summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/intel/e7505/raminit.c18
1 files changed, 2 insertions, 16 deletions
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c
index 517ba6f44c..72f630d2a3 100644
--- a/src/northbridge/intel/e7505/raminit.c
+++ b/src/northbridge/intel/e7505/raminit.c
@@ -48,11 +48,6 @@
Definitions:
-----------------------------------------------------------------------------*/
-// Uncomment this to enable run-time checking of DIMM parameters
-// for dual-channel operation
-// Unfortunately the code seems to chew up several K of space.
-//#define VALIDATE_DIMM_COMPATIBILITY
-
#if CONFIG(DEBUG_RAM_SETUP)
#define RAM_DEBUG_MESSAGE(x) printk(BIOS_DEBUG, x)
#define RAM_DEBUG_HEX32(x) printk(BIOS_DEBUG, "%08x", x)
@@ -115,7 +110,6 @@ static const uint32_t refresh_rate_map[] = {
#define MAX_SPD_REFRESH_RATE ((sizeof(refresh_rate_map) / sizeof(uint32_t)) - 1)
-#ifdef VALIDATE_DIMM_COMPATIBILITY
// SPD parameters that must match for dual-channel operation
static const uint8_t dual_channel_parameters[] = {
SPD_MEMORY_TYPE,
@@ -126,7 +120,6 @@ static const uint8_t dual_channel_parameters[] = {
SPD_PRIMARY_SDRAM_WIDTH,
SPD_NUM_BANKS_PER_SDRAM
};
-#endif /* VALIDATE_DIMM_COMPATIBILITY */
/* Comments here are remains of e7501 or even 855PM.
* They might be partially (in)correct for e7505.
@@ -465,8 +458,6 @@ static struct dimm_size spd_get_dimm_size(unsigned int dimm_socket_address)
return sz;
}
-#ifdef VALIDATE_DIMM_COMPATIBILITY
-
/**
* Determine whether two DIMMs have the same value for an SPD parameter.
*
@@ -490,7 +481,6 @@ static uint8_t are_spd_values_equal(uint8_t spd_byte_number,
return bEqual;
}
-#endif
/**
* Scan for compatible DIMMs.
@@ -527,10 +517,8 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
uint16_t channel0_dimm = ctrl->channel0[i];
uint16_t channel1_dimm = ctrl->channel1[i];
uint8_t bDualChannel = 1;
-#ifdef VALIDATE_DIMM_COMPATIBILITY
struct dimm_size page_size;
struct dimm_size sdram_width;
-#endif
int spd_value;
if (channel0_dimm == 0)
@@ -540,7 +528,6 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
SPD_MEMORY_TYPE_SDRAM_DDR)
continue;
-#ifdef VALIDATE_DIMM_COMPATIBILITY
if (smbus_read_byte(channel0_dimm, SPD_MODULE_VOLTAGE) !=
SPD_VOLTAGE_SSTL2)
continue; // Unsupported voltage
@@ -586,7 +573,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
&& (sdram_width.side2 != 8))
continue;
}
-#endif
+
// Channel 0 DIMM looks compatible.
// Now see if it is paired with the proper DIMM on channel 1.
@@ -599,7 +586,7 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
printk(BIOS_DEBUG, "Skipping un-matched DIMMs - only dual-channel operation supported\n");
continue;
}
-#ifdef VALIDATE_DIMM_COMPATIBILITY
+
spd_value = smbus_read_byte(channel1_dimm,
SPD_SUPPORTED_BURST_LENGTHS);
if (!(spd_value & SPD_BURST_LENGTH_4) || (spd_value < 0))
@@ -615,7 +602,6 @@ static uint8_t spd_get_supported_dimms(const struct mem_controller *ctrl)
break;
}
}
-#endif /* VALIDATE_DIMM_COMPATIBILITY */
if (bDualChannel) {
// This DIMM pair is usable