diff options
Diffstat (limited to 'src/northbridge')
| -rw-r--r-- | src/northbridge/intel/sandybridge/raminit_common.h | 5 | ||||
| -rw-r--r-- | src/northbridge/intel/sandybridge/raminit_ivy.c | 31 |
2 files changed, 18 insertions, 18 deletions
diff --git a/src/northbridge/intel/sandybridge/raminit_common.h b/src/northbridge/intel/sandybridge/raminit_common.h index 43bdd340dd..d966c51dfc 100644 --- a/src/northbridge/intel/sandybridge/raminit_common.h +++ b/src/northbridge/intel/sandybridge/raminit_common.h @@ -33,7 +33,7 @@ /* * WARNING: Do not forget to increase MRC_CACHE_VERSION when the saved data is changed! */ -#define MRC_CACHE_VERSION 2 +#define MRC_CACHE_VERSION 3 typedef struct odtmap_st { u16 rttwr; @@ -78,6 +78,9 @@ typedef struct ramctr_timing_st { /* DDR base_freq = 100 Mhz / 133 Mhz */ u8 base_freq; + /* Frequency index */ + u32 FRQ; + u16 cas_supported; /* Latencies are in units of ns, scaled by x256 */ u32 tCK; diff --git a/src/northbridge/intel/sandybridge/raminit_ivy.c b/src/northbridge/intel/sandybridge/raminit_ivy.c index fa636565a2..6484139a94 100644 --- a/src/northbridge/intel/sandybridge/raminit_ivy.c +++ b/src/northbridge/intel/sandybridge/raminit_ivy.c @@ -203,6 +203,9 @@ static void find_cas_tck(ramctr_timing *ctrl) } } + /* Frequency multiplier */ + ctrl->FRQ = get_FRQ(ctrl->tCK, ctrl->base_freq); + printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", NS2MHZ_DIV256 / ctrl->tCK); printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val); ctrl->CAS = val; @@ -363,16 +366,14 @@ static void dram_timing(ramctr_timing *ctrl) ctrl->tRFC = DIV_ROUND_UP(ctrl->tRFC, ctrl->tCK); printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC); - const u32 FRQ = get_FRQ(ctrl->tCK, ctrl->base_freq); - - ctrl->tREFI = get_REFI(FRQ, ctrl->base_freq); - ctrl->tMOD = get_MOD(FRQ, ctrl->base_freq); - ctrl->tXSOffset = get_XSOffset(FRQ, ctrl->base_freq); - ctrl->tWLO = get_WLO(FRQ, ctrl->base_freq); - ctrl->tCKE = get_CKE(FRQ, ctrl->base_freq); - ctrl->tXPDLL = get_XPDLL(FRQ, ctrl->base_freq); - ctrl->tXP = get_XP(FRQ, ctrl->base_freq); - ctrl->tAONPD = get_AONPD(FRQ, ctrl->base_freq); + ctrl->tREFI = get_REFI(ctrl->FRQ, ctrl->base_freq); + ctrl->tMOD = get_MOD(ctrl->FRQ, ctrl->base_freq); + ctrl->tXSOffset = get_XSOffset(ctrl->FRQ, ctrl->base_freq); + ctrl->tWLO = get_WLO(ctrl->FRQ, ctrl->base_freq); + ctrl->tCKE = get_CKE(ctrl->FRQ, ctrl->base_freq); + ctrl->tXPDLL = get_XPDLL(ctrl->FRQ, ctrl->base_freq); + ctrl->tXP = get_XP(ctrl->FRQ, ctrl->base_freq); + ctrl->tAONPD = get_AONPD(ctrl->FRQ, ctrl->base_freq); } static void dram_freq(ramctr_timing *ctrl) @@ -391,9 +392,6 @@ static void dram_freq(ramctr_timing *ctrl) /* Step 1 - Set target PCU frequency */ find_cas_tck(ctrl); - /* Frequency multiplier */ - const u32 FRQ = get_FRQ(ctrl->tCK, ctrl->base_freq); - /* * The PLL will never lock if the required frequency is already set. * Exit early to prevent a system hang. @@ -404,7 +402,7 @@ static void dram_freq(ramctr_timing *ctrl) return; /* Step 2 - Select frequency in the MCU */ - reg1 = FRQ; + reg1 = ctrl->FRQ; if (ctrl->base_freq == 100) reg1 |= 0x100; /* Enable 100Mhz REF clock */ @@ -422,7 +420,7 @@ static void dram_freq(ramctr_timing *ctrl) /* Step 3 - Verify lock frequency */ reg1 = MCHBAR32(MC_BIOS_DATA); val2 = (u8) reg1; - if (val2 >= FRQ) { + if (val2 >= ctrl->FRQ) { printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n", (1000 << 8) / ctrl->tCK); return; @@ -434,7 +432,6 @@ static void dram_freq(ramctr_timing *ctrl) static void dram_ioregs(ramctr_timing *ctrl) { - const u32 FRQ = get_FRQ(ctrl->tCK, ctrl->base_freq); u32 reg; int channel; @@ -462,7 +459,7 @@ static void dram_ioregs(ramctr_timing *ctrl) printram("done\n"); /* Set COMP2 */ - MCHBAR32(CRCOMPOFST2) = get_COMP2(FRQ, ctrl->base_freq); + MCHBAR32(CRCOMPOFST2) = get_COMP2(ctrl->FRQ, ctrl->base_freq); printram("COMP2 done\n"); /* Set COMP1 */ |