diff options
Diffstat (limited to 'src/northbridge/amd/amdfam10/Kconfig')
| -rw-r--r-- | src/northbridge/amd/amdfam10/Kconfig | 132 |
1 files changed, 132 insertions, 0 deletions
diff --git a/src/northbridge/amd/amdfam10/Kconfig b/src/northbridge/amd/amdfam10/Kconfig index 13b912ec7e..1c785904c6 100644 --- a/src/northbridge/amd/amdfam10/Kconfig +++ b/src/northbridge/amd/amdfam10/Kconfig @@ -124,4 +124,136 @@ config SVI_HIGH_FREQ Select this for boards with a Voltage Regulator able to operate at 3.4 MHz in SVI mode. Ignored unless the AMD CPU is rev C3. +menu "HyperTransport setup" + #could be implemented for K8 (NORTHBRIDGE_AMD_AMDK8) + depends on (NORTHBRIDGE_AMD_AMDFAM10) && EXPERT + +choice + prompt "HyperTransport frequency" + default LIMIT_HT_SPEED_AUTO + help + This option sets the maximum permissible HyperTransport link + frequency. + + Use of this option will only limit the autodetected HT frequency. + It will not (and cannot) increase the frequency beyond the + autodetected limits. + + This is primarily used to work around poorly designed or laid out + HT traces on certain motherboards. + +config LIMIT_HT_SPEED_200 + bool "Limit HT frequency to 200MHz" +config LIMIT_HT_SPEED_300 + bool "Limit HT frequency to 300MHz" +config LIMIT_HT_SPEED_400 + bool "Limit HT frequency to 400MHz" +config LIMIT_HT_SPEED_500 + bool "Limit HT frequency to 500MHz" +config LIMIT_HT_SPEED_600 + bool "Limit HT frequency to 600MHz" +config LIMIT_HT_SPEED_800 + bool "Limit HT frequency to 800MHz" +config LIMIT_HT_SPEED_1000 + bool "Limit HT frequency to 1.0GHz" +config LIMIT_HT_SPEED_1200 + bool "Limit HT frequency to 1.2GHz" +config LIMIT_HT_SPEED_1400 + bool "Limit HT frequency to 1.4GHz" +config LIMIT_HT_SPEED_1600 + bool "Limit HT frequency to 1.6GHz" +config LIMIT_HT_SPEED_1800 + bool "Limit HT frequency to 1.8GHz" +config LIMIT_HT_SPEED_2000 + bool "Limit HT frequency to 2.0GHz" +config LIMIT_HT_SPEED_2200 + bool "Limit HT frequency to 2.2GHz" +config LIMIT_HT_SPEED_2400 + bool "Limit HT frequency to 2.4GHz" +config LIMIT_HT_SPEED_2600 + bool "Limit HT frequency to 2.6GHz" +config LIMIT_HT_SPEED_AUTO + bool "Autodetect HT frequency" +endchoice + +choice + prompt "HyperTransport downlink width" + default LIMIT_HT_DOWN_WIDTH_16 + help + This option sets the maximum permissible HyperTransport + downlink width. + + Use of this option will only limit the autodetected HT width. + It will not (and cannot) increase the width beyond the autodetected + limits. + + This is primarily used to work around poorly designed or laid out HT + traces on certain motherboards. + +config LIMIT_HT_DOWN_WIDTH_8 + bool "8 bits" +config LIMIT_HT_DOWN_WIDTH_16 + bool "16 bits" +endchoice + +choice + prompt "HyperTransport uplink width" + default LIMIT_HT_UP_WIDTH_16 + help + This option sets the maximum permissible HyperTransport + uplink width. + + Use of this option will only limit the autodetected HT width. + It will not (and cannot) increase the width beyond the autodetected + limits. + + This is primarily used to work around poorly designed or laid out HT + traces on certain motherboards. + +config LIMIT_HT_UP_WIDTH_8 + bool "8 bits" +config LIMIT_HT_UP_WIDTH_16 + bool "16 bits" +endchoice + +config AMDMCT_ENABLE_ECC_REDIR + bool + depends on CPU_AMD_MODEL_10XXX + default n + +config AMDMCT_BACKGROUND_SCRUB_RATE + hex + depends on CPU_AMD_MODEL_10XXX + default 0x00 + help + This option sets the background ECC memory scub rate + + Permissible values are: + + 0x00; Disabled + 0x01; 40ns + 0x02; 80ns + 0x03; 160ns + 0x04; 320ns + 0x05; 640ns + 0x06; 1.28us + 0x07; 2.56us + 0x08; 5.12us + 0x09; 10.2us + 0x0a; 20.5us + 0x0b; 41us + 0x0c; 81.9us + 0x0d; 163.8us + 0x0e; 327.7us + 0x0f; 655.4us + 0x10; 1.31ms + 0x11; 2.62ms + 0x12; 5.24ms + 0x13; 10.49ms + 0x14; 20.97sms + 0x15; 42ms + 0x16; 84ms + +endmenu + endif # NORTHBRIDGE_AMD_AMDFAM10 |