diff options
Diffstat (limited to 'src/soc/amd/stoneyridge/fixme.c')
| -rw-r--r-- | src/soc/amd/stoneyridge/fixme.c | 104 |
1 files changed, 46 insertions, 58 deletions
diff --git a/src/soc/amd/stoneyridge/fixme.c b/src/soc/amd/stoneyridge/fixme.c index 60cc2d14cb..67517250fd 100644 --- a/src/soc/amd/stoneyridge/fixme.c +++ b/src/soc/amd/stoneyridge/fixme.c @@ -13,79 +13,67 @@ * GNU General Public License for more details. */ +#include <device/device.h> +#include <cpu/cpu.h> +#include <cpu/x86/lapic_def.h> +#include <cpu/x86/msr.h> #include <cpu/x86/mtrr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdfam15.h> #include <soc/pci_devs.h> +#include <soc/pci_devs.h> +#include <soc/northbridge.h> +#include <soc/southbridge.h> #include <agesawrapper.h> -#include <amdlib.h> +/* + * Enable VGA cycles. Set memory ranges of the FCH legacy devices (TPM, HPET, + * BIOS RAM, Watchdog Timer, IOAPIC and ACPI) as non-posted. Set remaining + * MMIO to posted. Route all I/O to the southbridge. + */ void amd_initcpuio(void) { - UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; - AMD_CONFIG_PARAMS StdHeader; + msr_t topmem = rdmsr(TOP_MEM); /* todo: build bsp_topmem() earlier */ + uintptr_t base, limit; /* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xf4); - PciData = 1; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + pci_write_config32(SOC_ADDR_DEV, D18F1_VGAEN, VGA_ADDR_ENABLE); - /* The platform BIOS needs to ensure the memory ranges of SB800 - * legacy devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and - * ACPI) are set to non-posted regions. - */ - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84); - /* last address before processor local APIC at FEE00000 */ - PciData = 0x00fedf00; - PciData |= 1 << 7; /* set NP (non-posted) bit */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80); - /* lowest NP address is HPET at FED00000 */ - PciData = (0xfed00000 >> 8) | 3; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Non-posted: range(HPET-LAPIC) or 0xfed00000 through 0xfee00000-1 */ + base = (HPET_BASE_ADDRESS >> 8) | MMIO_WE | MMIO_RE; + limit = (ALIGN_DOWN(LOCAL_APIC_ADDR - 1, 64 * KiB) >> 8) | MMIO_NP; + pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(0), limit); + pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(0), base); - /* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8c); - PciData = 0x00fecf00; /* last address before non-posted range */ - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead(TOP_MEM, &MsrReg, &StdHeader); - MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88); - PciData = (UINT32)MsrReg; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Remaining PCI hole posted MMIO: TOM-HPET (TOM through 0xfed00000-1 */ + base = (topmem.lo >> 8) | MMIO_WE | MMIO_RE; + limit = ALIGN_DOWN(HPET_BASE_ADDRESS - 1, 64 * KiB) >> 8; + pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(1), limit); + pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(1), base); - /* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xc4); - PciData = 0x0000f000; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xc0); - PciData = 0x00000003; - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); + /* Route all I/O downstream */ + base = 0 | IO_WE | IO_RE; + limit = ALIGN_DOWN(0xffff, 4 * KiB); + pci_write_config32(SOC_ADDR_DEV, NB_IO_LIMIT(0), limit); + pci_write_config32(SOC_ADDR_DEV, NB_IO_BASE(0), base); } +/* Set the MMIO Configuration Base Address and Bus Range. */ void amd_initmmio(void) { - UINT64 MsrReg; - AMD_CONFIG_PARAMS StdHeader; + msr_t mmconf; + msr_t mtrr_cap = rdmsr(MTRR_CAP_MSR); + int mtrr; - /* - Set the MMIO Configuration Base Address and Bus Range onto MMIO - configuration base Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | - (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) - | 1; - LibAmdMsrWrite(0xc0010058, &MsrReg, &StdHeader); - - /* Set ROM cache onto WP to decrease post time */ - MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite(0x20c, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite(0x20d, &MsrReg, &StdHeader); + mmconf.hi = 0; + mmconf.lo = CONFIG_MMCONF_BASE_ADDRESS | MMIO_RANGE_EN + | fms(CONFIG_MMCONF_BUS_NUMBER) << MMIO_BUS_RANGE_SHIFT; + wrmsr(MMIO_CONF_BASE, mmconf); - if (IS_ENABLED(CONFIG_UDELAY_LAPIC)) { - LibAmdMsrRead(0x1b, &MsrReg, &StdHeader); - MsrReg |= 1 << 11; - LibAmdMsrWrite(0x1b, &MsrReg, &StdHeader); - } + /* + * todo: AGESA currently writes variable MTRRs. Once that is + * corrected, un-hardcode this MTRR. + */ + mtrr = (mtrr_cap.lo & MTRR_CAP_VCNT) - 2; + set_var_mtrr(mtrr, FLASH_BASE_ADDR, CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT); } |