diff options
Diffstat (limited to 'src/soc/amd/common/block/include')
-rw-r--r-- | src/soc/amd/common/block/include/amdblocks/gpio_banks.h | 240 | ||||
-rw-r--r-- | src/soc/amd/common/block/include/amdblocks/gpio_defs.h | 248 |
2 files changed, 249 insertions, 239 deletions
diff --git a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h index b6162d7e7f..6524d05a54 100644 --- a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h +++ b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h @@ -4,6 +4,7 @@ #define AMD_BLOCK_GPIO_BANKS_H #include <types.h> +#include "gpio_defs.h" struct soc_amd_gpio { uint8_t gpio; @@ -17,13 +18,6 @@ struct soc_amd_event { uint8_t event; }; -#define GPIO_MASTER_SWITCH 0xFC -#define GPIO_MASK_STS_EN BIT(28) -#define GPIO_INTERRUPT_EN BIT(30) -#define GPIO_WAKE_EN BIT(31) - -#define GPIO_WAKE_STAT_0 0x2F0 -#define GPIO_WAKE_STAT_1 0x2F4 struct gpio_wake_state { uint32_t control_switch; uint32_t wake_stat[2]; @@ -38,59 +32,6 @@ void gpio_fill_wake_state(struct gpio_wake_state *state); /* Add gpio events to the eventlog. */ void gpio_add_events(const struct gpio_wake_state *state); -#define GPIO_PIN_IN (1 << 0) /* for byte access */ -#define GPIO_PIN_OUT (1 << 6) /* for byte access */ - -/* Pad trigger type - Level or Edge */ -#define GPIO_TRIGGER_EDGE (0 << 8) -#define GPIO_TRIGGER_LEVEL (1 << 8) -#define GPIO_TRIGGER_MASK (1 << 8) - -/* - * Pad polarity: - * Level trigger - High or Low - * Edge trigger - High (Rising), Low (Falling), Both - */ -#define GPIO_ACTIVE_HIGH (0 << 9) -#define GPIO_ACTIVE_LOW (1 << 9) -#define GPIO_ACTIVE_BOTH (2 << 9) -#define GPIO_ACTIVE_MASK (3 << 9) - -/* - * Pad trigger and polarity configuration. - * This determines the filtering applied on the input signal at the pad. - */ -#define GPIO_TRIGGER_EDGE_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_EDGE) -#define GPIO_TRIGGER_EDGE_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_EDGE) -#define GPIO_TRIGGER_BOTH_EDGES (GPIO_ACTIVE_BOTH | GPIO_TRIGGER_EDGE) -#define GPIO_TRIGGER_LEVEL_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_LEVEL) -#define GPIO_TRIGGER_LEVEL_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_LEVEL) - -#define GPIO_INT_ENABLE_STATUS (1 << 11) -#define GPIO_INT_ENABLE_DELIVERY (1 << 12) -#define GPIO_INT_ENABLE_STATUS_DELIVERY \ - (GPIO_INT_ENABLE_STATUS | GPIO_INT_ENABLE_DELIVERY) -#define GPIO_INT_ENABLE_MASK (3 << 11) - -#define GPIO_S0I3_WAKE_EN (1 << 13) -#define GPIO_S3_WAKE_EN (1 << 14) -#define GPIO_S4_S5_WAKE_EN (1 << 15) - -#define GPIO_PIN_STS (1 << 16) -#define GPIO_8KPULLUP_SELECT (1 << 19) -#define GPIO_PULLUP_ENABLE (1 << 20) -#define GPIO_PULLDOWN_ENABLE (1 << 21) -#define GPIO_PULL_MASK (7 << 19) - -#define GPIO_OUTPUT_SHIFT 22 -#define GPIO_OUTPUT_VALUE (1 << GPIO_OUTPUT_SHIFT) -#define GPIO_OUTPUT_ENABLE (1 << 23) -#define GPIO_OUTPUT_MASK (3 << GPIO_OUTPUT_SHIFT) - -#define GPIO_INT_STATUS (1 << 28) -#define GPIO_WAKE_STATUS (1 << 29) -#define GPIO_STATUS_MASK (3 << 28) - enum { GEVENT_0, GEVENT_1, @@ -126,39 +67,6 @@ enum { GEVENT_31, }; -#define GPIO_OUTPUT_OUT_HIGH (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE) -#define GPIO_OUTPUT_OUT_LOW GPIO_OUTPUT_ENABLE - -#define GPIO_PULL_PULL_UP_8K (GPIO_PULLUP_ENABLE | GPIO_8KPULLUP_SELECT) -#define GPIO_PULL_PULL_UP GPIO_PULLUP_ENABLE -#define GPIO_PULL_PULL_DOWN GPIO_PULLDOWN_ENABLE -#define GPIO_PULL_PULL_NONE 0 - -#define AMD_GPIO_MUX_MASK 0x03 - -/* - * Flags used for GPIO configuration. These provide additional information that does not go - * directly into GPIO control register. These are stored in `flags` field in soc_amd_gpio. - */ -#define GPIO_FLAG_EVENT_TRIGGER_LEVEL (1 << 0) -#define GPIO_FLAG_EVENT_TRIGGER_EDGE (0 << 0) -#define GPIO_FLAG_EVENT_TRIGGER_MASK (1 << 0) -#define GPIO_FLAG_EVENT_ACTIVE_HIGH (1 << 1) -#define GPIO_FLAG_EVENT_ACTIVE_LOW (0 << 1) -#define GPIO_FLAG_EVENT_ACTIVE_MASK (1 << 1) -#define GPIO_FLAG_SCI (1 << 2) -#define GPIO_FLAG_SMI (1 << 3) - -/* Trigger configuration for GPIO SCI/SMI events. */ -#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_HIGH (GPIO_FLAG_EVENT_TRIGGER_LEVEL | \ - GPIO_FLAG_EVENT_ACTIVE_HIGH) -#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_LOW (GPIO_FLAG_EVENT_TRIGGER_LEVEL | \ - GPIO_FLAG_EVENT_ACTIVE_LOW) -#define GPIO_FLAG_EVENT_TRIGGER_EDGE_HIGH (GPIO_FLAG_EVENT_TRIGGER_EDGE | \ - GPIO_FLAG_EVENT_ACTIVE_HIGH) -#define GPIO_FLAG_EVENT_TRIGGER_EDGE_LOW (GPIO_FLAG_EVENT_TRIGGER_EDGE | \ - GPIO_FLAG_EVENT_ACTIVE_LOW) - static inline bool is_gpio_event_level_triggered(uint32_t flags) { return (flags & GPIO_FLAG_EVENT_TRIGGER_MASK) == GPIO_FLAG_EVENT_TRIGGER_LEVEL; @@ -179,152 +87,6 @@ static inline bool is_gpio_event_active_low(uint32_t flags) return (flags & GPIO_FLAG_EVENT_ACTIVE_MASK) == GPIO_FLAG_EVENT_ACTIVE_LOW; } -#define DEB_GLITCH_SHIFT 5 -#define DEB_GLITCH_LOW 1 -#define DEB_GLITCH_HIGH 2 -#define DEB_GLITCH_NONE 3 -#define GPIO_DEB_PRESERVE_LOW_GLITCH (DEB_GLITCH_LOW << DEB_GLITCH_SHIFT) -#define GPIO_DEB_PRESERVE_HIGH_GLITCH (DEB_GLITCH_HIGH << DEB_GLITCH_SHIFT) -#define GPIO_DEB_REMOVE_GLITCH (DEB_GLITCH_NONE << DEB_GLITCH_SHIFT) - -#define GPIO_TIMEBASE_61uS 0 -#define GPIO_TIMEBASE_183uS (1 << 4) -#define GPIO_TIMEBASE_15560uS (1 << 7) -#define GPIO_TIMEBASE_62440uS (GPIO_TIMEBASE_183uS | \ - GPIO_TIMEBASE_15560uS) -#define GPIO_DEB_DEBOUNCE_DISABLED (0 | GPIO_TIMEBASE_61uS) -#define GPIO_DEB_60uS (1 | GPIO_TIMEBASE_61uS) -#define GPIO_DEB_120uS (2 | GPIO_TIMEBASE_61uS) -#define GPIO_DEB_200uS (3 | GPIO_TIMEBASE_61uS) -#define GPIO_DEB_500uS (8 | GPIO_TIMEBASE_61uS) -#define GPIO_DEB_1mS (5 | GPIO_TIMEBASE_183uS) -#define GPIO_DEB_2mS (11 | GPIO_TIMEBASE_183uS) -#define GPIO_DEB_15mS (1 | GPIO_TIMEBASE_15560uS) -#define GPIO_DEB_50mS (3 | GPIO_TIMEBASE_15560uS) -#define GPIO_DEB_100mS (6 | GPIO_TIMEBASE_15560uS) -#define GPIO_DEB_200mS (13 | GPIO_TIMEBASE_15560uS) -#define GPIO_DEB_500mS (8 | GPIO_TIMEBASE_62440uS) - -#define GPIO_DEB_MASK 0xff - -#define GPIO_WAKE_S0i3 (1 << 13) -#define GPIO_WAKE_S3 (1 << 14) -#define GPIO_WAKE_S4_S5 (1 << 15) -#define GPIO_WAKE_S0i3_S4_S5 (GPIO_WAKE_S0i3 | GPIO_WAKE_S4_S5) -#define GPIO_WAKE_S3_S4_S5 (GPIO_WAKE_S3 | GPIO_WAKE_S4_S5) -#define GPIO_WAKE_MASK (7 << 13) - -/* - * Mask used to reset bits in GPIO control register when configuring pad using `program_gpios()` - * Bits that are preserved/untouched: - * - Reserved bits - * - Drive strength bits - * - Read only bits - */ -#define PAD_CFG_MASK (GPIO_DEB_MASK | GPIO_TRIGGER_MASK | GPIO_ACTIVE_MASK | \ - GPIO_INT_ENABLE_MASK | GPIO_WAKE_MASK | GPIO_PULL_MASK | \ - GPIO_OUTPUT_MASK | GPIO_STATUS_MASK) - -/* - * Several macros are available to declare programming of GPIO pins. The defined macros and - * their parameters are: - * PAD_NF Define native alternate function for the pin. - * pin the pin to be programmed - * function the native function - * pull pull up, pull down or no pull - * PAD_GPI The pin is a GPIO input - * pin the pin to be programmed - * pull pull up, pull down or no pull - * PAD_GPO The pin is a GPIO output - * pin the pin to be programmed - * direction high or low - * PAD_INT The pin is regular interrupt that works while booting - * pin the pin to be programmed - * pull pull up, pull down or no pull - * trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES - * action STATUS, DELIVER, STATUS_DELIVER - * PAD_SCI The pin is a SCI source - * pin the pin to be programmed - * pull pull up, pull down or no pull - * event trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH - * PAD_SMI The pin is a SMI source - * pin the pin to be programmed - * pull pull up, pull down or no pull - * event trigger LEVEL_LOW, LEVEL_HIGH - * PAD_WAKE The pin can wake, use after PAD_INT or PAD_SCI - * pin the pin to be programmed - * pull pull up, pull down or no pull - * trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES - * type S0i3, S3, S4_S5 or S4_S5 combinations (S0i3_S3 invalid) - * PAD_DEBOUNCE The input or interrupt will be debounced - * pin the pin to be programmed - * pull pull up, pull down or no pull - * debounce_type preserve low glitch, preserve high glitch, no glitch - * debounce_time the debounce time - */ - -#define PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, __flags) \ - { \ - .gpio = __pin, \ - .function = __function, \ - .control = __control, \ - .flags = __flags, \ - } - -#define PAD_CFG_STRUCT(__pin, __function, __control) \ - PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, 0) - -#define PAD_PULL(__pull) GPIO_PULL_ ## __pull -#define PAD_OUTPUT(__dir) GPIO_OUTPUT_OUT_ ## __dir -#define PAD_TRIGGER(__trig) GPIO_TRIGGER_ ## __trig -#define PAD_INT_ENABLE(__action) GPIO_INT_ENABLE_ ## __action -#define PAD_FLAG_EVENT_TRIGGER(__trig) GPIO_FLAG_EVENT_TRIGGER_ ## __trig -#define PAD_WAKE_ENABLE(__wake) GPIO_WAKE_ ## __wake -#define PAD_DEBOUNCE_CONFIG(__deb) GPIO_DEB_ ## __deb - -/* Native function pad configuration */ -#define PAD_NF(pin, func, pull) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_ ## func, PAD_PULL(pull)) - -/* General purpose input pad configuration */ -#define PAD_GPI(pin, pull) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(pull)) - -/* General purpose output pad configuration */ -#define PAD_GPO(pin, direction) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_OUTPUT(direction)) - -/* Legacy interrupt pad configuration */ -#define PAD_INT(pin, pull, trigger, action) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ - PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_INT_ENABLE(action)) - -/* SCI pad configuration */ -#define PAD_SCI(pin, pull, trigger) \ - PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx, \ - PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH), \ - PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SCI) - -/* SMI pad configuration */ -#define PAD_SMI(pin, pull, trigger) \ - PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx, \ - PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH), \ - PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SMI) - -/* WAKE pad configuration */ -#define PAD_WAKE(pin, pull, trigger, type) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ - PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_WAKE_ENABLE(type)) - -/* pin debounce configuration */ -#define PAD_DEBOUNCE(pin, pull, type, time) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ - PAD_PULL(pull) | PAD_DEBOUNCE_CONFIG(type) | PAD_DEBOUNCE_CONFIG(time)) - -/* No-connect pad - configured as input with PULL_DOWN */ -#define PAD_NC(pin) \ - PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(PULL_DOWN)) - typedef uint32_t gpio_t; /* diff --git a/src/soc/amd/common/block/include/amdblocks/gpio_defs.h b/src/soc/amd/common/block/include/amdblocks/gpio_defs.h new file mode 100644 index 0000000000..f0c6f660d0 --- /dev/null +++ b/src/soc/amd/common/block/include/amdblocks/gpio_defs.h @@ -0,0 +1,248 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef AMD_BLOCK_GPIO_DEFS_H +#define AMD_BLOCK_GPIO_DEFS_H + +#define GPIO_MASTER_SWITCH 0xFC +#define GPIO_MASK_STS_EN BIT(28) +#define GPIO_INTERRUPT_EN BIT(30) +#define GPIO_WAKE_EN BIT(31) + +#define GPIO_WAKE_STAT_0 0x2F0 +#define GPIO_WAKE_STAT_1 0x2F4 + +#define GPIO_PIN_IN (1 << 0) /* for byte access */ +#define GPIO_PIN_OUT (1 << 6) /* for byte access */ + +/* Pad trigger type - Level or Edge */ +#define GPIO_TRIGGER_EDGE (0 << 8) +#define GPIO_TRIGGER_LEVEL (1 << 8) +#define GPIO_TRIGGER_MASK (1 << 8) + +/* + * Pad polarity: + * Level trigger - High or Low + * Edge trigger - High (Rising), Low (Falling), Both + */ +#define GPIO_ACTIVE_HIGH (0 << 9) +#define GPIO_ACTIVE_LOW (1 << 9) +#define GPIO_ACTIVE_BOTH (2 << 9) +#define GPIO_ACTIVE_MASK (3 << 9) + +/* + * Pad trigger and polarity configuration. + * This determines the filtering applied on the input signal at the pad. + */ +#define GPIO_TRIGGER_EDGE_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_EDGE) +#define GPIO_TRIGGER_EDGE_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_EDGE) +#define GPIO_TRIGGER_BOTH_EDGES (GPIO_ACTIVE_BOTH | GPIO_TRIGGER_EDGE) +#define GPIO_TRIGGER_LEVEL_HIGH (GPIO_ACTIVE_HIGH | GPIO_TRIGGER_LEVEL) +#define GPIO_TRIGGER_LEVEL_LOW (GPIO_ACTIVE_LOW | GPIO_TRIGGER_LEVEL) + +#define GPIO_INT_ENABLE_STATUS (1 << 11) +#define GPIO_INT_ENABLE_DELIVERY (1 << 12) +#define GPIO_INT_ENABLE_STATUS_DELIVERY \ + (GPIO_INT_ENABLE_STATUS | GPIO_INT_ENABLE_DELIVERY) +#define GPIO_INT_ENABLE_MASK (3 << 11) + +#define GPIO_S0I3_WAKE_EN (1 << 13) +#define GPIO_S3_WAKE_EN (1 << 14) +#define GPIO_S4_S5_WAKE_EN (1 << 15) + +#define GPIO_PIN_STS (1 << 16) +#define GPIO_8KPULLUP_SELECT (1 << 19) +#define GPIO_PULLUP_ENABLE (1 << 20) +#define GPIO_PULLDOWN_ENABLE (1 << 21) +#define GPIO_PULL_MASK (7 << 19) + +#define GPIO_INPUT_SHIFT 16 +#define GPIO_INPUT_VALUE (1 << GPIO_INPUT_SHIFT) + +#define GPIO_OUTPUT_SHIFT 22 +#define GPIO_OUTPUT_VALUE (1 << GPIO_OUTPUT_SHIFT) +#define GPIO_OUTPUT_ENABLE (1 << 23) +#define GPIO_OUTPUT_MASK (3 << GPIO_OUTPUT_SHIFT) + +#define GPIO_INT_STATUS (1 << 28) +#define GPIO_WAKE_STATUS (1 << 29) +#define GPIO_STATUS_MASK (3 << 28) + +#define GPIO_OUTPUT_OUT_HIGH (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE) +#define GPIO_OUTPUT_OUT_LOW GPIO_OUTPUT_ENABLE + +#define GPIO_PULL_PULL_UP_8K (GPIO_PULLUP_ENABLE | GPIO_8KPULLUP_SELECT) +#define GPIO_PULL_PULL_UP GPIO_PULLUP_ENABLE +#define GPIO_PULL_PULL_DOWN GPIO_PULLDOWN_ENABLE +#define GPIO_PULL_PULL_NONE 0 + +#define AMD_GPIO_MUX_MASK 0x03 + +/* + * Flags used for GPIO configuration. These provide additional information that does not go + * directly into GPIO control register. These are stored in `flags` field in soc_amd_gpio. + */ +#define GPIO_FLAG_EVENT_TRIGGER_LEVEL (1 << 0) +#define GPIO_FLAG_EVENT_TRIGGER_EDGE (0 << 0) +#define GPIO_FLAG_EVENT_TRIGGER_MASK (1 << 0) +#define GPIO_FLAG_EVENT_ACTIVE_HIGH (1 << 1) +#define GPIO_FLAG_EVENT_ACTIVE_LOW (0 << 1) +#define GPIO_FLAG_EVENT_ACTIVE_MASK (1 << 1) +#define GPIO_FLAG_SCI (1 << 2) +#define GPIO_FLAG_SMI (1 << 3) + +/* Trigger configuration for GPIO SCI/SMI events. */ +#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_HIGH (GPIO_FLAG_EVENT_TRIGGER_LEVEL | \ + GPIO_FLAG_EVENT_ACTIVE_HIGH) +#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_LOW (GPIO_FLAG_EVENT_TRIGGER_LEVEL | \ + GPIO_FLAG_EVENT_ACTIVE_LOW) +#define GPIO_FLAG_EVENT_TRIGGER_EDGE_HIGH (GPIO_FLAG_EVENT_TRIGGER_EDGE | \ + GPIO_FLAG_EVENT_ACTIVE_HIGH) +#define GPIO_FLAG_EVENT_TRIGGER_EDGE_LOW (GPIO_FLAG_EVENT_TRIGGER_EDGE | \ + GPIO_FLAG_EVENT_ACTIVE_LOW) +#define DEB_GLITCH_SHIFT 5 +#define DEB_GLITCH_LOW 1 +#define DEB_GLITCH_HIGH 2 +#define DEB_GLITCH_NONE 3 +#define GPIO_DEB_PRESERVE_LOW_GLITCH (DEB_GLITCH_LOW << DEB_GLITCH_SHIFT) +#define GPIO_DEB_PRESERVE_HIGH_GLITCH (DEB_GLITCH_HIGH << DEB_GLITCH_SHIFT) +#define GPIO_DEB_REMOVE_GLITCH (DEB_GLITCH_NONE << DEB_GLITCH_SHIFT) + +#define GPIO_TIMEBASE_61uS 0 +#define GPIO_TIMEBASE_183uS (1 << 4) +#define GPIO_TIMEBASE_15560uS (1 << 7) +#define GPIO_TIMEBASE_62440uS (GPIO_TIMEBASE_183uS | \ + GPIO_TIMEBASE_15560uS) +#define GPIO_DEB_DEBOUNCE_DISABLED (0 | GPIO_TIMEBASE_61uS) +#define GPIO_DEB_60uS (1 | GPIO_TIMEBASE_61uS) +#define GPIO_DEB_120uS (2 | GPIO_TIMEBASE_61uS) +#define GPIO_DEB_200uS (3 | GPIO_TIMEBASE_61uS) +#define GPIO_DEB_500uS (8 | GPIO_TIMEBASE_61uS) +#define GPIO_DEB_1mS (5 | GPIO_TIMEBASE_183uS) +#define GPIO_DEB_2mS (11 | GPIO_TIMEBASE_183uS) +#define GPIO_DEB_15mS (1 | GPIO_TIMEBASE_15560uS) +#define GPIO_DEB_50mS (3 | GPIO_TIMEBASE_15560uS) +#define GPIO_DEB_100mS (6 | GPIO_TIMEBASE_15560uS) +#define GPIO_DEB_200mS (13 | GPIO_TIMEBASE_15560uS) +#define GPIO_DEB_500mS (8 | GPIO_TIMEBASE_62440uS) + +#define GPIO_DEB_MASK 0xff + +#define GPIO_WAKE_S0i3 (1 << 13) +#define GPIO_WAKE_S3 (1 << 14) +#define GPIO_WAKE_S4_S5 (1 << 15) +#define GPIO_WAKE_S0i3_S4_S5 (GPIO_WAKE_S0i3 | GPIO_WAKE_S4_S5) +#define GPIO_WAKE_S3_S4_S5 (GPIO_WAKE_S3 | GPIO_WAKE_S4_S5) +#define GPIO_WAKE_MASK (7 << 13) + +/* + * Mask used to reset bits in GPIO control register when configuring pad using `program_gpios()` + * Bits that are preserved/untouched: + * - Reserved bits + * - Drive strength bits + * - Read only bits + */ +#define PAD_CFG_MASK (GPIO_DEB_MASK | GPIO_TRIGGER_MASK | GPIO_ACTIVE_MASK | \ + GPIO_INT_ENABLE_MASK | GPIO_WAKE_MASK | GPIO_PULL_MASK | \ + GPIO_OUTPUT_MASK | GPIO_STATUS_MASK) + +/* + * Several macros are available to declare programming of GPIO pins. The defined macros and + * their parameters are: + * PAD_NF Define native alternate function for the pin. + * pin the pin to be programmed + * function the native function + * pull pull up, pull down or no pull + * PAD_GPI The pin is a GPIO input + * pin the pin to be programmed + * pull pull up, pull down or no pull + * PAD_GPO The pin is a GPIO output + * pin the pin to be programmed + * direction high or low + * PAD_INT The pin is regular interrupt that works while booting + * pin the pin to be programmed + * pull pull up, pull down or no pull + * trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES + * action STATUS, DELIVER, STATUS_DELIVER + * PAD_SCI The pin is a SCI source + * pin the pin to be programmed + * pull pull up, pull down or no pull + * event trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH + * PAD_SMI The pin is a SMI source + * pin the pin to be programmed + * pull pull up, pull down or no pull + * event trigger LEVEL_LOW, LEVEL_HIGH + * PAD_WAKE The pin can wake, use after PAD_INT or PAD_SCI + * pin the pin to be programmed + * pull pull up, pull down or no pull + * trigger LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES + * type S0i3, S3, S4_S5 or S4_S5 combinations (S0i3_S3 invalid) + * PAD_DEBOUNCE The input or interrupt will be debounced + * pin the pin to be programmed + * pull pull up, pull down or no pull + * debounce_type preserve low glitch, preserve high glitch, no glitch + * debounce_time the debounce time + */ + +#define PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, __flags) \ + { \ + .gpio = __pin, \ + .function = __function, \ + .control = __control, \ + .flags = __flags, \ + } + +#define PAD_CFG_STRUCT(__pin, __function, __control) \ + PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, 0) + +#define PAD_PULL(__pull) GPIO_PULL_ ## __pull +#define PAD_OUTPUT(__dir) GPIO_OUTPUT_OUT_ ## __dir +#define PAD_TRIGGER(__trig) GPIO_TRIGGER_ ## __trig +#define PAD_INT_ENABLE(__action) GPIO_INT_ENABLE_ ## __action +#define PAD_FLAG_EVENT_TRIGGER(__trig) GPIO_FLAG_EVENT_TRIGGER_ ## __trig +#define PAD_WAKE_ENABLE(__wake) GPIO_WAKE_ ## __wake +#define PAD_DEBOUNCE_CONFIG(__deb) GPIO_DEB_ ## __deb + +/* Native function pad configuration */ +#define PAD_NF(pin, func, pull) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_ ## func, PAD_PULL(pull)) + +/* General purpose input pad configuration */ +#define PAD_GPI(pin, pull) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(pull)) + +/* General purpose output pad configuration */ +#define PAD_GPO(pin, direction) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_OUTPUT(direction)) + +/* Legacy interrupt pad configuration */ +#define PAD_INT(pin, pull, trigger, action) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ + PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_INT_ENABLE(action)) + +/* SCI pad configuration */ +#define PAD_SCI(pin, pull, trigger) \ + PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx, \ + PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH), \ + PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SCI) + +/* SMI pad configuration */ +#define PAD_SMI(pin, pull, trigger) \ + PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx, \ + PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH), \ + PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SMI) + +/* WAKE pad configuration */ +#define PAD_WAKE(pin, pull, trigger, type) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ + PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_WAKE_ENABLE(type)) + +/* pin debounce configuration */ +#define PAD_DEBOUNCE(pin, pull, type, time) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, \ + PAD_PULL(pull) | PAD_DEBOUNCE_CONFIG(type) | PAD_DEBOUNCE_CONFIG(time)) + +/* No-connect pad - configured as input with PULL_DOWN */ +#define PAD_NC(pin) \ + PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(PULL_DOWN)) + +#endif /* AMD_BLOCK_GPIO_DEFS_H */ |