summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdk8/incoherent_ht.c191
1 files changed, 135 insertions, 56 deletions
diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c
index 0f87459244..2623935ab2 100644
--- a/src/northbridge/amd/amdk8/incoherent_ht.c
+++ b/src/northbridge/amd/amdk8/incoherent_ht.c
@@ -1,8 +1,11 @@
/*
- This should be done by Eric
- 2004.12 yhlu add multi ht chain dynamically support
- 2005.11 yhlu add let real sb to use small unitid
-*/
+ * incoherent hypertransport enumeration
+ * originally written by Eric Biederman
+ *
+ * 2004.12 yhlu add multi ht chain dynamically support
+ * 2005.11 yhlu add let real sb to use small unitid
+ * 2006.03 stepan cleanups
+ */
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <device/hypertransport_def.h>
@@ -19,7 +22,10 @@
#define K8_ALLOCATE_IO_RANGE 0
#endif
-// Do we need allocate MMIO? Current We direct last 64M to sblink only, We can not lose access to last 4M range to ROM
+/* Do we need to allocate MMIO? Currently we direct the last 64M
+ * to the southbridge link only. We have to remain access to the
+ * 4G-4M range for the southbridge (Flash ROM)
+ */
#ifndef K8_ALLOCATE_MMIO_RANGE
#define K8_ALLOCATE_MMIO_RANGE 0
#endif
@@ -49,7 +55,9 @@ static uint8_t ht_lookup_capability(device_t dev, uint16_t val)
if (pos > PCI_CAP_LIST_NEXT) {
pos = pci_read_config8(dev, pos);
}
- while(pos != 0) { /* loop through the linked list */
+
+ /* loop through the linked list */
+ while(pos != 0) {
uint8_t cap;
cap = pci_read_config8(dev, pos + PCI_CAP_LIST_ID);
if (cap == PCI_CAP_ID_HT) {
@@ -81,7 +89,7 @@ static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid
device_t dev;
uint32_t id;
- //actually, only for one HT device HT chain, and unitid is 0
+ // actually, only for one HT device HT chain, and unitid is 0
#if HT_CHAIN_UNITID_BASE == 0
if(offset_unitid) {
return;
@@ -260,22 +268,33 @@ static int ht_optimize_link(
return needs_reset;
}
+
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
#if RAMINIT_SYSINFO == 1
-static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo);
+static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus,
+ unsigned offset_unitid, struct sys_info *sysinfo);
+
static int scan_pci_bus( unsigned bus , struct sys_info *sysinfo)
#else
-static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid);
+static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus,
+ unsigned offset_unitid);
+
static int scan_pci_bus( unsigned bus)
#endif
{
- /*
- here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7)
- So We can scan these devices to find out if they are bridge
- If it is pci bridge, We need to set busn in bridge, and go on
- For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus
- */
+ /* Here we already can access PCI_DEV(bus, 0, 0) to
+ * PCI_DEV(bus, 0x1f, 0x7).
+ *
+ * So scan these devices to find out whether there are more bridges.
+ *
+ * - If we find a pci bridge, set the bus number in the bridge, and
+ * continue with the next device.
+ *
+ * - For hypertransport bridges, set the bus number in the bridge and
+ * call ht_setup_chainx(), and scan_pci_bus()
+ *
+ */
unsigned int devfn;
unsigned new_bus;
unsigned max_bus;
@@ -337,12 +356,18 @@ static int scan_pci_bus( unsigned bus)
((unsigned int) max_bus << 16));
pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
- /* here we need to figure out if dev is a ht bridge
- if it is ht bridge, we need to call ht_setup_chainx at first
- Not verified --- yhlu
- */
- uint8_t upos;
- upos = ht_lookup_host_capability(dev); // one func one ht sub
+ /* Here we need to figure out if dev is a ht
+ * bridge. If it is, we need to call
+ * ht_setup_chainx() first
+ *
+ * Not verified --- yhlu
+ */
+
+ uint8_t upos; // is this valid C?
+
+ // one func one ht sub
+ upos = ht_lookup_host_capability(dev);
+
if (upos) { // sub ht chain
uint8_t busn;
busn = (new_bus & 0xff);
@@ -380,6 +405,7 @@ static int scan_pci_bus( unsigned bus)
* time probing another function.
* Skip to next device.
*/
+
if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80))
{
devfn += 0x07;
@@ -396,7 +422,9 @@ static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned o
static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid)
#endif
{
- //even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
+ // execute this function even with HT_CHAIN_UNITID_BASE == 0,
+ // because of the end_of_chain check, and we need it to
+ // optimize the links
uint8_t next_unitid, last_unitid;
unsigned uoffs;
@@ -406,7 +434,8 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
#endif
#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE
- //let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+ // record the device id of last ht device, so we can set the
+ // unit id to HT_CHAIN_END_UNITID_BASE
unsigned real_last_unitid;
uint8_t real_last_pos;
int ht_dev_num = 0;
@@ -490,15 +519,17 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
next_unitid += count;
- /* Find which side of the ht link we are on,
- * by reading which direction our last write to PCI_CAP_FLAGS
- * came from.
+ /* Find which side of the ht link we are on, by reading
+ * which direction our last write to PCI_CAP_FLAGS came
+ * from.
*/
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
#if RAMINIT_SYSINFO == 1
- /* store the link pair here and we will Setup the Hypertransport link later, after we get final FID/VID */
+ /* store the link pair here and we will setup the
+ * Hypertransport link later, after we get final FID/VID
+ */
{
struct link_pair_st *link_pair = &sysinfo->link_pair[sysinfo->link_pair_num];
link_pair->udev = udev;
@@ -513,7 +544,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs);
#endif
- /* Remeber the location of the last device */
+ /* Remember the location of the last device */
udev = dev;
upos = pos;
uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS;
@@ -555,6 +586,8 @@ end_of_chain: ;
}
+
+
#if RAMINIT_SYSINFO == 1
static void ht_setup_chain(device_t udev, unsigned upos, struct sys_info *sysinfo)
#else
@@ -585,7 +618,10 @@ static int ht_setup_chain(device_t udev, unsigned upos)
return ht_setup_chainx(udev, upos, 0, offset_unitid);
#endif
}
-static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val)
+
+
+static int optimize_link_read_pointer(uint8_t node, uint8_t linkn,
+ uint8_t linkt, uint8_t val)
{
uint32_t dword, dword_old;
uint8_t link_type;
@@ -596,7 +632,8 @@ static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt
dword_old = dword = pci_read_config32(PCI_DEV(0,0x18+node,3), 0xdc);
- if ( (link_type & 7) == linkt ) { /* Coherent Link only linkt = 3, ncoherent = 7*/
+ /* coherent link only linkt = 3, non coherent = 7*/
+ if ( (link_type & 7) == linkt ) {
dword &= ~( 0xff<<(linkn *8) );
dword |= val << (linkn *8);
}
@@ -650,11 +687,12 @@ static void ht_setup_chains(uint8_t ht_c_num, struct sys_info *sysinfo)
static int ht_setup_chains(uint8_t ht_c_num)
#endif
{
- /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
- * On most boards this just happens. If a cpu has multiple
- * non Coherent links the appropriate bus registers for the
+ /* Assumption: The HT chain that is bus 0 has the HT I/O Hub on it.
+ * On most boards this just happens. If a cpu has multiple
+ * non coherent links the appropriate bus registers for the
* links needs to be programed to point at bus 0.
*/
+
uint8_t upos;
device_t udev;
uint8_t i;
@@ -679,9 +717,14 @@ static int ht_setup_chains(uint8_t ht_c_num)
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
- //We need setup 0x94, 0xb4, and 0xd4 according to the reg
- devpos = ((reg & 0xf0)>>4)+0x18; // nodeid; it will decide 0x18 or 0x19
- regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94; // link n; it will decide 0x94 or 0xb4, 0x0xd4;
+ // We need to setup 0x94, 0xb4, and 0xd4 according to reg
+
+ // nodeid; it will decide 0x18 or 0x19
+ devpos = ((reg & 0xf0)>>4)+0x18;
+
+ // link n; it will decide 0x94 or 0xb4, 0x0xd4;
+ regpos = ((reg & 0xf00)>>8) * 0x20 + 0x94;
+
busn = (reg & 0xff0000)>>16;
dword = pci_read_config32( PCI_DEV(0, devpos, 0), regpos) ;
@@ -710,12 +753,15 @@ static int ht_setup_chains(uint8_t ht_c_num)
#endif
#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
- /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */
+ /* You can not use use this in romcc, because recursive
+ * function calls in romcc will kill you
+ */
bus = busn; // we need 32 bit
#if RAMINIT_SYSINFO == 1
scan_pci_bus(bus, sysinfo);
#else
- reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword
+ // take out reset_needed that is stored in upword
+ reset_needed |= (scan_pci_bus(bus)>>16);
#endif
#endif
}
@@ -764,7 +810,8 @@ static int ht_setup_chains_x(void)
tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24);
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
- next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/
+ /* 0 will be used ht chain with SB we need to keep SB in bus 0 in auto stage */
+ next_busn=0x3f+1;
#if K8_ALLOCATE_IO_RANGE == 1
/* io range allocation */
@@ -789,38 +836,67 @@ static int ht_setup_chains_x(void)
dev = PCI_DEV(0, 0x18+nodeid,0);
for(linkn = 0; linkn<3; linkn++) {
unsigned regpos;
+
regpos = 0x98 + 0x20 * linkn;
reg = pci_read_config32(dev, regpos);
- if ((reg & 0x17) != 7) continue; /* it is not non conherent or not connected*/
- print_linkn_in("NC node|link=", ((nodeid & 0xf)<<4)|(linkn & 0xf));
+
+ /* skip if link is non conherent or not connected*/
+ if ((reg & 0x17) != 7) continue;
+
+ print_linkn_in("NC node|link=",
+ ((nodeid & 0xf)<<4)|(linkn & 0xf));
+
tempreg = 3 | (nodeid <<4) | (linkn<<8);
- /*compare (temp & 0xffff), with (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff) */
+
+ /* compare (temp & 0xffff) with
+ * (PCI(0, 0x18, 1) 0xe0 to 0xec & 0xfffff)
+ */
for(ht_c_num=0;ht_c_num<4; ht_c_num++) {
- reg = pci_read_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4);
- if(((reg & 0xffff) == (tempreg & 0xffff)) || ((reg & 0xffff) == 0x0000)) { /*we got it*/
+ reg = pci_read_config32( PCI_DEV(0, 0x18, 1),
+ 0xe0 + ht_c_num * 4);
+
+ if ( ((reg & 0xffff) == (tempreg & 0xffff))
+ || ((reg & 0xffff) == 0x0000) ) {
+ /*we got it*/
break;
}
}
- if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/
- /*update to 0xe0...*/
- if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */
+
+ /* used up the maximum allowed 4 non conherent links */
+ if(ht_c_num == 4) break;
+
+ /* update to 0xe0...*/
+ if((reg & 0xf) == 3) continue; /* SbLink so don't touch it */
+
print_linkn_in("\tbusn=", next_busn);
+
tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24);
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg);
+ pci_write_config32(PCI_DEV(0, 0x18, 1),
+ 0xe0 + ht_c_num * 4, tempreg);
+
next_busn+=0x3f+1;
#if K8_ALLOCATE_IO_RANGE == 1
/* io range allocation */
- tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg);
- tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12); //base :ISA and VGA ?
- pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg);
+
+ // limit
+ tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12);
+ pci_write_config32( PCI_DEV(0, 0x18, 1),
+ 0xC4 + ht_c_num * 8, tempreg);
+
+ // base :ISA and VGA ?
+ tempreg = 3 /*| ( 3<<4)*/ | (next_io_base<<12);
+ pci_write_config32(PCI_DEV(0, 0x18, 1),
+ 0xC0 + ht_c_num * 8, tempreg);
+
next_io_base += 0x3+0x1;
#endif
-
}
}
- /*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/
+
+ /* update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1)
+ * to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);
+ */
for(nodeid = 1; nodeid<nodes; nodeid++) {
int i;
@@ -871,7 +947,7 @@ static int ht_setup_chains_x(void)
#if RAMINIT_SYSINFO == 1
static int optimize_link_incoherent_ht(struct sys_info *sysinfo)
{
- // We need to use recorded link pair info to optimize the link
+ // We need to use the recorded link pair info to optimize the link
int i;
int reset_needed = 0;
@@ -879,7 +955,9 @@ static int optimize_link_incoherent_ht(struct sys_info *sysinfo)
for(i=0; i< link_pair_num; i++) {
struct link_pair_st *link_pair= &sysinfo->link_pair[i];
- reset_needed |= ht_optimize_link(link_pair->udev, link_pair->upos, link_pair->uoffs, link_pair->dev, link_pair->pos, link_pair->offs);
+ reset_needed |= ht_optimize_link(link_pair->udev,
+ link_pair->upos, link_pair->uoffs,
+ link_pair->dev, link_pair->pos, link_pair->offs);
}
reset_needed |= optimize_link_read_pointers(sysinfo->ht_c_num);
@@ -901,6 +979,7 @@ static unsigned get_sblnk(void)
/* Look up a which bus a given node/link combination is on.
* return 0 when we can't find the answer.
*/
+
static unsigned node_link_to_bus(unsigned node, unsigned link)
{
unsigned reg;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 09:31:42 +0000