1 files changed, 0 insertions, 121 deletions

diff --git a/src/northbridge/amd/agesa/family15/agesawrapper.c b/src/northbridge/amd/agesa/family15/agesawrapper.c
index 2bc3e959d8..271b4df2b0 100644
--- a/src/northbridge/amd/agesa/family15/agesawrapper.c
+++ b/src/northbridge/amd/agesa/family15/agesawrapper.c
@@ -60,127 +60,6 @@ void OemCustomizeInitPost(AMD_POST_PARAMS *InitPost)
 #endif
 }
 
-#if !IS_ENABLED(CONFIG_BOARD_AMD_DINAR)
-AGESA_STATUS agesawrapper_amdinitcpuio(void)
-{
-	UINT32 PciData;
-	PCI_ADDR PciAddress;
-	AMD_CONFIG_PARAMS StdHeader;
-	UINT32 nodes;
-	UINT32 node;
-	UINT32 sblink;
-	UINT32 i;
-	UINT32 TOM;
-
-	/* get the number of coherent nodes in the system */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60);
-	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	nodes = ((PciData >> 4) & 7) + 1;	//NodeCnt[2:0]
-
-	/* Find out the Link ID of Node0 that connects to the
-	 * Southbridge (system IO hub). e.g. family10 MCM Processor,
-	 * sbLink is Processor0 Link2, internal Node0 Link3
-	 */
-	PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64);
-	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	sblink = (PciData >> 8) & 3;	//assume ganged
-
-	/* Enable MMIO on AMD CPU Address Map Controller for all nodes */
-	for (node = 0; node < nodes; node++) {
-		/* clear all MMIO Mapped Base/Limit Registers */
-		for (i = 0; i < 8; i++) {
-			PciData = 0x00000000;
-			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80 + i * 8);
-			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84 + i * 8);
-			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		}
-
-		/* clear all IO Space Base/Limit Registers */
-		for (i = 0; i < 4; i++) {
-			PciData = 0x00000000;
-			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4 + i * 8);
-			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-			PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0 + i * 8);
-			LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		}
-
-		/* Set VGA Ram MMIO 0000A0000-0000BFFFF to Node0 sbLink */
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x84);
-		PciData = 0x00000B00;
-		PciData |= sblink << 4;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x80);
-		PciData = 0x00000A03;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
-		/* Set TOM1-FFFFFFFF to Node0 sbLink. */
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x8C);
-		PciData = 0x00FFFF00;
-		PciData |= sblink << 4;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		TOM = (UINT32) MsrRead(TOP_MEM);
-		PciData = (TOM >> 8) | 0x03;
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0x88);
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
-		/* Set MMCONF space to Node0 sbLink with NP set.
-		 * default E0000000-EFFFFFFF
-		 * Just have all mmio set to non-posted,
-		 * coreboot not implemente the range by range setting yet.
-		 */
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xBC);
-		PciData = CONFIG_MMCONF_BASE_ADDRESS + (CONFIG_MMCONF_BUS_NUMBER * 0x100000) - 1;	//1MB each bus
-		PciData = (PciData >> 8) & 0xFFFFFF00;
-		PciData |= 0x80;	//NP
-		PciData |= sblink << 4;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xB8);
-		PciData = (CONFIG_MMCONF_BASE_ADDRESS >> 8) | 0x03;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
-		/* Set PCIO: 0x0 - 0xFFF000 to Node0 sbLink  and enabled VGA IO */
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC4);
-		PciData = 0x00FFF000;
-		PciData |= sblink << 4;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-		PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB + node, FUNC_1, 0xC0);
-		PciData = 0x00000033;
-		LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-	}
-
-	return AGESA_SUCCESS;
-}
-
-AGESA_STATUS agesawrapper_amdinitmmio(void)
-{
-	UINT64 MsrReg;
-	AMD_CONFIG_PARAMS StdHeader;
-
-	/*
-	 * Set the MMIO Configuration Base Address and Bus Range onto
-	 * MMIO configuration base Address MSR register.
-	 */
-	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
-	LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);
-
-	/*
-	 * Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
-	 */
-	LibAmdMsrRead(0xC001001F, &MsrReg, &StdHeader);
-	MsrReg = MsrReg | (1ULL << 46);
-	LibAmdMsrWrite(0xC001001F, &MsrReg, &StdHeader);
-
-	/* Set ROM cache onto WP to decrease post time */
-	MsrReg = (0x0100000000 - CACHE_ROM_SIZE) | 5;
-	LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader);
-	MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
-	LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);
-
-	return AGESA_SUCCESS;
-}
-#endif
-
 AGESA_STATUS agesawrapper_amdinitreset(void)
 {
 	AGESA_STATUS status = AGESA_SUCCESS;