diff options
Diffstat (limited to 'src/northbridge/via/vx900/lpc.c')
-rw-r--r-- | src/northbridge/via/vx900/lpc.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/src/northbridge/via/vx900/lpc.c b/src/northbridge/via/vx900/lpc.c new file mode 100644 index 0000000000..ac5e4c840e --- /dev/null +++ b/src/northbridge/via/vx900/lpc.c @@ -0,0 +1,223 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012-2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <arch/io.h> +#include <arch/pirq_routing.h> +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/i8259.h> +#include <pc80/mc146818rtc.h> +#include <drivers/generic/ioapic/chip.h> + +#include "vx900.h" +#include "chip.h" + +/** + * @file lpc.c + * + * STATUS: + * We do a fair bit of setup, and most of it seems to work fairly well. There + * are still a few FIXME items here and there, but overall, this code hasn't + * been touched much from its initial 2012 version to 2013, when it was revived. + * + * We do the IOAPIC setup with the assumption that it is declared in the + * mainboard's devicetree.cb. We cannot use the IOAPIC however. The interrupts + * do not make it to the CPU. This issue is still under investigation. + * + * We also route PIRQs with CONFIG_PIRQ_ROUTE. This is currently the only way to + * get interrupts working. + * + * On the VX900, the keyboard can be connected directly to the chipset + * (referenced as "internal keyboard" in the documents). As long as that is the + * case (not connected to the superIO), and we disable the superIO keyboard LDN, + * it will work, but perhaps this should be more configurable. + */ + +static void vx900_lpc_misc_stuff(device_t dev) +{ + char extint; + u8 val; + struct northbridge_via_vx900_config *nb = (void *)dev->chip_info; + + /* GPIO 11,10 to SATALED [1,0] */ + pci_mod_config8(dev, 0xe4, 0, 1 << 0); + + /* Route the external interrupt line */ + extint = nb->ext_int_route_to_pirq; + if (extint < 'A' || extint > 'H') { + printk(BIOS_WARNING, "Invalid PIRQ%c for external interrupt\n", + extint); + } else { + printk(BIOS_INFO, "Routing external interrupt to PIRQ%c\n", + extint); + val = extint - 'A'; + val |= (1 << 3); /* bit3 enables the external int */ + pci_mod_config8(dev, 0x55, 0xf, val); + + } +} + +static void vx900_lpc_dma_setup(device_t dev) +{ + /* These are the steps recommended by VIA in order to get DMA running */ + + /* Enable Positive South Module PCI Cycle Decoding */ + /* FIXME: Setting this seems to hang our system */ + //pci_mod_config8(dev, 0x58, 0, 1<<4); + /* Positive decoding for ROM + APIC + On-board IO ports */ + pci_mod_config8(dev, 0x6c, 0, (1 << 2) | (1 << 3) | (1 << 7)); + /* Enable DMA channels. BIOS guide recommends DMA channel 2 off */ + pci_write_config8(dev, 0x53, 0xfb); + /* Disable PCI/DMA Memory Cycles Output to PCI Bus */ + pci_mod_config8(dev, 0x5b, (1 << 5), 0); + /* DMA bandwidth control - Improved bandwidth */ + pci_write_config8(dev, 0x53, 0xff); + /* ISA Positive Decoding control */ + pci_write_config8(dev, 0x6d, 0xdf); + pci_write_config8(dev, 0x6e, 0x98); + pci_write_config8(dev, 0x6f, 0x30); +} + +/** + *\brief VX900: Set up the south module IOAPIC (for the ISA/LPC bus) + * + * Enable the IOAPIC in the south module, and properly set it up. + * \n + * This is the hardware specific initialization for the IOAPIC, and complements + * the setup done by the generic IOAPIC driver. In order for the IOAPIC to work + * properly, it _must_ be declared in devicetree.cb . + * \n + * We are assuming this is called before the drivers/generic/ioapic code, + * which should be the case if devicetree.cb is set up properly. + */ +static void vx900_lpc_ioapic_setup(device_t dev) +{ + /* Find the IOAPIC, and make sure it's set up correctly in devicetree.cb + * If it's not, then the generic ioapic driver will not set it up + * correctly, and the MP table will not be correctly generated */ + device_t ioapic; + for (ioapic = dev->next; ioapic; ioapic = ioapic->next) { + if (ioapic->path.type == DEVICE_PATH_IOAPIC) + break; + } + + /* You did put an IOAPIC in devicetree.cb, didn't you? */ + if (ioapic == 0) { + /* We don't have enough info to set up the IOAPIC */ + printk(BIOS_ERR, "ERROR: South module IOAPIC not found. " + "Check your devicetree.cb\n"); + return; + } + + /* Found an IOAPIC, now we need to make sure it's the right one */ + ioapic_config_t *config = (ioapic_config_t *) ioapic->chip_info; + if (!config->have_isa_interrupts) { + /* Umh, is this the right IOAPIC ? */ + printk(BIOS_ERR, "ERROR: South module IOAPIC not carrying ISA " + "interrupts. Check your devicetree.cb\n"); + printk(BIOS_ERR, "Will not initialize this IOAPIC.\n"); + return; + } + + /* The base address of this IOAPIC _must_ be at 0xfec00000. + * Don't move this value to a #define, as people might think it's + * configurable. It is not. */ + const u32 base = config->base; + if (base != 0xfec00000) { + printk(BIOS_ERR, "ERROR: South module IOAPIC base should be at " + "0xfec00000\n but we found it at 0x%.8x\n", base); + return; + } + + print_debug("VX900 LPC: Setting up the south module IOAPIC.\n"); + /* Enable IOAPIC + * So much work for one line of code. Talk about bloat :) + * The 8259 PIC should still work even if the IOAPIC is enabled, so + * there's no crime in enabling the IOAPIC here. */ + pci_mod_config8(dev, 0x58, 0, 1 << 6); +} + +static void vx900_lpc_interrupt_stuff(device_t dev) +{ + /* Enable setting trigger mode through 0x4d0, and 0x4d1 ports + * And enable I/O recovery time */ + pci_mod_config8(dev, 0x40, 0, (1 << 2) | (1 << 6)); + /* Set serial IRQ frame width to 6 PCI cycles (recommended by VIA) + * And enable serial IRQ */ + pci_mod_config8(dev, 0x52, 3 << 0, (1 << 3) | (1 << 0)); + + /* Disable IRQ12 storm FIXME: bad comment */ + pci_mod_config8(dev, 0x51, (1 << 2), 0); + + pci_write_config8(dev, 0x4c, (1 << 6)); + + /* FIXME: Do we really need this? SeaBIOS/linux runs fine without it. + * Is this something the payload/OS should do, or is it safe for us to + * do it? */ + /* Get the IRQs up and running */ + setup_i8259(); + + vx900_lpc_dma_setup(dev); + + /* The IOAPIC is special, and we treat it separately */ + vx900_lpc_ioapic_setup(dev); +} + +static void vx900_lpc_init(device_t dev) +{ + vx900_lpc_interrupt_stuff(dev); + vx900_lpc_misc_stuff(dev); + dump_pci_device(dev); +} + +static struct device_operations vx900_lpc_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = vx900_lpc_init, + .scan_bus = scan_static_bus, +}; + +static const struct pci_driver lpc_driver __pci_driver = { + .ops = &vx900_lpc_ops, + .vendor = PCI_VENDOR_ID_VIA, + .device = PCI_DEVICE_ID_VIA_VX900_LPC, +}; + +#if CONFIG_PIRQ_ROUTE +void pirq_assign_irqs(const u8 * pirq) +{ + device_t lpc; + + lpc = dev_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VX900_LPC, 0); + + /* Take care of INTA -> INTD */ + pci_mod_config8(lpc, 0x55, (0xf << 4), pirq[0] << 4); + pci_write_config8(lpc, 0x56, pirq[1] | (pirq[2] << 4)); + pci_write_config8(lpc, 0x57, pirq[3] << 4); + + /* Enable INTE -> INTH to be on separate IRQs */ + pci_mod_config8(lpc, 0x46, 0, 1 << 4); + /* Now do INTE -> INTH */ + pci_write_config8(lpc, 0x44, pirq[4] | (pirq[5] << 4)); + pci_write_config8(lpc, 0x45, pirq[6] | (pirq[7] << 4)); +} +#endif |