diff options
Diffstat (limited to 'src/northbridge/intel/i440lx/raminit.c')
| -rw-r--r-- | src/northbridge/intel/i440lx/raminit.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/src/northbridge/intel/i440lx/raminit.c b/src/northbridge/intel/i440lx/raminit.c index 5d07441dde..6259608b48 100644 --- a/src/northbridge/intel/i440lx/raminit.c +++ b/src/northbridge/intel/i440lx/raminit.c @@ -171,7 +171,7 @@ static void do_ram_command(u32 command) PRINT_DEBUG_HEX16(reg16); PRINT_DEBUG(" to 0x"); PRINT_DEBUG_HEX32(addr); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); #endif read32(addr); @@ -201,7 +201,7 @@ static void spd_enable_refresh(void) PRINT_DEBUG("spd_enable_refresh: dramc = 0x"); PRINT_DEBUG_HEX8(reg); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); } /*----------------------------------------------------------------------------- @@ -225,7 +225,7 @@ static void northbridge_init(void) reg32 = pci_read_config32(NB, APBASE); PRINT_DEBUG("APBASE "); PRINT_DEBUG_HEX32(reg32); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); #endif } @@ -244,10 +244,10 @@ static void sdram_set_registers(void) #if 0 uint16_t reg16; reg16 = pci_read_config16(NB, PACCFG); - printk(BIOS_DEBUG, "i82443LX Host Freq: 6%C MHz\r\n", (reg16 & 0x4000) ? '0' : '6'); + printk(BIOS_DEBUG, "i82443LX Host Freq: 6%C MHz\n", (reg16 & 0x4000) ? '0' : '6'); #endif - PRINT_DEBUG("Northbridge prior to SDRAM init:\r\n"); + PRINT_DEBUG("Northbridge prior to SDRAM init:\n"); DUMPNORTH(); northbridge_init(); @@ -279,11 +279,11 @@ static void sdram_set_registers(void) } else { PRINT_DEBUG(" FAIL "); } - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); #endif } - PRINT_DEBUG("Northbridge atexit sdram set registers\r\n"); + PRINT_DEBUG("Northbridge atexit sdram set registers\n"); DUMPNORTH(); } @@ -342,7 +342,7 @@ static void sdram_set_spd_registers(void) */ PRINT_DEBUG_HEX16(ds); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); memsize += ds; @@ -363,7 +363,7 @@ static void sdram_set_spd_registers(void) PRINT_DEBUG(" "); PRINT_DEBUG_HEX16(ds); - PRINT_DEBUG("\r\n"); + PRINT_DEBUG("\n"); /* * modify DRT register if current row isn't empty @@ -384,7 +384,7 @@ static void sdram_set_spd_registers(void) #if 0 PRINT_DEBUG("Mem: 0x"); PRINT_DEBUG_HEX16(memsize * 8); - PRINT_DEBUG(" MB\r\n"); + PRINT_DEBUG(" MB\n"); if (memsize == 0) { /* maybe we should use some nice die/hlt sequence with printing on console @@ -392,8 +392,8 @@ static void sdram_set_spd_registers(void) * maybe such event_handler can be commonly defined routine to decrease * code duplication? */ - PRINT_DEBUG("No memory detected via SPD\r\n"); - PRINT_DEBUG("Reverting to hardcoded 64M single side dimm in first bank\r\n"); + PRINT_DEBUG("No memory detected via SPD\n"); + PRINT_DEBUG("Reverting to hardcoded 64M single side dimm in first bank\n"); } #endif @@ -418,38 +418,38 @@ static void sdram_enable(void) udelay(200); /* 1. Apply NOP. Wait 200 clock cycles (clock might be 60 or 66 Mhz). */ - PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n"); + PRINT_DEBUG("RAM Enable 1: Apply NOP\n"); do_ram_command(RAM_COMMAND_NOP); udelay(200); /* 2. Precharge all. Wait tRP. */ - PRINT_DEBUG("RAM Enable 2: Precharge all\r\n"); + PRINT_DEBUG("RAM Enable 2: Precharge all\n"); do_ram_command(RAM_COMMAND_PRECHARGE); udelay(1); /* 3. Perform 8 refresh cycles. Wait tRC each time. */ - PRINT_DEBUG("RAM Enable 3: CBR\r\n"); + PRINT_DEBUG("RAM Enable 3: CBR\n"); for (i = 0; i < 8; i++) { do_ram_command(RAM_COMMAND_CBR); udelay(1); } /* 4. Mode register set. Wait two memory cycles. */ - PRINT_DEBUG("RAM Enable 4: Mode register set\r\n"); + PRINT_DEBUG("RAM Enable 4: Mode register set\n"); do_ram_command(RAM_COMMAND_MRS); udelay(2); /* 5. Normal operation. */ - PRINT_DEBUG("RAM Enable 5: Normal operation\r\n"); + PRINT_DEBUG("RAM Enable 5: Normal operation\n"); do_ram_command(RAM_COMMAND_NORMAL); udelay(1); /* 6. Finally enable refresh. */ - PRINT_DEBUG("RAM Enable 6: Enable refresh\r\n"); + PRINT_DEBUG("RAM Enable 6: Enable refresh\n"); pci_write_config8(NB, DRAMC, 0x01); spd_enable_refresh(); udelay(1); - PRINT_DEBUG("Northbridge following SDRAM init:\r\n"); + PRINT_DEBUG("Northbridge following SDRAM init:\n"); } |