summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/hatch/variants/noibat/overridetree.cb19
1 files changed, 8 insertions, 11 deletions
diff --git a/src/mainboard/google/hatch/variants/noibat/overridetree.cb b/src/mainboard/google/hatch/variants/noibat/overridetree.cb
index 050a75a4cc..ed5fab2794 100644
--- a/src/mainboard/google/hatch/variants/noibat/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/noibat/overridetree.cb
@@ -21,9 +21,6 @@ chip soc/intel/cannonlake
}"
# USB configuration
- # NOTE: This only applies to Puff,
- # usb2_ports[1] and usb2_ports[3] were swapped on
- # reference schematics after Puff has been built.
register "usb2_ports[0]" = "{
.enable = 1,
.ocpin = OC2,
@@ -32,23 +29,23 @@ chip soc/intel/cannonlake
.pre_emp_bias = USB2_BIAS_11P25MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 2
- register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
- register "usb2_ports[2]" = "{
+ register "usb2_ports[1]" = "{
.enable = 1,
- .ocpin = OC3,
+ .ocpin = OC1,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
- }" # Type-A Port 3
- register "usb2_ports[3]" = "{
+ }" # Type-A Port 1
+ register "usb2_ports[2]" = "{
.enable = 1,
- .ocpin = OC1,
+ .ocpin = OC3,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
- }" # Type-A Port 1
+ }" # Type-A Port 3
+ register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
register "usb2_ports[4]" = "USB2_PORT_EMPTY"
register "usb2_ports[5]" = "{
.enable = 1,
@@ -125,7 +122,7 @@ chip soc/intel/cannonlake
# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515"
- # Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them.
+ # Intel HDA - disable I2S Audio SSP1 and DMIC0 as noibat variant does not have them.
register "PchHdaAudioLinkSsp1" = "0"
register "PchHdaAudioLinkDmic0" = "0"