diff options
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c index aa4a906c5a..b770bdcbee 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c @@ -74,7 +74,7 @@ static const struct pad_config gpio_table[] = { /* SDCARD_WP_1V8 */ PAD_CFG_GPI_GPIO_DRIVER(GPIO_186, DN_20K, DEEP), /* SD_PWR_EN_1V8 - Always enabled SDCard. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_183, 0, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_183, 0, UP_20K, DEEP), /* West Community */ @@ -208,15 +208,15 @@ static const struct pad_config gpio_table[] = { /* EDP_VDD_EN_1V8 (DNI) - Alternative stuffing option for * PTN3460 LVDS_VDD_EN. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_196, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_196, 1, UP_20K, DEEP), /* EDP_BKLT_EN_1V8 (DNI) - Alternative stuffing option for * PTN3460 LVDS_BKLT_EN */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_197, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_197, 1, UP_20K, DEEP), /* EDP_BKLT_CTRL_1V8 - Alternative stuffing option for * PTN3460 LVDS_BKLT_CTRL */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_198, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_198, 1, UP_20K, DEEP), /* DDI1_HPD# - Connect to DP1_HPD Hot plug detection signal of SMARC * Connector. @@ -263,8 +263,8 @@ static const struct pad_config gpio_table[] = { /* Not connected */ PAD_CFG_NF(PMIC_PWRGOOD, UP_20K, DEEP, NF1), - PAD_CFG_GPO_GPIO_DRIVER(GPIO_214, 1, DEEP, DN_20K), - PAD_CFG_GPO_GPIO_DRIVER(GPIO_215, 1, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_214, 1, DN_20K, DEEP), + PAD_CFG_TERM_GPO(GPIO_215, 1, DN_20K, DEEP), /* THERMTRIP_1V8# - Connected to CPLD */ PAD_CFG_NF_IOSSTATE_IOSTERM(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1, TxLASTRxE, SAME), @@ -390,15 +390,15 @@ static const struct pad_config gpio_table[] = { /* OTG_SEL_1V8 - Connected to a USB MUX to select between USB2_DP0 (OTG) * and USB2_DP6. 1:OTG, 0:USB */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_9, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_9, 1, UP_20K, DEEP), /* EN_I2CPM_EXT_1V8 - Connected to OE pin of I2C Re-driver. * Allow/Disallow I2C signal to pass through to SMARC Connector. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_10, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_10, 1, UP_20K, DEEP), /* EN_SMB_EXT_1V8 - Connected to OE pin of I2C Re-driver. * Allow/Disallow SMBUS signal to pass through to SMARC Connector. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_11, 0, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_11, 0, UP_20K, DEEP), /* BOOT_SEL2_1V8# - Three Module pins allow the Carrier board user to * select from eight possible boot devices. */ @@ -413,13 +413,13 @@ static const struct pad_config gpio_table[] = { */ PAD_CFG_GPI_INT(GPIO_14, UP_20K, DEEP, OFF), /* GPIO_CPLD_TCK_1V8 */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_15, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_15, 0, DN_20K, DEEP), /* GPIO_CPLD_TMS_1V8 */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_16, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_16, 0, DN_20K, DEEP), /* GPIO_CPLD_TDI_1V8 */ PAD_CFG_GPI_INT(GPIO_17, DN_20K, DEEP, OFF), /* GPIO_CPLD_TDO_1V8 */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_18, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_18, 0, DN_20K, DEEP), /* PM_TEST_1V8# connect to the SMARC Connector TEST# pin. * Held low by Carrier to invoke Module vendor specific test function. * Pulled up on Module. Driven by OD part on Carrier. @@ -464,9 +464,9 @@ static const struct pad_config gpio_table[] = { /* SMB_ALERT_GPIO# */ PAD_CFG_GPI_INT(GPIO_27, UP_20K, DEEP, OFF), /* GPIO_28_DEBUG - Connect to HOOK5 (ClkOut#) pin of XDP connector */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_28, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_28, 1, UP_20K, DEEP), /* GPIO_29_DEBUG - Connect to HOOK4 (ClkOut) pin of XDP connector */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_29, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_29, 0, DN_20K, DEEP), /* Not connected */ PAD_CFG_GPI_INT(GPIO_30, DN_20K, DEEP, OFF), @@ -484,21 +484,21 @@ static const struct pad_config gpio_table[] = { /* STRAP_GPIO_36 (int. PD) */ PAD_CFG_GPI_INT(GPIO_36, DN_20K, DEEP, OFF), /* Not connected */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_37, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_37, 0, DN_20K, DEEP), /* GPIO_VALID (CPLD=gpio_valid/pi_gpio_en)- This pin Enable the CPLD * GPIO to the SMARC Connector. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_62, 1, DEEP, UP_20K), + PAD_CFG_TERM_GPO(GPIO_62, 1, UP_20K, DEEP), /* LVDS_ENABLE_1V8# connect to PTN3460 DP to LVDS converter chip. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_63, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_63, 0, DN_20K, DEEP), /* Not connected */ PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_64, DN_20K, DEEP, HIZCRx0, SAME), /* Not connected */ PAD_CFG_GPIO_DRIVER_HI_Z(GPIO_65, DN_20K, DEEP, HIZCRx0, SAME), /* CAM_CS0_CS1_SEL - Serial Cameras interfaces Select - to select * between the two MIPI CSI camera interfaces on the SMARC connector. */ - PAD_CFG_GPO_GPIO_DRIVER(GPIO_66, 0, DEEP, DN_20K), + PAD_CFG_TERM_GPO(GPIO_66, 0, DN_20K, DEEP), /* MCSI0_RST_1V8# - Reset the MIPI CSI camera interfaces 0 */ PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_67, 0, DEEP, DN_20K, HIZCRx0, SAME), /* MCSI1_RST_1V8# - Reset the MIPI CSI camera interfaces 1 */ |