diff options
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit_f.c')
| -rw-r--r-- | src/northbridge/amd/amdk8/raminit_f.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c index 6872883416..b89aa38d6a 100644 --- a/src/northbridge/amd/amdk8/raminit_f.c +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -393,7 +393,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * 110 = 8 bus clocks * 111 = 9 bus clocks * [ 7: 7] Reserved - * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay, + * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay, * minium write-to-read delay when both access the same chip select) * 00 = Reserved * 01 = 1 bus clocks @@ -525,7 +525,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_in * registered DIMM is present * [19:19] Reserved * [20:20] SlowAccessMode (Slow Access Mode (2T Mode)) - * 0 = DRAM address and control signals are driven for one + * 0 = DRAM address and control signals are driven for one * MEMCLK cycle * 1 = One additional MEMCLK of setup time is provided on all * DRAM address and control signals except CS, CKE, and ODT; @@ -720,7 +720,7 @@ static int is_opteron(const struct mem_controller *ctrl) { /* Test to see if I am an Opteron. M2 and S1G1 support dual * channel, too, but only support unbuffered DIMMs so we need a - * better test for Opterons. + * better test for Opterons. * However, all code uses is_opteron() to find out whether to * use dual channel, so if we really check for opteron here, we * need to fix up all code using this function, too. @@ -1221,7 +1221,7 @@ static unsigned long order_chip_selects(const struct mem_controller *ctrl) csbase = value; canidate = index; } - + /* See if I have found a new canidate */ if (csbase == 0) { break; @@ -1640,7 +1640,7 @@ static uint8_t get_exact_divisor(int i, uint8_t divisor) /*15*/ 200, 160, 120, 100, }; - + int index; msr_t msr; @@ -1659,7 +1659,7 @@ static uint8_t get_exact_divisor(int i, uint8_t divisor) unsigned fid_start; msr = rdmsr(0xc0010015); fid_start = (msr.lo & (0x3f << 24)); - + index = fid_start>>25; } @@ -1843,7 +1843,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller * continue; } } - + } /* Make a second pass through the dimms and disable * any that cannot support the selected memclk and cas latency. @@ -2060,7 +2060,7 @@ static int update_dimm_TT_1_4(const struct mem_controller *ctrl, const struct me if (clocks < TT_MIN) { clocks = TT_MIN; } - + if (clocks > TT_MAX) { printk(BIOS_INFO, "warning spd byte : %x = %x > TT_MAX: %x, setting TT_MAX", SPD_TT, value, TT_MAX); clocks = TT_MAX; @@ -3001,7 +3001,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl, #else int suspend = 0; #endif - + #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 unsigned cpu_f0_f1[8]; /* FIXME: How about 32 node machine later? */ |