summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/gx2/Config.lb2
-rw-r--r--src/northbridge/amd/gx2/chipsetinit.c298
-rw-r--r--src/northbridge/amd/gx2/northbridge.c3
3 files changed, 302 insertions, 1 deletions
diff --git a/src/northbridge/amd/gx2/Config.lb b/src/northbridge/amd/gx2/Config.lb
index 5848dbdcf9..567b5a939b 100644
--- a/src/northbridge/amd/gx2/Config.lb
+++ b/src/northbridge/amd/gx2/Config.lb
@@ -1,4 +1,4 @@
config chip.h
object northbridge.o
object northbridgeinit.o
-
+object chipsetinit.o
diff --git a/src/northbridge/amd/gx2/chipsetinit.c b/src/northbridge/amd/gx2/chipsetinit.c
new file mode 100644
index 0000000000..3d1f6ce4c1
--- /dev/null
+++ b/src/northbridge/amd/gx2/chipsetinit.c
@@ -0,0 +1,298 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+#include "northbridge.h"
+#include <cpu/amd/gx2def.h>
+#include <cpu/x86/msr.h>
+#include <cpu/x86/cache.h>
+
+
+/* the structs in this file only set msr.lo. But ... that may not always be true */
+
+struct msrinit {
+ unsigned long msrnum;
+ msr_t msr;
+};
+
+/* Master Configuration Register for Bus Masters.*/
+struct msrinit SB_MASTER_CONF_TABLE[] = {
+ {USB1_SB_GLD_MSR_CONF, {.hi=0,.lo=0x00008f000}}, /* NOTE: Must be 1st entry in table*/
+ {USB2_SB_GLD_MSR_CONF, {.hi=0,.lo=0x00008f000}},
+ {ATA_SB_GLD_MSR_CONF, {.hi=0,.lo=0x00048f000}},
+ {AC97_SB_GLD_MSR_CONF, {.hi=0,.lo=0x00008f000}},
+ {MDD_SB_GLD_MSR_CONF, {.hi=0,.lo=0x00000f000}},
+/* GLPCI_SB_GLD_MSR_CONF, 0x0FFFFFFFF*/
+/* GLCP_SB_GLD_MSR_CONF, 0x0FFFFFFFF*/
+/* GLIU_SB_GLD_MSR_CONF, 0x0*/
+ {0,{0,0}}
+};
+
+/* 5535_A3 Clock Gating*/
+struct msrinit CS5535_CLOCK_GATING_TABLE[] = {
+ { USB1_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { USB2_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { GLIU_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000004}},
+ { GLPCI_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { GLCP_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000004}},
+ { MDD_SB_GLD_MSR_PM, {.hi=0,.lo=0x050554111}},
+ { ATA_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { AC97_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ {0,{0,0}}
+};
+
+/* 5536 Clock Gating*/
+struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
+/* MSR Setting*/
+ { GLIU_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000004}},
+ { GLPCI_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { GLCP_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000004}},
+ { MDD_SB_GLD_MSR_PM, {.hi=0,.lo=0x050554111}}, /* SMBus clock gating errata (PBZ 2226 & SiBZ 3977)*/
+ { ATA_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ { AC97_SB_GLD_MSR_PM, {.hi=0,.lo=0x000000005}},
+ {0,{0,0}}
+};
+
+struct acpiinit {
+ unsigned short ioreg;
+ unsigned long regdata;
+ unsigned short iolen;
+};
+
+struct acpiinit acpi_init_table[] = {
+ {ACPI_BASE+0x00, 0x01000000, 4},
+ {ACPI_BASE+0x08, 0, 4},
+ {ACPI_BASE+0x0C, 0, 4},
+ {ACPI_BASE+0x1C, 0, 4},
+ {ACPI_BASE+0x18, 0x0FFFFFFFF, 4},
+ {ACPI_BASE+0x00, 0x0000FFFF, 4},
+
+ {PM_SCLK, 0x000000E00, 4},
+ {PM_SED, 0x000004601, 4},
+ {PM_SIDD, 0x000008C02, 4},
+ {PM_WKD, 0x0000000A0, 4},
+ {PM_WKXD, 0x0000000A0, 4},
+ {0,0,0}
+};
+
+/* return 1 if we are a 5536-based system */
+static int is_5536(void){
+ msr_t msr;
+ msr = rdmsr(GLIU_SB_GLD_MSR_CAP);
+ msr.lo >>= 20;
+ printk_debug("is_5536: msr.lo is 0x%x(==5 means 5536)\n", msr.lo&0xf);
+ return ((msr.lo&0xf) == 5);
+}
+/* ***************************************************************************/
+/* **/
+/* * pmChipsetInit*/
+/* **/
+/* * Program ACPI LBAR and initialize ACPI registers.*/
+/* * */
+/* **/
+/* * Entry:*/
+/* * None*/
+/* **/
+/* * Exit:*/
+/* * None*/
+/* **/
+/* * Destroys:*/
+/* * None*/
+/* **/
+/* ***************************************************************************/
+static void
+pmChipsetInit(void) {
+ unsigned long val = 0;
+ unsigned short port;
+
+ port = (PMLogic_BASE + 0x010);
+ val = 0x0E00 ; /* 1ms*/
+ outl(val, port);
+
+ /* PM_WKXD*/
+ /* Make sure bits[3:0]=0000b to clear the*/
+ /* saved Sx state*/
+ port = (PMLogic_BASE + 0x034);
+ val = 0x0A0 ; /* 5ms*/
+ outl(val, port);
+
+ /* PM_WKD*/
+ port = (PMLogic_BASE + 0x030);
+ outl(val, port);
+
+ /* PM_SED*/
+ port = (PMLogic_BASE + 0x014);
+/* mov eax, 0x057642 ; 100ms, works*/
+ val = 0x04601 ; /* 5ms*/
+ outl(val, port);
+
+ /* PM_SIDD*/
+ port = (PMLogic_BASE + 0x020);
+/* mov eax, 0x0AEC84 ; 200ms, works*/
+ val = 0x08C02 ; /* 10ms*/
+ outl(val, port);
+
+ /* GPIO24 OUT_AUX1 function is the external signal for 5535's vsb_working_aux*/
+ /* which is de-asserted when 5535 enters Standby(S3 or S5) state.*/
+ /* On Hawk, GPIO24 controls all voltage rails except Vmem and Vstandby. This means*/
+ /* GX2 will be fully de-powered if this control de-asserts in S3/S5.*/
+ /* */
+ /* GPIO24 is setup in preChipsetInit for two reasons*/
+ /* 1. GPIO24 at reset defaults to disabled, since this signal is vsb_work_aux on*/
+ /* Hawk it controls the FET's for all voltage rails except Vstanby & Vmem.*/
+ /* BIOS needs to enable GPIO24 as OUT_AUX1 & OUTPUT_EN early so it is driven*/
+ /* by 5535.*/
+ /* 2. Non-PM builds will require GPIO24 enabled for instant-off power button*/
+ /* */
+
+ /* GPIO11 OUT_AUX1 function is the external signal for 5535's slp_clk_n which is asserted*/
+ /* when 5535 enters Sleep(S1) state.*/
+ /* On Hawk, GPIO11 is connected to control input of external clock generator*/
+ /* for 14MHz, PCI, USB & LPC clocks.*/
+ /* Programming of GPIO11 will be done by VSA PM code. During VSA Init. BIOS writes*/
+ /* PM Core Virual Register indicating if S1 Clocks should be On or Off. This is based*/
+ /* on a Setup item. We do not want to leave GPIO11 enabled because of a Hawk board*/
+ /* problem. With GPIO11 enabled in S3, something is back-driving GPIO11 causing it to*/
+ /* float to 1.6-1.7V.*/
+
+}
+
+
+/* ***************************************************************************/
+/* **/
+/* * ChipsetGeodeLinkInit*/
+/* * Handle chipset specific GeodeLink settings here. */
+/* * Called from GeodeLink init code.*/
+/* **/
+/* * Entry:*/
+/* * Exit:*/
+/* * Destroys: GS*/
+/* **/
+/* ***************************************************************************/
+static void
+ChipsetGeodeLinkInit(void){
+ msr_t msr;
+ unsigned long msrnum;
+ unsigned long totalmem;
+
+ if (is_5536())
+ return;
+ /* SWASIF for A1 DMA */
+ /* Set all memory to "just above systop" PCI so DMA will work*/
+ /* check A1*/
+ msrnum = MSR_SB_GLCP + 0x17;
+ msr = rdmsr(msrnum);
+ if ((msr.lo&0xff) == 0x11)
+ return;
+
+ totalmem = sizeram() << 20 - 1;
+ totalmem >>= 12;
+ totalmem = ~totalmem;
+ totalmem &= 0xfffff;
+ msr.lo = totalmem;
+ msr.hi = 0x20000000; /* Port 1 (PCI)*/
+ msrnum = MSR_SB_GLIU + 0x20; /* */;
+ wrmsr(msrnum, msr);
+}
+
+void
+chipsetinit (void){
+ msr_t msr;
+ struct msrinit *csi;
+ int i;
+ unsigned long msrnum;
+
+ outb( P80_CHIPSET_INIT, 0x80);
+ ChipsetGeodeLinkInit();
+
+ /* we hope NEVER to be in linuxbios when S3 resumes
+ if (! IsS3Resume()) */
+ {
+ struct acpiinit *aci = acpi_init_table;
+ while (aci->ioreg){
+ if (aci->iolen == 2) {
+ outw(aci->regdata, aci->ioreg);
+ inw(aci->ioreg);
+ } else {
+ outl(aci->regdata, aci->ioreg);
+ inl(aci->ioreg);
+ }
+ }
+
+ pmChipsetInit();
+ }
+
+ /* for later ... if 5536 set_usb_20(); */
+
+ /* Setup USB. Need more details. #118.18*/
+ msrnum = MSR_SB_USB1 + 8;
+ msr.lo = 0x00012090;
+ msr.hi = 0;
+ wrmsr(msrnum, msr);
+ msrnum = MSR_SB_USB2 + 8;
+ wrmsr(msrnum, msr);
+
+ /* set hd IRQ */
+ outl (GPIOL_2_SET, GPIOL_INPUT_ENABLE);
+ outl (GPIOL_2_SET, GPIOL_IN_AUX1_SELECT);
+
+ /* Allow IO read and writes during a ATA DMA operation.*/
+ /* This could be done in the HD rom but do it here for easier debugging.*/
+
+ msrnum = ATA_SB_GLD_MSR_ERR;
+ msr = rdmsr(msrnum);
+ msr.lo &= ~0x100;
+ wrmsr(msrnum, msr);
+
+/* Enable Post Primary IDE.*/
+ msrnum = GLPCI_SB_CTRL;
+ msr = rdmsr(msrnum);
+ msr.lo |= GLPCI_CRTL_PPIDE_SET;
+ wrmsr(msrnum, msr);
+
+
+ /* Set up Master Configuration Register*/
+ /* If 5536, use same master config settings as 5535, except for OHCI MSRs*/
+ if (is_5536())
+ i = 2;
+ else
+ i = 0;
+
+ csi = &SB_MASTER_CONF_TABLE[i];
+ for(; csi->msrnum; csi++){
+ msr.lo = csi->msr.lo;
+ msr.hi = csi->msr.hi;
+ wrmsr(csi->msrnum, msr);
+ }
+
+
+ /* Flash Setup*/
+ printk_err("NOT DOING ChipsetFlashSetup()!!!!!!!!!!!!!!!!!!\n");
+// ChipsetFlashSetup();
+
+
+
+ /* */
+ /* Set up Hardware Clock Gating*/
+ /* */
+ /* if (getnvram(TOKEN_SB_CLK_GATE) != TVALUE_DISABLE) */
+ {
+ if (is_5536())
+ csi = CS5536_CLOCK_GATING_TABLE;
+ else
+ csi = CS5535_CLOCK_GATING_TABLE;
+
+ for(; csi->msrnum; csi++){
+ msr.lo = csi->msr.lo;
+ msr.hi = csi->msr.hi;
+ wrmsr(csi->msrnum, msr);
+ }
+ }
+
+}
diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c
index 85c38229aa..af3fe7873f 100644
--- a/src/northbridge/amd/gx2/northbridge.c
+++ b/src/northbridge/amd/gx2/northbridge.c
@@ -414,6 +414,8 @@ static struct device_operations cpu_bus_ops = {
.scan_bus = 0,
};
+void chipsetInit (void);
+
static void enable_dev(struct device *dev)
{
printk_debug("gx2 north: enable_dev\n");
@@ -423,6 +425,7 @@ static void enable_dev(struct device *dev)
printk_debug("DEVICE_PATH_PCI_DOMAIN\n");
/* cpubug MUST be called before setup_gx2(), so we force the issue here */
cpubug();
+ chipsetinit();
setup_gx2();
/* do this here for now -- this chip really breaks our device model */
setup_realmode_idt();