C #3
+
+ device pci 16.0 on end # HECI #1
+ device pci 16.1 off end # HECI #2
+ device pci 16.2 off end # IDE-R
+ device pci 16.3 off end # KT-T
+ device pci 16.4 on end # HECI #3
+ device pci 16.5 on end # HECI #4
+ device pci 17.0 on end # SATA (AHCI)
+ device pci 19.0 off end # I2C #4
+ device pci 19.1 on end # I2C #5
+ device pci 19.2 on end # UART #2
+
+ device pci 1c.0 on end # PCIe Root Port #1 (USB)
+ device pci 1c.1 on end # PCIe Root Port #2 (USB)
+ device pci 1c.2 off end # PCIe Root Port #3 ()
+ device pci 1c.3 on end # PCIe Root Port #4 (WWAN)
+ device pci 1c.4 on end # PCIe Root Port #5 (LTE)
+ device pci 1c.5 on end # PCIe Root Port #6 (WiFi)
+ device pci 1c.6 on end # PCIe Root Port #7 (Card reader)
+ device pci 1c.7 on
+ chip drivers/net
+ register "wake" = "GPE0_PME_B0"
+ device pci 00.0 on end
+ end
+ end # PCIe Root Port #8 (LAN)
+ device pci 1d.0 on end # PCIe Root Port #9 (NVMe)
+ device pci 1d.1 off end # PCIe Root Port #10 (NVMe)
+ device pci 1d.2 off end # PCIe Root Port #11 (NVMe)
+ device pci 1d.3 off end # PCIe Root Port #12 (NVMe)
+
+ device pci 1e.0 off end # UART #0
+ device pci 1e.1 off end # UART #1
+ device pci 1e.2 off end # GSPI #0
+ device pci 1e.3 off end # GSPI #1
+
+ device pci 1f.0 on
+ chip ec/google/wilco
+ device pnp 0c09.0 on end
+ end
+ end # eSPI
+ device pci 1f.1 off end # P2SB
+ device pci 1f.2 on end # PMC
+ device pci 1f.3 on end # Intel HDA
+ device pci 1f.4 on end # SMBus
+ device pci 1f.5 on end # PCH SPI Flash Controller
+ device pci 1f.6 on end # GbE Controller
+ device pci 1f.7 off end # Intel Trace Hub
+ end
end