summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/e7501
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/intel/e7501')
-rw-r--r--src/northbridge/intel/e7501/debug.c42
-rw-r--r--src/northbridge/intel/e7501/raminit.c64
2 files changed, 53 insertions, 53 deletions
diff --git a/src/northbridge/intel/e7501/debug.c b/src/northbridge/intel/e7501/debug.c
index c05059be99..e5d3ac8741 100644
--- a/src/northbridge/intel/e7501/debug.c
+++ b/src/northbridge/intel/e7501/debug.c
@@ -27,7 +27,7 @@ static void print_pci_devices(void)
continue;
}
print_debug_pci_dev(dev);
- print_debug("\r\n");
+ print_debug("\n");
}
}
@@ -40,9 +40,9 @@ static void dump_pci_device(unsigned dev)
unsigned char val;
if ((i & 0x0f) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "\r\n%02x:",i);
+ printk(BIOS_DEBUG, "\n%02x:",i);
#else
- print_debug("\r\n");
+ print_debug("\n");
print_debug_hex8(i);
print_debug_char(':');
#endif
@@ -55,7 +55,7 @@ static void dump_pci_device(unsigned dev)
print_debug_hex8(val);
#endif
}
- print_debug("\r\n");
+ print_debug("\n");
}
static void dump_pci_devices(void)
@@ -95,7 +95,7 @@ static void dump_pci_devices_on_bus(unsigned busn)
static void dump_spd_registers(const struct mem_controller *ctrl)
{
int i;
- print_debug("\r\n");
+ print_debug("\n");
for(i = 0; i < 4; i++) {
unsigned device;
device = ctrl->channel0[i];
@@ -114,9 +114,9 @@ static void dump_spd_registers(const struct mem_controller *ctrl)
unsigned char byte;
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "\r\n%02x: ", j);
+ printk(BIOS_DEBUG, "\n%02x: ", j);
#else
- print_debug("\r\n");
+ print_debug("\n");
print_debug_hex8(j);
print_debug(": ");
#endif
@@ -133,7 +133,7 @@ static void dump_spd_registers(const struct mem_controller *ctrl)
print_debug_char(' ');
#endif
}
- print_debug("\r\n");
+ print_debug("\n");
}
device = ctrl->channel1[i];
if (device) {
@@ -151,9 +151,9 @@ static void dump_spd_registers(const struct mem_controller *ctrl)
unsigned char byte;
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "\r\n%02x: ", j);
+ printk(BIOS_DEBUG, "\n%02x: ", j);
#else
- print_debug("\r\n");
+ print_debug("\n");
print_debug_hex8(j);
print_debug(": ");
#endif
@@ -170,14 +170,14 @@ static void dump_spd_registers(const struct mem_controller *ctrl)
print_debug_char(' ');
#endif
}
- print_debug("\r\n");
+ print_debug("\n");
}
}
}
static void dump_smbus_registers(void)
{
unsigned device;
- print_debug("\r\n");
+ print_debug("\n");
for(device = 1; device < 0x80; device++) {
int j;
if( smbus_read_byte(device, 0) < 0 ) continue;
@@ -196,9 +196,9 @@ static void dump_smbus_registers(void)
}
if ((j & 0xf) == 0) {
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "\r\n%02x: ",j);
+ printk(BIOS_DEBUG, "\n%02x: ",j);
#else
- print_debug("\r\n");
+ print_debug("\n");
print_debug_hex8(j);
print_debug(": ");
#endif
@@ -211,7 +211,7 @@ static void dump_smbus_registers(void)
print_debug_char(' ');
#endif
}
- print_debug("\r\n");
+ print_debug("\n");
}
}
@@ -220,10 +220,10 @@ static void dump_io_resources(unsigned port)
int i;
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "%04x:\r\n", port);
+ printk(BIOS_DEBUG, "%04x:\n", port);
#else
print_debug_hex16(port);
- print_debug(":\r\n");
+ print_debug(":\n");
#endif
for(i=0;i<256;i++) {
uint8_t val;
@@ -243,7 +243,7 @@ static void dump_io_resources(unsigned port)
print_debug_hex8(val);
#endif
if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
+ print_debug("\n");
}
port++;
}
@@ -256,9 +256,9 @@ static void dump_mem(unsigned start, unsigned end)
for(i=start;i<end;i++) {
if((i & 0xf)==0) {
#if CONFIG_USE_PRINTK_IN_CAR
- printk(BIOS_DEBUG, "\r\n%08x:", i);
+ printk(BIOS_DEBUG, "\n%08x:", i);
#else
- print_debug("\r\n");
+ print_debug("\n");
print_debug_hex32(i);
print_debug(":");
#endif
@@ -270,6 +270,6 @@ static void dump_mem(unsigned start, unsigned end)
print_debug_hex8((unsigned char)*((unsigned char *)i));
#endif
}
- print_debug("\r\n");
+ print_debug("\n");
}
#endif
diff --git a/src/northbridge/intel/e7501/raminit.c b/src/northbridge/intel/e7501/raminit.c
index c1866070ff..70a692cd92 100644
--- a/src/northbridge/intel/e7501/raminit.c
+++ b/src/northbridge/intel/e7501/raminit.c
@@ -35,7 +35,7 @@
#endif
#define E7501_SDRAM_MODE (SDRAM_BURST_INTERLEAVED | SDRAM_BURST_4)
-#define SPD_ERROR "Error reading SPD info\r\n"
+#define SPD_ERROR "Error reading SPD info\n"
// NOTE: This used to be 0x100000.
// That doesn't work on systems where A20M# is asserted, because
@@ -481,7 +481,7 @@ static void do_delay(void)
static void die_on_spd_error(int spd_return_value)
{
if (spd_return_value < 0)
- die("Error reading SPD info\r\n");
+ die("Error reading SPD info\n");
}
//----------------------------------------------------------------------------------
@@ -522,7 +522,7 @@ static struct dimm_size sdram_spd_get_page_size(uint16_t dimm_socket_address)
value = spd_read_byte(dimm_socket_address, SPD_NUM_DIMM_BANKS);
if (value < 0) goto hw_err;
if (value > 2)
- die("Bad SPD value\r\n");
+ die("Bad SPD value\n");
if (value == 2) {
pgsz.side2 = pgsz.side1; // Assume symmetric banks until we know differently
@@ -755,7 +755,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
spd_value = spd_read_byte(channel1_dimm, SPD_MODULE_ATTRIBUTES);
if (!(spd_value & MODULE_REGISTERED) || (spd_value < 0)) {
- print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\r\n");
+ print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n");
continue;
}
@@ -780,11 +780,11 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
dimm_mask |= ((1<<i) | (1<<(MAX_DIMM_SOCKETS_PER_CHANNEL + i)));
}
else
- print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\r\n");
+ print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n");
#else
switch (bDualChannel) {
case 0:
- print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\r\n");
+ print_debug("Skipping un-matched DIMMs - only dual-channel operation supported\n");
break;
default:
@@ -873,7 +873,7 @@ static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
RAM_DEBUG_MESSAGE(" Sending RAM command to 0x");
RAM_DEBUG_HEX32(dimm_start_address + e7501_mode_bits);
- RAM_DEBUG_MESSAGE("\r\n");
+ RAM_DEBUG_MESSAGE("\n");
read32(dimm_start_address + e7501_mode_bits);
// Set the start of the next DIMM
@@ -1017,10 +1017,10 @@ static void configure_e7501_ram_addresses(const struct mem_controller *ctrl,
RAM_DEBUG_HEX32(sz.side1);
RAM_DEBUG_MESSAGE(" ");
RAM_DEBUG_HEX32(sz.side2);
- RAM_DEBUG_MESSAGE("\r\n");
+ RAM_DEBUG_MESSAGE("\n");
if (sz.side1 == 0)
- die("Bad SPD value\r\n");
+ die("Bad SPD value\n");
total_dram_64M_multiple = configure_dimm_row_boundaries(sz, total_dram_64M_multiple, i);
}
@@ -1105,7 +1105,7 @@ static void initialize_ecc(void)
uint8_t byte;
- RAM_DEBUG_MESSAGE("Initializing ECC state...\r\n");
+ RAM_DEBUG_MESSAGE("Initializing ECC state...\n");
/* Initialize ECC bits , use ECC zero mode (new to 7501)*/
pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x06);
pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, 0x07);
@@ -1117,7 +1117,7 @@ static void initialize_ecc(void)
} while ( (byte & 0x08 ) == 0);
pci_write_config8(PCI_DEV(0, 0, 0), MCHCFGNS, byte & 0xfc);
- RAM_DEBUG_MESSAGE("ECC state initialized.\r\n");
+ RAM_DEBUG_MESSAGE("ECC state initialized.\n");
/* Clear the ECC error bits */
pci_write_config8(PCI_DEV(0, 0, 1), DRAM_FERR, 0x03);
@@ -1373,7 +1373,7 @@ static void configure_e7501_cas_latency(const struct mem_controller *ctrl, uint8
}
}
else
- die("No CAS# latencies compatible with all DIMMs!!\r\n");
+ die("No CAS# latencies compatible with all DIMMs!!\n");
pci_write_config32(PCI_DEV(0, 0, 0), DRT, dram_timing);
@@ -1462,14 +1462,14 @@ static void configure_e7501_dram_controller_mode(const struct mem_controller *ct
die_on_spd_error(value);
value &= 0x7f; // Mask off self-refresh bit
if(value > MAX_SPD_REFRESH_RATE) {
- print_err("unsupported refresh rate\r\n");
+ print_err("unsupported refresh rate\n");
continue;
}
// Get the appropriate E7501 refresh mode for this DIMM
dimm_refresh_mode = refresh_rate_map[value];
if (dimm_refresh_mode > 7) {
- print_err("unsupported refresh rate\r\n");
+ print_err("unsupported refresh rate\n");
continue;
}
@@ -1680,7 +1680,7 @@ static void ram_set_rcomp_regs(void)
uint32_t dword;
uint8_t maybe_strength_control;
- RAM_DEBUG_MESSAGE("Setting RCOMP registers.\r\n");
+ RAM_DEBUG_MESSAGE("Setting RCOMP registers.\n");
/*enable access to the rcomp bar*/
dword = pci_read_config32(PCI_DEV(0, 0, 0), MAYBE_MCHTST);
@@ -1805,8 +1805,8 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
return;
/* 1 & 2 Power up and start clocks */
- RAM_DEBUG_MESSAGE("Ram Enable 1\r\n");
- RAM_DEBUG_MESSAGE("Ram Enable 2\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 1\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 2\n");
/* A 200us delay is needed */
@@ -1814,23 +1814,23 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
EXTRA_DELAY
/* 3. Apply NOP */
- RAM_DEBUG_MESSAGE("Ram Enable 3\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 3\n");
do_ram_command(RAM_COMMAND_NOP, 0);
EXTRA_DELAY
/* 4 Precharge all */
- RAM_DEBUG_MESSAGE("Ram Enable 4\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 4\n");
do_ram_command(RAM_COMMAND_PRECHARGE, 0);
EXTRA_DELAY
/* wait until the all banks idle state... */
/* 5. Issue EMRS to enable DLL */
- RAM_DEBUG_MESSAGE("Ram Enable 5\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 5\n");
do_ram_command(RAM_COMMAND_EMRS, SDRAM_EXTMODE_DLL_ENABLE | SDRAM_EXTMODE_DRIVE_NORMAL);
EXTRA_DELAY
/* 6. Reset DLL */
- RAM_DEBUG_MESSAGE("Ram Enable 6\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 6\n");
set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_DLL_RESET);
EXTRA_DELAY
@@ -1842,12 +1842,12 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
EXTRA_DELAY
/* 7 Precharge all */
- RAM_DEBUG_MESSAGE("Ram Enable 7\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 7\n");
do_ram_command(RAM_COMMAND_PRECHARGE, 0);
EXTRA_DELAY
/* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */
- RAM_DEBUG_MESSAGE("Ram Enable 8\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 8\n");
do_ram_command(RAM_COMMAND_CBR, 0);
EXTRA_DELAY
do_ram_command(RAM_COMMAND_CBR, 0);
@@ -1867,17 +1867,17 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
EXTRA_DELAY
/* 9 mode register set */
- RAM_DEBUG_MESSAGE("Ram Enable 9\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 9\n");
set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_NORMAL);
EXTRA_DELAY
/* 10 DDR Receive FIFO RE-Sync */
- RAM_DEBUG_MESSAGE("Ram Enable 10\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 10\n");
RAM_RESET_DDR_PTR();
EXTRA_DELAY
/* 11 normal operation */
- RAM_DEBUG_MESSAGE("Ram Enable 11\r\n");
+ RAM_DEBUG_MESSAGE("Ram Enable 11\n");
do_ram_command(RAM_COMMAND_NORMAL, 0);
EXTRA_DELAY
@@ -1897,7 +1897,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
dram_controller_mode |= (1<<17); // NOTE: undocumented reserved bit
pci_write_config32(PCI_DEV(0, 0, 0), DRC, dram_controller_mode);
- RAM_DEBUG_MESSAGE("Northbridge following SDRAM init:\r\n");
+ RAM_DEBUG_MESSAGE("Northbridge following SDRAM init:\n");
DUMPNORTH();
// verify_ram();
@@ -1917,19 +1917,19 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
uint8_t dimm_mask;
- RAM_DEBUG_MESSAGE("Reading SPD data...\r\n");
+ RAM_DEBUG_MESSAGE("Reading SPD data...\n");
//activate_spd_rom(ctrl); Not necessary for this chipset
dimm_mask = spd_get_supported_dimms(ctrl);
if (dimm_mask == 0) {
- print_debug("No usable memory for this controller\r\n");
+ print_debug("No usable memory for this controller\n");
} else {
enable_e7501_clocks(dimm_mask);
- RAM_DEBUG_MESSAGE("setting based on SPD data...\r\n");
+ RAM_DEBUG_MESSAGE("setting based on SPD data...\n");
configure_e7501_row_attributes(ctrl, dimm_mask);
configure_e7501_dram_controller_mode(ctrl, dimm_mask);
@@ -1938,7 +1938,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
configure_e7501_dram_timing(ctrl, dimm_mask);
DO_DELAY
- RAM_DEBUG_MESSAGE("done\r\n");
+ RAM_DEBUG_MESSAGE("done\n");
}
// NOTE: configure_e7501_ram_addresses() is NOT called here.
@@ -1963,7 +1963,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
//
static void sdram_set_registers(const struct mem_controller *ctrl)
{
- RAM_DEBUG_MESSAGE("Northbridge prior to SDRAM init:\r\n");
+ RAM_DEBUG_MESSAGE("Northbridge prior to SDRAM init:\n");
DUMPNORTH();
ram_set_rcomp_regs();