diff options
Diffstat (limited to 'src/northbridge/intel/e7501/raminit.c')
-rw-r--r-- | src/northbridge/intel/e7501/raminit.c | 206 |
1 files changed, 98 insertions, 108 deletions
diff --git a/src/northbridge/intel/e7501/raminit.c b/src/northbridge/intel/e7501/raminit.c index 4695915763..ad6e462377 100644 --- a/src/northbridge/intel/e7501/raminit.c +++ b/src/northbridge/intel/e7501/raminit.c @@ -807,8 +807,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) //---------------------------------------------------------------------------------- // Function: do_ram_command -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard +// Parameters: // command - specifies the command to be sent to the DIMMs: // RAM_COMMAND_NOP - No Operation // RAM_COMMAND_PRECHARGE - Precharge all banks @@ -821,8 +820,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl) // Return Value: None // Description: Send the specified command to all DIMMs. // -static void do_ram_command(const struct mem_controller *ctrl, uint8_t command, - uint16_t jedec_mode_bits) +static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits) { int i; uint32_t dram_controller_mode; @@ -830,10 +828,10 @@ static void do_ram_command(const struct mem_controller *ctrl, uint8_t command, uint16_t e7501_mode_bits = jedec_mode_bits; // Configure the RAM command - dram_controller_mode = pci_read_config32(ctrl->d0, DRC); + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); dram_controller_mode &= 0xFFFFFF8F; dram_controller_mode |= command; - pci_write_config32(ctrl->d0, DRC, dram_controller_mode); + pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode); // RAM_COMMAND_NORMAL is an exception. // It affects only the memory controller and does not need to be "sent" to the DIMMs. @@ -865,7 +863,7 @@ static void do_ram_command(const struct mem_controller *ctrl, uint8_t command, for (i = 0; i < (MAX_NUM_CHANNELS * MAX_DIMM_SOCKETS_PER_CHANNEL); ++i) { - uint8_t dimm_end_64M_multiple = pci_read_config8(ctrl->d0, DRB_ROW_0 + i); + uint8_t dimm_end_64M_multiple = pci_read_config8(PCI_DEV(0, 0, 0), DRB_ROW_0 + i); if (dimm_end_64M_multiple > dimm_start_64M_multiple) { // This code assumes DRAM row boundaries are all set below 4 GB @@ -890,19 +888,17 @@ static void do_ram_command(const struct mem_controller *ctrl, uint8_t command, //---------------------------------------------------------------------------------- // Function: set_ram_mode -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// jedec_mode_bits - for mode register set & extended mode register set -// commands, bits 0-12 contain the register value in JEDEC format. +// Parameters: jedec_mode_bits - for mode register set & extended mode register set +// commands, bits 0-12 contain the register value in JEDEC format. // Return Value: None // Description: Set the mode register of all DIMMs. The proper CAS# latency // setting is added to the mode bits specified by the caller. // -static void set_ram_mode(const struct mem_controller *ctrl, uint16_t jedec_mode_bits) +static void set_ram_mode(uint16_t jedec_mode_bits) { ASSERT(!(jedec_mode_bits & SDRAM_CAS_MASK)); - uint32_t dram_cas_latency = pci_read_config32(ctrl->d0, DRT) & DRT_CAS_MASK; + uint32_t dram_cas_latency = pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK; switch (dram_cas_latency) { case DRT_CAS_2_5: @@ -918,7 +914,7 @@ static void set_ram_mode(const struct mem_controller *ctrl, uint16_t jedec_mode_ break; } - do_ram_command(ctrl, RAM_COMMAND_MRS, jedec_mode_bits); + do_ram_command(RAM_COMMAND_MRS, jedec_mode_bits); } /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ @@ -927,8 +923,7 @@ static void set_ram_mode(const struct mem_controller *ctrl, uint16_t jedec_mode_ //---------------------------------------------------------------------------------- // Function: configure_dimm_row_boundaries -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard +// Parameters: // dimm_log2_num_bits - log2(number of bits) for each side of the DIMM // total_dram_64M_multiple - total DRAM in the system (as a // multiple of 64 MB) for DIMMs < dimm_index @@ -938,7 +933,7 @@ static void set_ram_mode(const struct mem_controller *ctrl, uint16_t jedec_mode_ // Description: Configure the E7501's DRAM Row Boundary registers for the memory // present in the specified DIMM. // -static uint8_t configure_dimm_row_boundaries(const struct mem_controller *ctrl, +static uint8_t configure_dimm_row_boundaries( struct dimm_size dimm_log2_num_bits, uint8_t total_dram_64M_multiple, unsigned dimm_index) @@ -967,7 +962,7 @@ static uint8_t configure_dimm_row_boundaries(const struct mem_controller *ctrl, total_dram_64M_multiple += (1 << (dimm_log2_num_bits.side1 - 29)); // Configure the boundary address for the row on side 1 - pci_write_config8(ctrl->d0, DRB_ROW_0+(dimm_index<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0+(dimm_index<<1), total_dram_64M_multiple); // If the DIMMs are double-sided, add the capacity of side 2 this DIMM pair // (as a multiple of 64 MB) to the total capacity of the system @@ -975,14 +970,14 @@ static uint8_t configure_dimm_row_boundaries(const struct mem_controller *ctrl, total_dram_64M_multiple += (1 << (dimm_log2_num_bits.side2 - 29)); // Configure the boundary address for the row (if any) on side 2 - pci_write_config8(ctrl->d0, DRB_ROW_1+(dimm_index<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1+(dimm_index<<1), total_dram_64M_multiple); // Update boundaries for rows subsequent to these. // These settings will be overridden by a subsequent call if a populated physical slot exists for(i=dimm_index+1; i<MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { - pci_write_config8(ctrl->d0, DRB_ROW_0+(i<<1), total_dram_64M_multiple); - pci_write_config8(ctrl->d0, DRB_ROW_1+(i<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_0+(i<<1), total_dram_64M_multiple); + pci_write_config8(PCI_DEV(0, 0, 0), DRB_ROW_1+(i<<1), total_dram_64M_multiple); } return total_dram_64M_multiple; @@ -1008,8 +1003,8 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, // Configure the E7501's DRAM row boundaries // Start by zeroing out the temporary initial configuration - pci_write_config32(ctrl->d0, DRB_ROW_0, 0); - pci_write_config32(ctrl->d0, DRB_ROW_4, 0); + pci_write_config32(PCI_DEV(0, 0, 0), DRB_ROW_0, 0); + pci_write_config32(PCI_DEV(0, 0, 0), DRB_ROW_4, 0); for(i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { @@ -1030,7 +1025,7 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, if (sz.side1 == 0) die("Bad SPD value\r\n"); - total_dram_64M_multiple = configure_dimm_row_boundaries(ctrl, sz, total_dram_64M_multiple, i); + total_dram_64M_multiple = configure_dimm_row_boundaries(sz, total_dram_64M_multiple, i); } // Configure the Top Of Low Memory (TOLM) in the E7501 @@ -1064,7 +1059,7 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, // Convert to high 16 bits of address uint16_t top_of_low_memory = total_dram_128M_multiple << 11; - pci_write_config16(ctrl->d0, TOLM, top_of_low_memory); + pci_write_config16(PCI_DEV(0, 0, 0), TOLM, top_of_low_memory); } else { @@ -1076,7 +1071,7 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, // Put TOLM at 3 GB - pci_write_config16(ctrl->d0, TOLM, 0xc000); + pci_write_config16(PCI_DEV(0, 0, 0), TOLM, 0xc000); // Define a remap window to make the RAM that would appear from 3 GB - 4 GB // visible just beyond 4 GB or the end of physical memory, whichever is larger @@ -1089,25 +1084,24 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl, remap_limit = 0x40 + (total_dram_64M_multiple - 0x30) - 1; } - pci_write_config16(ctrl->d0, REMAPBASE, remap_base); - pci_write_config16(ctrl->d0, REMAPLIMIT, remap_limit); + pci_write_config16(PCI_DEV(0, 0, 0), REMAPBASE, remap_base); + pci_write_config16(PCI_DEV(0, 0, 0), REMAPLIMIT, remap_limit); } } //---------------------------------------------------------------------------------- // Function: initialize_ecc -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard +// Parameters: None // Return Value: None // Description: If we're configured to use ECC, initialize the SDRAM and // clear the E7501's ECC error flags. // -static void initialize_ecc(const struct mem_controller *ctrl) +static void initialize_ecc(void) { uint32_t dram_controller_mode; /* Test to see if ECC support is enabled */ - dram_controller_mode = pci_read_config32(ctrl->d0, DRC); + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); dram_controller_mode >>= 20; dram_controller_mode &= 3; if (dram_controller_mode == 2) { @@ -1116,28 +1110,28 @@ static void initialize_ecc(const struct mem_controller *ctrl) RAM_DEBUG_MESSAGE("Initializing ECC state...\r\n"); /* Initialize ECC bits , use ECC zero mode (new to 7501)*/ - pci_write_config8(ctrl->d0, MCHCFGNS, 0x06); - pci_write_config8(ctrl->d0, MCHCFGNS, 0x07); + pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x06); + pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x07); // Wait for scrub cycle to complete do { - byte = pci_read_config8(ctrl->d0, MCHCFGNS); + byte = pci_read_config8(PCI_DEV(0, 0, 0), MCHCFGNS); } while ( (byte & 0x08 ) == 0); - pci_write_config8(ctrl->d0, MCHCFGNS, byte & 0xfc); + pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, byte & 0xfc); RAM_DEBUG_MESSAGE("ECC state initialized.\r\n"); /* Clear the ECC error bits */ - pci_write_config8(ctrl->d0f1, DRAM_FERR, 0x03); - pci_write_config8(ctrl->d0f1, DRAM_NERR, 0x03); + pci_write_config8(PCI_DEV(0, 0, 1), DRAM_FERR, 0x03); + pci_write_config8(PCI_DEV(0, 0, 1), DRAM_NERR, 0x03); // Clear DRAM Interface error bits (write-one-clear) - pci_write_config32(ctrl->d0f1, FERR_GLOBAL, 1<<18); - pci_write_config32(ctrl->d0f1, NERR_GLOBAL, 1<<18); + pci_write_config32(PCI_DEV(0, 0, 1), FERR_GLOBAL, 1<<18); + pci_write_config32(PCI_DEV(0, 0, 1), NERR_GLOBAL, 1<<18); // Start normal ECC scrub - pci_write_config8(ctrl->d0, MCHCFGNS, 5); + pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 5); } } @@ -1161,7 +1155,7 @@ static void configure_e7501_dram_timing(const struct mem_controller *ctrl, uint8 uint8_t slowest_row_precharge = 0; uint8_t slowest_ras_cas_delay = 0; uint8_t slowest_active_to_precharge_delay = 0; - uint32_t current_cas_latency = pci_read_config32(ctrl->d0, DRT) & DRT_CAS_MASK; + uint32_t current_cas_latency = pci_read_config32(PCI_DEV(0, 0, 0), DRT) & DRT_CAS_MASK; // CAS# latency must be programmed beforehand ASSERT((current_cas_latency == DRT_CAS_2_0) || (current_cas_latency == DRT_CAS_2_5)); @@ -1200,7 +1194,7 @@ static void configure_e7501_dram_timing(const struct mem_controller *ctrl, uint8 // At 133 MHz, 1 clock == 7.52 ns /* Read the initial state */ - dram_timing = pci_read_config32(ctrl->d0, DRT); + dram_timing = pci_read_config32(PCI_DEV(0, 0, 0), DRT); /* Trp */ @@ -1260,7 +1254,7 @@ static void configure_e7501_dram_timing(const struct mem_controller *ctrl, uint8 if (current_cas_latency == DRT_CAS_2_0) dram_timing |= (1<<28); // 4 clocks - pci_write_config32(ctrl->d0, DRT, dram_timing); + pci_write_config32(PCI_DEV(0, 0, 0), DRT, dram_timing); return; @@ -1351,10 +1345,10 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl, uint8 * cas latency I can use. */ - dram_timing = pci_read_config32(ctrl->d0, DRT); + dram_timing = pci_read_config32(PCI_DEV(0, 0, 0), DRT); dram_timing &= ~(DRT_CAS_MASK); - maybe_dram_read_timing = pci_read_config16(ctrl->d0, MAYBE_DRDCTL); + maybe_dram_read_timing = pci_read_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL); maybe_dram_read_timing &= 0xF00C; if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_0) { @@ -1363,7 +1357,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl, uint8 } else if (system_compatible_cas_latencies & SPD_CAS_LATENCY_2_5) { - uint32_t dram_row_attributes = pci_read_config32(ctrl->d0, DRA); + uint32_t dram_row_attributes = pci_read_config32(PCI_DEV(0, 0, 0), DRA); dram_timing |= DRT_CAS_2_5; @@ -1384,24 +1378,24 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl, uint8 else die("No CAS# latencies compatible with all DIMMs!!\r\n"); - pci_write_config32(ctrl->d0, DRT, dram_timing); + pci_write_config32(PCI_DEV(0, 0, 0), DRT, dram_timing); /* set master DLL reset */ - dword = pci_read_config32(ctrl->d0, 0x88); + dword = pci_read_config32(PCI_DEV(0, 0, 0), 0x88); dword |= (1<<26); - pci_write_config32(ctrl->d0, 0x88, dword); + pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword); dword &= 0x0c0007ff; /* patch try register 88 is undocumented tnz */ dword |= 0xd2109800; - pci_write_config32(ctrl->d0, 0x88, dword); + pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword); - pci_write_config16(ctrl->d0, MAYBE_DRDCTL, maybe_dram_read_timing); + pci_write_config16(PCI_DEV(0, 0, 0), MAYBE_DRDCTL, maybe_dram_read_timing); - dword = pci_read_config32(ctrl->d0, 0x88); /* reset master DLL reset */ + dword = pci_read_config32(PCI_DEV(0, 0, 0), 0x88); /* reset master DLL reset */ dword &= ~(1<<26); - pci_write_config32(ctrl->d0, 0x88, dword); + pci_write_config32(PCI_DEV(0, 0, 0), 0x88, dword); return; @@ -1426,7 +1420,7 @@ static void configure_e7501_dram_controller_mode(const struct mem_controller *ct int i; // Initial settings - uint32_t controller_mode = pci_read_config32(ctrl->d0, DRC); + uint32_t controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); uint32_t system_refresh_mode = (controller_mode >> 8) & 7; // Code below assumes that most aggressive settings are in @@ -1507,7 +1501,7 @@ static void configure_e7501_dram_controller_mode(const struct mem_controller *ct controller_mode |= (system_refresh_mode << 8); // Configure the E7501 - pci_write_config32(ctrl->d0, DRC, controller_mode); + pci_write_config32(PCI_DEV(0, 0, 0), DRC, controller_mode); } //---------------------------------------------------------------------------------- @@ -1562,23 +1556,21 @@ static void configure_e7501_row_attributes(const struct mem_controller *ctrl, } /* Write the new row attributes register */ - pci_write_config32(ctrl->d0, DRA, row_attributes); + pci_write_config32(PCI_DEV(0, 0, 0), DRA, row_attributes); } //---------------------------------------------------------------------------------- // Function: enable_e7501_clocks -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard -// dimm_mask - bitmask of populated DIMMs on the board - see +// Parameters: dimm_mask - bitmask of populated DIMMs on the board - see // spd_get_supported_dimms() // Return Value: None // Description: Enable clock signals for populated DIMM sockets and disable them // for unpopulated sockets (to reduce EMI). // -static void enable_e7501_clocks(const struct mem_controller *ctrl, uint8_t dimm_mask) +static void enable_e7501_clocks(uint8_t dimm_mask) { int i; - uint8_t clock_disable = pci_read_config8(ctrl->d0, CKDIS); + uint8_t clock_disable = pci_read_config8(PCI_DEV(0, 0, 0), CKDIS); for (i = 0; i < MAX_DIMM_SOCKETS_PER_CHANNEL; i++) { @@ -1590,7 +1582,7 @@ static void enable_e7501_clocks(const struct mem_controller *ctrl, uint8_t dimm_ clock_disable |= socket_mask; // DIMM absent, disable clock } - pci_write_config8(ctrl->d0, CKDIS, clock_disable); + pci_write_config8(PCI_DEV(0, 0, 0), CKDIS, clock_disable); } @@ -1605,22 +1597,21 @@ static void enable_e7501_clocks(const struct mem_controller *ctrl, uint8_t dimm_ // Return Value: None // Description: DDR Receive FIFO RE-Sync (?) // -static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) +static void RAM_RESET_DDR_PTR(void) { uint8_t byte; - byte = pci_read_config8(ctrl->d0, 0x88); + byte = pci_read_config8(PCI_DEV(0, 0, 0), 0x88); byte |= (1 << 4); - pci_write_config8(ctrl->d0, 0x88, byte); + pci_write_config8(PCI_DEV(0, 0, 0), 0x88, byte); - byte = pci_read_config8(ctrl->d0, 0x88); + byte = pci_read_config8(PCI_DEV(0, 0, 0), 0x88); byte &= ~(1 << 4); - pci_write_config8(ctrl->d0, 0x88, byte); + pci_write_config8(PCI_DEV(0, 0, 0), 0x88, byte); } //---------------------------------------------------------------------------------- // Function: ram_set_d0f0_regs -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard +// Parameters: None // Return Value: None // Description: Set E7501 registers that are either independent of DIMM specifics, // or establish default settings that will be overridden when we @@ -1629,7 +1620,7 @@ static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) // on the table 'constant_register_values', which are a triple of // configuration register offset, mask, and bits to set. // -static void ram_set_d0f0_regs(const struct mem_controller *ctrl) +static void ram_set_d0f0_regs(void) { int i; int num_values = ARRAY_SIZE(constant_register_values); @@ -1651,11 +1642,11 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) // Again, not strictly an error, but flagged as a potential bug ASSERT((bits_to_mask & bits_to_set) == 0); - register_value = pci_read_config32(ctrl->d0, register_offset); + register_value = pci_read_config32(PCI_DEV(0, 0, 0), register_offset); register_value &= bits_to_mask; register_value |= bits_to_set; - pci_write_config32(ctrl->d0, register_offset, register_value); + pci_write_config32(PCI_DEV(0, 0, 0), register_offset, register_value); } } @@ -1678,8 +1669,7 @@ static void write_8dwords(uint32_t* src_addr, uint32_t dst_addr) //---------------------------------------------------------------------------------- // Function: ram_set_rcomp_regs -// Parameters: ctrl - PCI addresses of memory controller functions, and -// SMBus addresses of DIMM slots on the mainboard +// Parameters: None // Return Value: None // Description: Set the E7501's (undocumented) RCOMP registers. // Per the 855PM datasheet and IXP2800 HW Initialization Reference @@ -1688,7 +1678,7 @@ static void write_8dwords(uint32_t* src_addr, uint32_t dst_addr) // Comments below are conjecture based on apparent similarity // between the E7501 and these two chips. // -static void ram_set_rcomp_regs(const struct mem_controller *ctrl) +static void ram_set_rcomp_regs(void) { uint32_t dword; uint8_t maybe_strength_control; @@ -1696,13 +1686,13 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) RAM_DEBUG_MESSAGE("Setting RCOMP registers.\r\n"); /*enable access to the rcomp bar*/ - dword = pci_read_config32(ctrl->d0, MAYBE_MCHTST); + dword = pci_read_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST); dword |= (1<<22); - pci_write_config32(ctrl->d0, MAYBE_MCHTST, dword); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword); // Set the RCOMP MMIO base address - pci_write_config32(ctrl->d0, MAYBE_SMRBASE, RCOMP_MMIO); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_SMRBASE, RCOMP_MMIO); // Block RCOMP updates while we configure the registers dword = read32(RCOMP_MMIO + MAYBE_SMRCTL); @@ -1789,9 +1779,9 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) SLOW_DOWN_IO; /*disable access to the rcomp bar */ - dword = pci_read_config32(ctrl->d0, MAYBE_MCHTST); + dword = pci_read_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST); dword &= ~(1<<22); - pci_write_config32(ctrl->d0, MAYBE_MCHTST, dword); + pci_write_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST, dword); } @@ -1811,7 +1801,7 @@ static void ram_set_rcomp_regs(const struct mem_controller *ctrl) // static void sdram_enable(int controllers, const struct mem_controller *ctrl) { - uint8_t dimm_mask = pci_read_config16(ctrl->d0, SKPD); + uint8_t dimm_mask = pci_read_config16(PCI_DEV(0, 0, 0), SKPD); uint32_t dram_controller_mode; if (dimm_mask == 0) @@ -1828,23 +1818,23 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) /* 3. Apply NOP */ RAM_DEBUG_MESSAGE("Ram Enable 3\r\n"); - do_ram_command(ctrl, RAM_COMMAND_NOP, 0); + do_ram_command(RAM_COMMAND_NOP, 0); EXTRA_DELAY /* 4 Precharge all */ RAM_DEBUG_MESSAGE("Ram Enable 4\r\n"); - do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0); + do_ram_command(RAM_COMMAND_PRECHARGE, 0); EXTRA_DELAY /* wait until the all banks idle state... */ /* 5. Issue EMRS to enable DLL */ RAM_DEBUG_MESSAGE("Ram Enable 5\r\n"); - do_ram_command(ctrl, RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE | SDRAM_EXTMODE_DRIVE_NORMAL); + do_ram_command(RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE | SDRAM_EXTMODE_DRIVE_NORMAL); EXTRA_DELAY /* 6. Reset DLL */ RAM_DEBUG_MESSAGE("Ram Enable 6\r\n"); - set_ram_mode(ctrl, E7501_SDRAM_MODE | SDRAM_MODE_DLL_RESET); + set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_DLL_RESET); EXTRA_DELAY /* Ensure a 200us delay between the DLL reset in step 6 and the final @@ -1856,42 +1846,42 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) /* 7 Precharge all */ RAM_DEBUG_MESSAGE("Ram Enable 7\r\n"); - do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0); + do_ram_command(RAM_COMMAND_PRECHARGE, 0); EXTRA_DELAY /* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */ RAM_DEBUG_MESSAGE("Ram Enable 8\r\n"); - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY /* And for good luck 6 more CBRs */ - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY - do_ram_command(ctrl, RAM_COMMAND_CBR, 0); + do_ram_command(RAM_COMMAND_CBR, 0); EXTRA_DELAY /* 9 mode register set */ RAM_DEBUG_MESSAGE("Ram Enable 9\r\n"); - set_ram_mode(ctrl, E7501_SDRAM_MODE | SDRAM_MODE_NORMAL); + set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_NORMAL); EXTRA_DELAY /* 10 DDR Receive FIFO RE-Sync */ RAM_DEBUG_MESSAGE("Ram Enable 10\r\n"); - RAM_RESET_DDR_PTR(ctrl); + RAM_RESET_DDR_PTR(); EXTRA_DELAY /* 11 normal operation */ RAM_DEBUG_MESSAGE("Ram Enable 11\r\n"); - do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0); + do_ram_command(RAM_COMMAND_NORMAL, 0); EXTRA_DELAY // Reconfigure the row boundaries and Top of Low Memory @@ -1899,16 +1889,16 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) configure_e7501_ram_addresses(ctrl, dimm_mask); /* Finally enable refresh */ - dram_controller_mode = pci_read_config32(ctrl->d0, DRC); + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); dram_controller_mode |= (1 << 29); - pci_write_config32(ctrl->d0, DRC, dram_controller_mode); + pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode); EXTRA_DELAY - initialize_ecc(ctrl); + initialize_ecc(); - dram_controller_mode = pci_read_config32(ctrl->d0, DRC); /* FCS_EN */ + dram_controller_mode = pci_read_config32(PCI_DEV(0, 0, 0), DRC); /* FCS_EN */ dram_controller_mode |= (1<<17); // NOTE: undocumented reserved bit - pci_write_config32(ctrl->d0, DRC, dram_controller_mode); + pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode); RAM_DEBUG_MESSAGE("Northbridge following SDRAM init:\r\n"); DUMPNORTH(); @@ -1940,14 +1930,14 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) print_debug("No usable memory for this controller\r\n"); } else { - enable_e7501_clocks(ctrl, dimm_mask); + enable_e7501_clocks(dimm_mask); RAM_DEBUG_MESSAGE("setting based on SPD data...\r\n"); configure_e7501_row_attributes(ctrl, dimm_mask); configure_e7501_dram_controller_mode(ctrl, dimm_mask); configure_e7501_cas_latency(ctrl, dimm_mask); - RAM_RESET_DDR_PTR(ctrl); + RAM_RESET_DDR_PTR(); configure_e7501_dram_timing(ctrl, dimm_mask); DO_DELAY @@ -1963,7 +1953,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) // Save the dimm_mask for when sdram_enable is called, so it can call // configure_e7501_ram_addresses() without having to regenerate the bitmask // of usable DIMMs. - pci_write_config16(ctrl->d0, SKPD, dimm_mask); + pci_write_config16(PCI_DEV(0, 0, 0), SKPD, dimm_mask); } //---------------------------------------------------------------------------------- @@ -1979,8 +1969,8 @@ static void sdram_set_registers(const struct mem_controller *ctrl) RAM_DEBUG_MESSAGE("Northbridge prior to SDRAM init:\r\n"); DUMPNORTH(); - ram_set_rcomp_regs(ctrl); - ram_set_d0f0_regs(ctrl); + ram_set_rcomp_regs(); + ram_set_d0f0_regs(); } /*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/ |