diff options
Diffstat (limited to 'src/northbridge/via/vx800/examples/romstage.c')
| -rw-r--r-- | src/northbridge/via/vx800/examples/romstage.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/src/northbridge/via/vx800/examples/romstage.c b/src/northbridge/via/vx800/examples/romstage.c index 80ee22c22a..22c0fbd40f 100644 --- a/src/northbridge/via/vx800/examples/romstage.c +++ b/src/northbridge/via/vx800/examples/romstage.c @@ -52,13 +52,13 @@ int acpi_is_wakeup_early_via_vx800(void) device_t dev; u16 tmp, result; - print_debug("In acpi_is_wakeup_early_via_vx800\r\n"); + print_debug("In acpi_is_wakeup_early_via_vx800\n"); /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_LPC), 0); if (dev == PCI_DEV_INVALID) - die("Power management controller not found\r\n"); + die("Power management controller not found\n"); /* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */ pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1); @@ -70,7 +70,7 @@ int acpi_is_wakeup_early_via_vx800(void) result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0; print_debug(" boot_mode="); print_debug_hex16(result); - print_debug("\r\n"); + print_debug("\n"); return result; } @@ -85,7 +85,7 @@ static void enable_mainboard_devices(void) device_t dev; uint16_t values; - print_debug("In enable_mainboard_devices \r\n"); + print_debug("In enable_mainboard_devices \n"); /* Enable P2P Bridge Header for External PCI BUS. @@ -375,14 +375,14 @@ g) Rx73h = 32h if (bist == 0) { // CAR need mtrr untill mem is ok, so i disable this early_mtrr_init(); - //print_debug("doing early_mtrr\r\n"); + //print_debug("doing early_mtrr\n"); //early_mtrr_init(); } /* Halt if there was a built-in self test failure. */ report_bist_failure(bist); - print_debug("Enabling mainboard devices\r\n"); + print_debug("Enabling mainboard devices\n"); enable_mainboard_devices(); u8 Data; @@ -392,7 +392,7 @@ g) Rx73h = 32h Data = pci_read_config8(device, 0xf6); print_debug("NB chip revision ="); print_debug_hex8(Data); - print_debug("\r\n"); + print_debug("\n"); /* make NB ready before draminit */ via_pci_inittable(Data, mNbStage1InitTbl); @@ -405,7 +405,7 @@ g) Rx73h = 32h u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; DRAM_SYS_ATTR DramAttr; - print_debug("This is a S3 wakeup\r\n"); + print_debug("This is a S3 wakeup\n"); memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR)); /*Step1 DRAM Detection; DDR1 or DDR2; Get SPD Data; Rank Presence;64 or 128bit; Unbuffered or registered; 1T or 2T */ @@ -429,7 +429,7 @@ g) Rx73h = 32h DRAMRegFinalValue(&DramAttr); // I just copy this function from draminit to here! SetUMARam(); // I just copy this function from draminit to here! - print_debug("Resume from S3, RAM init was ignored\r\n"); + print_debug("Resume from S3, RAM init was ignored\n"); } else { ddr2_ram_setup(); ram_check(0, 640 * 1024); @@ -528,7 +528,7 @@ g) Rx73h = 32h "rep movsd\n\t" ::"g"(memtop4) );*/ - print_debug("copy memory to high memory to protect s3 wakeup vector code \r\n"); //this can have function call, because no variable used before this + print_debug("copy memory to high memory to protect s3 wakeup vector code \n"); //this can have function call, because no variable used before this memcpy((unsigned char *) ((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - 0x100000), (unsigned char *) 0, 0xa0000); @@ -572,11 +572,11 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav __asm__ volatile ("movl %%esp, %0\n\t":"=a" (v_esp) ); #if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "v_esp=%08x\r\n", v_esp); + printk(BIOS_DEBUG, "v_esp=%08x\n", v_esp); #else print_debug("v_esp="); print_debug_hex32(v_esp); - print_debug("\r\n"); + print_debug("\n"); #endif } @@ -588,11 +588,11 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav //stack cpu_reset = 0; #if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "cpu_reset = %08x\r\n", cpu_reset); + printk(BIOS_DEBUG, "cpu_reset = %08x\n", cpu_reset); #else print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); - print_debug("\r\n"); + print_debug("\n"); #endif if (cpu_reset == 0) { @@ -635,16 +635,16 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav /* We can not go back any more, we lost old stack data in cache as ram */ if (new_cpu_reset == 0) { - print_debug("Use Ram as Stack now - done\r\n"); + print_debug("Use Ram as Stack now - done\n"); } else { - print_debug("Use Ram as Stack now - \r\n"); + print_debug("Use Ram as Stack now - \n"); } #if CONFIG_USE_PRINTK_IN_CAR - printk(BIOS_DEBUG, "new_cpu_reset = %08x\r\n", new_cpu_reset); + printk(BIOS_DEBUG, "new_cpu_reset = %08x\n", new_cpu_reset); #else print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); - print_debug("\r\n"); + print_debug("\n"); #endif /*copy and execute coreboot_ram */ copy_and_run(new_cpu_reset); @@ -653,6 +653,6 @@ So, I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c hav #endif - print_debug("should not be here -\r\n"); + print_debug("should not be here -\n"); } |