summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/gx2/northbridgeinit.c4
-rw-r--r--src/northbridge/amd/gx2/pll_reset.c139
2 files changed, 141 insertions, 2 deletions
diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c
index c89e4cb845..724b4de4c4 100644
--- a/src/northbridge/amd/gx2/northbridgeinit.c
+++ b/src/northbridge/amd/gx2/northbridgeinit.c
@@ -102,8 +102,8 @@ struct msrinit GeodeLinkPriorityTable [] = {
{0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END*/
};
-/* do we have dmi or not? assume yes */
-int havedmi = 1;
+/* do we have dmi or not? assume NO per AMD */
+int havedmi = 0;
static void
writeglmsr(struct gliutable *gl){
diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c
index 504658576d..2437647c59 100644
--- a/src/northbridge/amd/gx2/pll_reset.c
+++ b/src/northbridge/amd/gx2/pll_reset.c
@@ -110,6 +110,144 @@ static unsigned int get_memory_speed(void)
}
#endif
+#define USE_GOODRICH_VERSION 1
+
+#if USE_GOODRICH_VERSION
+///////////////////////////////////////////////////////////////////////////////
+// Goodrich Version of pll_reset
+#define POST_CODE(x) outb(0x80, x)
+
+// PLLCHECK_COMPLETED is the "we've already done this" flag
+#define PLLCHECK_COMPLETED (1 << RSTPLL_LOWER_SWFLAGS_SHIFT)
+
+#ifndef RSTPPL_LOWER_BYPASS_SET
+#define RSTPPL_LOWER_BYPASS_SET (1 << GLCP_SYS_RSTPLL_BYPASS)
+#endif // RSTPPL_LOWER_BYPASS_SET
+
+#define DEFAULT_MDIV 3
+#define DEFAULT_VDIV 2
+#define DEFAULT_FBDIV 24 // 400/266 018 ;300/200
+
+static void pll_reset(void)
+{
+ msr_t msrGlcpSysRstpll;
+ unsigned MDIV_VDIV_FBDIV;
+ unsigned SyncBits; // store the sync bits in up ebx
+
+ // clear the Bypass bit
+
+ // If the straps say we are in bypass and the syspll is not AND there are no software
+ // bits set then FS2 or something set up the PLL and we should not change it.
+
+ msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL);
+ msrGlcpSysRstpll.lo &= ~RSTPPL_LOWER_BYPASS_SET;
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ // If the "we've already been here" flag is set, don't reconfigure the pll
+ if ( !(msrGlcpSysRstpll.lo & PLLCHECK_COMPLETED ) )
+ { // we haven't configured the PLL; do it now
+
+ // Store PCI33(0)/66(1), SDR(0)/DDR(1), and CRT(0)/TFT(1) in upper esi to get to the
+ // correct Strap Table.
+ POST_CODE(POST_PLL_INIT);
+
+ // configure for DDR
+ msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ // Use Manual settings
+ // UseManual:
+ POST_CODE(POST_PLL_MANUAL);
+
+ // DIV settings manually entered.
+ // ax = VDIV, upper eax = MDIV, upper ecx = FbDIV
+ // use gs and fs since we don't need them.
+
+ // ProgramClocks:
+ // ax = VDIV, upper eax = MDIV, upper ecx = FbDIV
+ // move everything into ebx
+ // VDIV
+ MDIV_VDIV_FBDIV = ((DEFAULT_VDIV - 2) << RSTPLL_UPPER_VDIV_SHIFT);
+
+ // MDIV
+ MDIV_VDIV_FBDIV |= ((DEFAULT_MDIV - 2) << RSTPLL_UPPER_MDIV_SHIFT);
+
+ // FbDIV
+ MDIV_VDIV_FBDIV |= (plldiv2fbdiv[DEFAULT_FBDIV] << RSTPLL_UPPER_FBDIV_SHIFT);
+
+ // write GLCP_SYS_RSTPPL (GLCP reg 0x14) with clock values
+ msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ msrGlcpSysRstpll.hi = MDIV_VDIV_FBDIV;
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ // Set Reset, LockWait, and SW flag
+ // DoReset:
+
+ // CheckSemiSync proc
+ // Check for Semi-Sync in GeodeLink and CPU.
+ // We need to do this here since the strap settings don't account for these bits.
+ SyncBits = 0; // store the sync bits in up ebx
+
+ // Check for Bypass mode.
+ if (msrGlcpSysRstpll.lo & RSTPPL_LOWER_BYPASS_SET)
+ {
+ // If we are in BYPASS PCI may or may not be sync'd but CPU and GeodeLink will.
+ SyncBits |= RSTPPL_LOWER_CPU_SEMI_SYNC_SET;
+ }
+ else
+ {
+ // CheckPCIsync:
+ // If FBdiv/Mdiv is evenly divisible then set the PCI semi-sync. FB is always greater
+ // look up the real divider... if we get a 0 we have serious problems
+ if ( !(fbdiv2plldiv[((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_FBDIV_SHIFT) & 0x3f)] %
+ (((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_MDIV_SHIFT) & 0x0F) + 2)) )
+ {
+ SyncBits |= RSTPPL_LOWER_PCI_SEMI_SYNC_SET;
+ }
+
+ // CheckCPUSync:
+ // If Vdiv/Mdiv is evenly divisible then set the CPU semi-sync.
+ // CPU is always greater or equal.
+ if (!((((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_MDIV_SHIFT) & 0x07) + 2) %
+ (((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_VDIV_SHIFT) & 0x0F) + 2)))
+ {
+ SyncBits |= RSTPPL_LOWER_CPU_SEMI_SYNC_SET;
+ }
+ }
+
+
+ // SetSync:
+ msrGlcpSysRstpll.lo &= ~(RSTPPL_LOWER_PCI_SEMI_SYNC_SET | RSTPPL_LOWER_CPU_SEMI_SYNC_SET);
+ msrGlcpSysRstpll.lo |= SyncBits;
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+ // CheckSemiSync endp
+
+ // now we do the reset
+ // Set hold count to 99 (063h)
+ msrGlcpSysRstpll.lo &= ~(0x0FF << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
+ msrGlcpSysRstpll.lo |= (0x0DE << RSTPPL_LOWER_HOLD_COUNT_SHIFT);
+ msrGlcpSysRstpll.lo |= PLLCHECK_COMPLETED; // Say we are done
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ // Don't want to use LOCKWAIT
+ msrGlcpSysRstpll.lo |= (RSTPPL_LOWER_PLL_RESET_SET + RSTPPL_LOWER_PD_SET);
+ msrGlcpSysRstpll.lo |= RSTPPL_LOWER_CHIP_RESET_SET;
+ wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
+
+ // You should never get here..... The chip has reset.
+ POST_CODE(POST_PLL_RESET_FAIL);
+ while (1);
+
+ } // we haven't configured the PLL; do it now
+
+}
+// End of Goodrich version of pll_reset
+///////////////////////////////////////////////////////////////////////////////
+
+#else // #if USE_GOODRICH_VERSION
+
static void pll_reset(void)
{
msr_t msr;
@@ -179,3 +317,4 @@ static void pll_reset(void)
print_debug("should not be here\n\r");
}
+#endif // #if USE_GOODRICH_VERSION