summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/chell/devicetree.cb6
-rw-r--r--src/mainboard/google/eve/devicetree.cb8
-rw-r--r--src/mainboard/google/glados/devicetree.cb6
-rw-r--r--src/mainboard/google/lars/devicetree.cb6
-rw-r--r--src/mainboard/google/poppy/devicetree.cb6
-rw-r--r--src/mainboard/google/reef/variants/baseboard/devicetree.cb10
-rw-r--r--src/mainboard/google/reef/variants/pyro/devicetree.cb10
-rw-r--r--src/mainboard/google/reef/variants/snappy/devicetree.cb12
-rw-r--r--src/mainboard/intel/kunimitsu/devicetree.cb6
-rw-r--r--src/mainboard/intel/leafhill/devicetree.cb10
10 files changed, 40 insertions, 40 deletions
diff --git a/src/mainboard/google/chell/devicetree.cb b/src/mainboard/google/chell/devicetree.cb
index 2ffaec6946..477a8aa777 100644
--- a/src/mainboard/google/chell/devicetree.cb
+++ b/src/mainboard/google/chell/devicetree.cb
@@ -201,7 +201,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
@@ -209,7 +209,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
@@ -226,7 +226,7 @@ chip soc/intel/skylake
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
- register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
diff --git a/src/mainboard/google/eve/devicetree.cb b/src/mainboard/google/eve/devicetree.cb
index e40f0a3093..e5ac17f738 100644
--- a/src/mainboard/google/eve/devicetree.cb
+++ b/src/mainboard/google/eve/devicetree.cb
@@ -208,7 +208,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPP_E7_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.speed" = "I2C_SPEED_FAST_PLUS"
register "hid_desc_reg_offset" = "0x1"
device i2c 0a on end
@@ -217,7 +217,7 @@ chip soc/intel/skylake
device pci 15.1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPP_E0_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
device i2c 50 on end
end
end # I2C #1
@@ -225,7 +225,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""GOOG5400""
register "desc" = ""Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
device i2c 49 on end
end
end # I2C #2
@@ -257,7 +257,7 @@ chip soc/intel/skylake
register "hid" = ""10EC5663""
register "name" = ""RT53""
register "desc" = ""Realtek RT5663""
- register "irq" = "IRQ_LEVEL_LOW(GPP_D9_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)"
register "probed" = "1"
device i2c 13 on end
end
diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb
index d0584ea7c9..f7a2e52a19 100644
--- a/src/mainboard/google/glados/devicetree.cb
+++ b/src/mainboard/google/glados/devicetree.cb
@@ -199,7 +199,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
@@ -207,7 +207,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
@@ -224,7 +224,7 @@ chip soc/intel/skylake
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
- register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0" # R389
register "jkdet_polarity" = "1" # ActiveLow
diff --git a/src/mainboard/google/lars/devicetree.cb b/src/mainboard/google/lars/devicetree.cb
index 4291e5f851..b95ecf5d88 100644
--- a/src/mainboard/google/lars/devicetree.cb
+++ b/src/mainboard/google/lars/devicetree.cb
@@ -196,7 +196,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
@@ -204,7 +204,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
@@ -221,7 +221,7 @@ chip soc/intel/skylake
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
- register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
diff --git a/src/mainboard/google/poppy/devicetree.cb b/src/mainboard/google/poppy/devicetree.cb
index b3b76235ee..07cacc0500 100644
--- a/src/mainboard/google/poppy/devicetree.cb
+++ b/src/mainboard/google/poppy/devicetree.cb
@@ -201,7 +201,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ATML0001""
register "desc" = ""Atmel Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
register "probed" = "1"
device i2c 4b on end
end
@@ -212,7 +212,7 @@ chip soc/intel/skylake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPP_D1_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D1_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end
@@ -243,7 +243,7 @@ chip soc/intel/skylake
register "hid" = ""10EC5663""
register "name" = ""RT53""
register "desc" = ""Realtek RT5663""
- register "irq" = "IRQ_LEVEL_LOW(GPP_D9_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)"
register "probed" = "1"
device i2c 13 on end
end
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
index 6e51838ecd..b0c82e2be8 100644
--- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
@@ -146,7 +146,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -167,7 +167,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -175,7 +175,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -189,7 +189,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
@@ -199,7 +199,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_13_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_13_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end
diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb
index a01fa04d35..808ed2c4e7 100644
--- a/src/mainboard/google/reef/variants/pyro/devicetree.cb
+++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb
@@ -155,7 +155,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -176,7 +176,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -184,7 +184,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOMNTN2""
register "generic.desc" = ""WCOM Touchscreen""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_21_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_21_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "generic.reset_delay_ms" = "20"
@@ -198,7 +198,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -212,7 +212,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
diff --git a/src/mainboard/google/reef/variants/snappy/devicetree.cb b/src/mainboard/google/reef/variants/snappy/devicetree.cb
index 8d9d307228..6d1c9ef145 100644
--- a/src/mainboard/google/reef/variants/snappy/devicetree.cb
+++ b/src/mainboard/google/reef/variants/snappy/devicetree.cb
@@ -146,7 +146,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -167,7 +167,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -175,7 +175,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -187,7 +187,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WDHT0001""
register "generic.desc" = ""WDT Touchscreen""
- register "generic.irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "generic.reset_delay_ms" = "20"
@@ -203,7 +203,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
@@ -213,7 +213,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_13_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_13_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb
index 6a6c2ce0e4..11cb31a413 100644
--- a/src/mainboard/intel/kunimitsu/devicetree.cb
+++ b/src/mainboard/intel/kunimitsu/devicetree.cb
@@ -206,7 +206,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
device i2c 10 on end
end
end # I2C #0
@@ -214,7 +214,7 @@ chip soc/intel/skylake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPP_B3_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_05"
device i2c 15 on end
end
@@ -231,7 +231,7 @@ chip soc/intel/skylake
device pci 19.1 off end # I2C #5
device pci 19.2 on
chip drivers/i2c/nau8825
- register "irq" = "IRQ_LEVEL_LOW(GPP_F10_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "1"
register "jkdet_pull_up" = "1"
diff --git a/src/mainboard/intel/leafhill/devicetree.cb b/src/mainboard/intel/leafhill/devicetree.cb
index 6e51838ecd..b0c82e2be8 100644
--- a/src/mainboard/intel/leafhill/devicetree.cb
+++ b/src/mainboard/intel/leafhill/devicetree.cb
@@ -146,7 +146,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -167,7 +167,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -175,7 +175,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -189,7 +189,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
@@ -199,7 +199,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_13_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_13_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end