diff options
Diffstat (limited to 'src/northbridge/amd/gx2/chipsetinit.c')
-rw-r--r-- | src/northbridge/amd/gx2/chipsetinit.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/src/northbridge/amd/gx2/chipsetinit.c b/src/northbridge/amd/gx2/chipsetinit.c index 620f56452d..f0b99e7e9d 100644 --- a/src/northbridge/amd/gx2/chipsetinit.c +++ b/src/northbridge/amd/gx2/chipsetinit.c @@ -61,7 +61,7 @@ static struct msrinit CS5536_CLOCK_GATING_TABLE[] = { #ifdef UNUSED_CODE struct acpiinit { - unsigned short ioreg; + unsigned short ioreg; unsigned long regdata; unsigned short iolen; }; @@ -116,21 +116,21 @@ static void pmChipsetInit(void) port = (PMLogic_BASE + 0x034); val = 0x0A0 ; /* 5ms*/ outl(val, port); - + /* PM_WKD*/ port = (PMLogic_BASE + 0x030); outl(val, port); - + /* PM_SED*/ port = (PMLogic_BASE + 0x014); val = 0x04601 ; /* 5ms*/ outl(val, port); - + /* PM_SIDD*/ port = (PMLogic_BASE + 0x020); val = 0x08C02 ; /* 10ms*/ outl(val, port); - + /* GPIO24 OUT_AUX1 function is the external signal for 5535's * vsb_working_aux which is de-asserted when 5535 enters Standby (S3 or * S5) state. On Hawk, GPIO24 controls all voltage rails except Vmem @@ -154,7 +154,7 @@ static void pmChipsetInit(void) * Programming of GPIO11 will be done by VSA PM code. During VSA * Init. BIOS writes PM Core Virual Register indicating if S1 Clocks * should be On or Off. This is based on a Setup item. We do not want - * to leave GPIO11 enabled because of a Hawk board problem. With + * to leave GPIO11 enabled because of a Hawk board problem. With * GPIO11 enabled in S3, something is back-driving GPIO11 causing it * to float to 1.6-1.7V. */ @@ -188,7 +188,7 @@ static uint32_t FlashPort[] = { * ChipsetFlashSetup * * Flash LBARs need to be setup before VSA init so the PCI BARs have - * correct size info. Call this routine only if flash needs to be + * correct size info. Call this routine only if flash needs to be * configured (don't call it if you want IDE). * **************************************************************************/ @@ -240,16 +240,16 @@ static void ChipsetFlashSetup(void) } - + /**************************************************************************** - * + * * ChipsetGeodeLinkInit * * Handle chipset specific GeodeLink settings here. * Called from GeodeLink init code. - * + * ****************************************************************************/ -static void +static void ChipsetGeodeLinkInit(void) { msr_t msr; @@ -269,7 +269,7 @@ ChipsetGeodeLinkInit(void) return; totalmem = sizeram() << 20 - 1; - totalmem >>= 12; + totalmem >>= 12; totalmem = ~totalmem; totalmem &= 0xfffff; msr.lo = totalmem; @@ -292,7 +292,7 @@ gx2_chipsetinit (struct northbridge_amd_gx2_config *nb) printk(BIOS_DEBUG, "Companion is a %s\n", is_5536()?"CS5536":"CS5535"); #ifdef UNUSED_CODE - /* we hope NEVER to be in coreboot when S3 resumes + /* we hope NEVER to be in coreboot when S3 resumes if (! IsS3Resume()) */ { struct acpiinit *aci = acpi_init_table; @@ -319,14 +319,14 @@ gx2_chipsetinit (struct northbridge_amd_gx2_config *nb) msrnum = MSR_SB_USB2 + 8; wrmsr(msrnum, msr); } - + /* set hd IRQ */ outl (GPIOL_2_SET, GPIOL_INPUT_ENABLE); outl (GPIOL_2_SET, GPIOL_IN_AUX1_SELECT); /* Allow IO read and writes during a ATA DMA operation. */ /* This could be done in the HD rom but do it here for easier debugging. */ - + msrnum = ATA_SB_GLD_MSR_ERR; msr = rdmsr(msrnum); msr.lo &= ~0x100; |