summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/amd/stoneyridge')
-rw-r--r--src/soc/amd/stoneyridge/Kconfig56
-rw-r--r--src/soc/amd/stoneyridge/Makefile.inc4
-rw-r--r--src/soc/amd/stoneyridge/acpi/northbridge.asl134
-rw-r--r--src/soc/amd/stoneyridge/chip.c33
-rw-r--r--src/soc/amd/stoneyridge/chip.h5
-rw-r--r--src/soc/amd/stoneyridge/dimmSpd.c49
-rw-r--r--src/soc/amd/stoneyridge/fixme.c2
-rw-r--r--src/soc/amd/stoneyridge/include/soc/gpio.h2
-rw-r--r--src/soc/amd/stoneyridge/include/soc/northbridge.h26
-rw-r--r--src/soc/amd/stoneyridge/northbridge.c693
-rw-r--r--src/soc/amd/stoneyridge/ramtop.c33
-rw-r--r--src/soc/amd/stoneyridge/smbus_spd.c3
12 files changed, 1027 insertions, 13 deletions
diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig
index 591037f4ab..d07833d0af 100644
--- a/src/soc/amd/stoneyridge/Kconfig
+++ b/src/soc/amd/stoneyridge/Kconfig
@@ -35,10 +35,11 @@ config CPU_SPECIFIC_OPTIONS
select HAVE_USBDEBUG_OPTIONS
select HAVE_HARD_RESET
select LAPIC_MONOTONIC_TIMER
- select SOC_AMD_COMMON
- select SOC_AMD_PI
+ select LATE_CBMEM_INIT
select SPI_FLASH if HAVE_ACPI_RESUME
select TSC_SYNC_LFENCE
+ select SOC_AMD_COMMON
+ select SOC_AMD_PI
select UDELAY_LAPIC
config UDELAY_LAPIC_FIXED_FSB
@@ -69,6 +70,57 @@ config CDB
hex
default 0x18
+config BOTTOMIO_POSITION
+ hex "Bottom of 32-bit IO space"
+ default 0xD0000000
+ help
+ If PCI peripherals with big BARs are connected to the system
+ the bottom of the IO must be decreased to allocate such
+ devices.
+
+ Declare the beginning of the 128MB-aligned MMIO region. This
+ option is useful when PCI peripherals requesting large address
+ ranges are present.
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xF8000000
+
+config MMCONF_BUS_NUMBER
+ int
+ default 64
+
+config VGA_BIOS_ID
+ string
+ default "1002,98e4"
+ help
+ The default VGA BIOS PCI vendor/device ID should be set to the
+ result of the map_oprom_vendev() function in northbridge.c.
+
+config VGA_BIOS_FILE
+ string
+ default "3rdparty/blobs/northbridge/amd/00670F00/VBIOS.bin"
+
+config RAMTOP
+ hex
+ default 0x1000000
+
+config HEAP_SIZE
+ hex
+ default 0xc0000
+
+config RAMBASE
+ hex
+ default 0x200000
+
config BOOTBLOCK_SOUTHBRIDGE_INIT
string
default "soc/amd/stoneyridge/bootblock/bootblock.c"
diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc
index 9214488fc7..7ced68887b 100644
--- a/src/soc/amd/stoneyridge/Makefile.inc
+++ b/src/soc/amd/stoneyridge/Makefile.inc
@@ -38,11 +38,13 @@ subdirs-y += ../../../cpu/x86/pae
subdirs-y += ../../../cpu/x86/smm
romstage-y += early_setup.c
+romstage-y += dimmSpd.c
romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += enable_usbdebug.c
romstage-y += fixme.c
romstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c
romstage-y += smbus.c
romstage-y += smbus_spd.c
+romstage-y += ramtop.c
romstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
ramstage-y += chip.c
@@ -56,6 +58,7 @@ ramstage-y += ide.c
ramstage-$(CONFIG_STONEYRIDGE_IMC_FWM) += imc.c
ramstage-y += lpc.c
ramstage-y += model_15_init.c
+ramstage-y += northbridge.c
ramstage-y += pci.c
ramstage-y += pcie.c
ramstage-y += reset.c
@@ -63,6 +66,7 @@ ramstage-y += sata.c
ramstage-y += sd.c
ramstage-y += sm.c
ramstage-y += smbus.c
+ramstage-y += ramtop.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c
ramstage-$(CONFIG_STONEYRIDGE_UART) += uart.c
diff --git a/src/soc/amd/stoneyridge/acpi/northbridge.asl b/src/soc/amd/stoneyridge/acpi/northbridge.asl
new file mode 100644
index 0000000000..c5876ff4d4
--- /dev/null
+++ b/src/soc/amd/stoneyridge/acpi/northbridge.asl
@@ -0,0 +1,134 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ * Copyright (C) 2016 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Note: Only need HID on Primary Bus */
+External (TOM1)
+External (TOM2)
+Name(_HID, EISAID("PNP0A08")) /* PCI Express Root Bridge */
+Name(_CID, EISAID("PNP0A03")) /* PCI Root Bridge */
+Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
+
+/* Describe the Northbridge devices */
+
+Method(_BBN, 0, NotSerialized) /* Bus number = 0 */
+{
+ Return(Zero)
+}
+
+Method(_STA, 0, NotSerialized)
+{
+ Return(0x0B) /* Status is visible */
+}
+
+Method(_PRT,0, NotSerialized)
+{
+ If(PMOD)
+ {
+ Return(APR0) /* APIC mode */
+ }
+ Return (PR0) /* PIC Mode */
+}
+
+Device(AMRT) {
+ Name(_ADR, 0x00000000)
+} /* end AMRT */
+
+/* Gpp 0 */
+Device(PBR4) {
+ Name(_ADR, 0x00020001)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS4) } /* APIC mode */
+ Return (PS4) /* PIC Mode */
+ } /* end _PRT */
+} /* end PBR4 */
+
+/* Gpp 1 */
+Device(PBR5) {
+ Name(_ADR, 0x00020002)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS5) } /* APIC mode */
+ Return (PS5) /* PIC Mode */
+ } /* end _PRT */
+} /* end PBR5 */
+
+/* Gpp 2 */
+Device(PBR6) {
+ Name(_ADR, 0x00020003)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS6) } /* APIC mode */
+ Return (PS6) /* PIC Mode */
+ } /* end _PRT */
+} /* end PBR6 */
+
+/* Gpp 3 */
+Device(PBR7) {
+ Name(_ADR, 0x00020004)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS7) } /* APIC mode */
+ Return (PS7) /* PIC Mode */
+ } /* end _PRT */
+} /* end PBR7 */
+
+/* Gpp 4 */
+Device(PBR8) {
+ Name(_ADR, 0x00020005)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS8) } /* APIC mode */
+ Return (PS8) /* PIC Mode */
+ } /* end _PRT */
+} /* end PBR8 */
+
+Device(AZHD) { /* 0:9.2 - HD Audio */
+ Name(_ADR, 0x00090002)
+ OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+ Field(AZPD, AnyAcc, NoLock, Preserve) {
+ offset (0x42),
+ NSDI, 1,
+ NSDO, 1,
+ NSEN, 1,
+ offset (0x44),
+ IPCR, 4,
+ offset (0x54),
+ PWST, 2,
+ , 6,
+ PMEB, 1,
+ , 6,
+ PMST, 1,
+ offset (0x62),
+ MMCR, 1,
+ offset (0x64),
+ MMLA, 32,
+ offset (0x68),
+ MMHA, 32,
+ offset (0x6C),
+ MMDT, 16,
+ }
+
+ Method (_INI, 0, NotSerialized)
+ {
+ If (LEqual (OSVR, 0x03))
+ {
+ Store (Zero, NSEN)
+ Store (One, NSDO)
+ Store (One, NSDI)
+ }
+ }
+} /* end AZHD */
diff --git a/src/soc/amd/stoneyridge/chip.c b/src/soc/amd/stoneyridge/chip.c
index 3faf536ef9..78a29f872d 100644
--- a/src/soc/amd/stoneyridge/chip.c
+++ b/src/soc/amd/stoneyridge/chip.c
@@ -12,25 +12,46 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+
#include <chip.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/cpu.h>
#include <device/device.h>
#include <device/pci.h>
#include <soc/hudson.h>
+#include <soc/northbridge.h>
-static void pci_domain_set_resources(device_t dev)
+static void cpu_bus_init(device_t dev)
{
- assign_resources(dev->link_list);
+ initialize_cpus(dev->link_list);
}
-static struct device_operations pci_domain_ops = {
- .set_resources = &pci_domain_set_resources,
+struct device_operations cpu_bus_ops = {
+ .read_resources = DEVICE_NOOP,
+ .set_resources = DEVICE_NOOP,
+ .enable_resources = DEVICE_NOOP,
+ .init = &cpu_bus_init,
+ .scan_bus = cpu_bus_scan,
};
-static struct device_operations cpu_bus_ops = {
+struct device_operations pci_domain_ops = {
+ .read_resources = domain_read_resources,
+ .set_resources = domain_set_resources,
+ .enable_resources = domain_enable_resources,
+ .init = NULL,
+ .scan_bus = pci_domain_scan_bus,
+ .ops_pci_bus = pci_bus_default_ops,
};
static void enable_dev(device_t dev)
{
+ static int done = 0;
+
+ if (!done) {
+ setup_bsp_ramtop();
+ done = 1;
+ }
+
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_DOMAIN) {
dev->ops = &pci_domain_ops;
@@ -49,6 +70,7 @@ static void soc_init(void *chip_info)
static void soc_final(void *chip_info)
{
hudson_final(chip_info);
+ fam15_finalize(chip_info);
}
struct chip_operations soc_amd_stoneyridge_ops = {
@@ -57,4 +79,3 @@ struct chip_operations soc_amd_stoneyridge_ops = {
.init = &soc_init,
.final = &soc_final
};
-
diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h
index 9dd4997931..f913b055a2 100644
--- a/src/soc/amd/stoneyridge/chip.h
+++ b/src/soc/amd/stoneyridge/chip.h
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010-2017 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
struct soc_amd_stoneyridge_config
{
+ u8 spdAddrLookup[1][1][2];
u32 ide0_enable : 1;
u32 sata0_enable : 1;
u32 boot_switch_sata_ide : 1;
@@ -30,4 +31,6 @@ struct soc_amd_stoneyridge_config
typedef struct soc_amd_stoneyridge_config config_t;
+extern struct device_operations pci_domain_ops;
+
#endif /* STONEYRIDGE_CHIP_H */
diff --git a/src/soc/amd/stoneyridge/dimmSpd.c b/src/soc/amd/stoneyridge/dimmSpd.c
new file mode 100644
index 0000000000..80fe12db0c
--- /dev/null
+++ b/src/soc/amd/stoneyridge/dimmSpd.c
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 - 2016 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/pci_def.h>
+#include <device/device.h>
+#include <stdlib.h>
+
+/* warning: Porting.h includes an open #pragma pack(1) */
+#include <Porting.h>
+#include <AGESA.h>
+#include <amdlib.h>
+#include "chip.h"
+#include <dimmSpd.h>
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
+{
+ int spdAddress;
+ DEVTREE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2));
+ DEVTREE_CONST struct soc_amd_stoneyridge_config *config = dev->chip_info;
+
+ if ((dev == 0) || (config == 0))
+ return AGESA_ERROR;
+ if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup))
+ return AGESA_ERROR;
+ if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0]))
+ return AGESA_ERROR;
+ if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0]))
+ return AGESA_ERROR;
+ spdAddress = config->spdAddrLookup
+ [info->SocketId] [info->MemChannelId] [info->DimmId];
+ if (spdAddress == 0)
+ return AGESA_ERROR;
+ int err = hudson_readSpd(spdAddress, (void *) info->Buffer, 128);
+ if (err)
+ return AGESA_ERROR;
+ return AGESA_SUCCESS;
+}
diff --git a/src/soc/amd/stoneyridge/fixme.c b/src/soc/amd/stoneyridge/fixme.c
index 781d0097b0..a0935e727a 100644
--- a/src/soc/amd/stoneyridge/fixme.c
+++ b/src/soc/amd/stoneyridge/fixme.c
@@ -14,7 +14,7 @@
*/
#include <cpu/x86/mtrr.h>
-#include <northbridge/amd/pi/agesawrapper.h>
+#include <agesawrapper.h>
#include <amdlib.h>
void amd_initcpuio(void)
diff --git a/src/soc/amd/stoneyridge/include/soc/gpio.h b/src/soc/amd/stoneyridge/include/soc/gpio.h
index 22c0fba123..07d4009efa 100644
--- a/src/soc/amd/stoneyridge/include/soc/gpio.h
+++ b/src/soc/amd/stoneyridge/include/soc/gpio.h
@@ -16,7 +16,7 @@
#ifndef _STONEYRIDGE_GPIO_H_
#define _STONEYRIDGE_GPIO_H_
-#include <soc/amd/common/amd_defs.h>
+#include <amd_defs.h>
#include <types.h>
#define CROS_GPIO_DEVICE_NAME "AmdKern"
diff --git a/src/soc/amd/stoneyridge/include/soc/northbridge.h b/src/soc/amd/stoneyridge/include/soc/northbridge.h
new file mode 100644
index 0000000000..9ecbb13a9a
--- /dev/null
+++ b/src/soc/amd/stoneyridge/include/soc/northbridge.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef NORTHBRIDGE_AMD_AGESA_FAM15H_H
+#define NORTHBRIDGE_AMD_AGESA_FAM15H_H
+
+void cpu_bus_scan(device_t dev);
+void domain_enable_resources(device_t dev);
+void domain_read_resources(device_t dev);
+void domain_set_resources(device_t dev);
+void fam15_finalize(void *chip_info);
+void setup_uma_memory(void);
+
+#endif /* NORTHBRIDGE_AMD_AGESA_FAM15H_H */
diff --git a/src/soc/amd/stoneyridge/northbridge.c b/src/soc/amd/stoneyridge/northbridge.c
new file mode 100644
index 0000000000..71f4897b39
--- /dev/null
+++ b/src/soc/amd/stoneyridge/northbridge.c
@@ -0,0 +1,693 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015-2016 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <arch/io.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <cbmem.h>
+#include <chip.h>
+#include <console/console.h>
+#include <cpu/amd/amdfam15.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/cpu.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/hypertransport.h>
+#include <lib.h>
+#include <agesawrapper.h>
+#include <agesawrapper_call.h>
+#include <soc/northbridge.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+/*
+ * AMD vendorcode files. Place at the end so coreboot defaults and maintained
+ * and not set by vendorcode
+ */
+#include <AGESA.h>
+#include <cpuRegisters.h>
+#include <FieldAccessors.h>
+#include <Options.h>
+#include <Porting.h>
+#include <Topology.h>
+
+#define MAX_NODE_NUMS (MAX_NODES * MAX_DIES)
+
+#if (defined CONFIG_EXT_CONF_SUPPORT) && CONFIG_EXT_CONF_SUPPORT == 1
+#error CONFIG_EXT_CONF_SUPPORT == 1 not support anymore!
+#endif
+
+typedef struct dram_base_mask {
+ u32 base; //[47:27] at [28:8]
+ u32 mask; //[47:27] at [28:8] and enable at bit 0
+} dram_base_mask_t;
+
+static unsigned node_nums;
+static unsigned sblink;
+static device_t __f0_dev;
+static device_t __f1_dev;
+static device_t __f2_dev;
+static device_t __f4_dev;
+static unsigned fx_dev = 0;
+
+static dram_base_mask_t get_dram_base_mask(u32 nodeid)
+{
+ device_t dev = __f1_dev;
+ dram_base_mask_t d;
+ u32 temp;
+ temp = pci_read_config32(dev, 0x44 + (nodeid << 3)); //[39:24] at [31:16]
+ d.mask = ((temp & 0xfff80000) >> (8 + 3)); // mask out DramMask [26:24] too
+ temp = pci_read_config32(dev, 0x144 + (nodeid << 3)) & 0xff; //[47:40] at [7:0]
+ d.mask |= temp << 21;
+ temp = pci_read_config32(dev, 0x40 + (nodeid << 3)); //[39:24] at [31:16]
+ d.mask |= (temp & 1); // enable bit
+ d.base = ((temp & 0xfff80000) >> (8 + 3)); // mask out DramBase [26:24) too
+ temp = pci_read_config32(dev, 0x140 + (nodeid << 3)) & 0xff; //[47:40] at [7:0]
+ d.base |= temp << 21;
+ return d;
+}
+
+static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg,
+ u32 io_min, u32 io_max)
+{
+ u32 tempreg;
+ /* io range allocation */
+ tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4) | ((io_max & 0xf0) << (12 - 4)); //limit
+ pci_write_config32(__f1_dev, reg + 4, tempreg);
+ tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); //base :ISA and VGA ?
+ pci_write_config32(__f1_dev, reg, tempreg);
+}
+
+static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmio_min, u32 mmio_max)
+{
+ u32 tempreg;
+ /* io range allocation */
+ tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00); //limit
+ pci_write_config32(__f1_dev, reg + 4, tempreg);
+ tempreg = 3 | (nodeid & 0x30) | (mmio_min & 0xffffff00);
+ pci_write_config32(__f1_dev, reg, tempreg);
+}
+
+static device_t get_node_pci(u32 fn)
+{
+ return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, fn));
+}
+
+static void get_fx_dev(void)
+{
+ __f0_dev = get_node_pci(0);
+ __f1_dev = get_node_pci(1);
+ __f2_dev = get_node_pci(2);
+ __f4_dev = get_node_pci(4);
+ fx_dev = 1;
+
+ if (__f1_dev == NULL || __f0_dev == NULL || fx_dev == 0)
+ die("Cannot find 0:0x18.[0|1]\n");
+}
+
+static u32 f1_read_config32(unsigned reg)
+{
+ if (fx_dev == 0)
+ get_fx_dev();
+ return pci_read_config32(__f1_dev, reg);
+}
+
+static void f1_write_config32(unsigned reg, u32 value)
+{
+ if (fx_dev == 0)
+ get_fx_dev();
+ pci_write_config32(__f1_dev, reg, value);
+}
+
+static void set_vga_enable_reg(u32 nodeid, u32 linkn)
+{
+ u32 val;
+
+ val = 1 | (nodeid << 4) | (linkn << 12);
+ /* Routes:
+ * mmio 0xa0000:0xbffff
+ * io 0x3b0:0x3bb, 0x3c0:0x3df
+ */
+ f1_write_config32(0xf4, val);
+}
+
+static void read_resources(device_t dev)
+{
+
+ /*
+ * This MMCONF resource must be reserved in the PCI domain.
+ * It is not honored by the coreboot resource allocator if it is in
+ * the CPU_CLUSTER.
+ */
+ mmconf_resource(dev, 0xc0010058);
+}
+
+static void set_resource(device_t dev, struct resource *resource, u32 nodeid)
+{
+ resource_t rbase, rend;
+ unsigned reg, link_num;
+ char buf[50];
+
+ /* Make certain the resource has actually been set */
+ if (!(resource->flags & IORESOURCE_ASSIGNED))
+ return;
+
+ /* If I have already stored this resource don't worry about it */
+ if (resource->flags & IORESOURCE_STORED)
+ return;
+
+ /* Only handle PCI memory and IO resources */
+ if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
+ return;
+
+ /* Ensure I am actually looking at a resource of function 1 */
+ if ((resource->index & 0xffff) < 0x1000)
+ return;
+
+ /* Get the base address */
+ rbase = resource->base;
+
+ /* Get the limit (rounded up) */
+ rend = resource_end(resource);
+
+ /* Get the register and link */
+ reg = resource->index & 0xfff; // 4k
+ link_num = IOINDEX_LINK(resource->index);
+
+ if (resource->flags & IORESOURCE_IO) {
+ set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8);
+ }
+ else if (resource->flags & IORESOURCE_MEM) {
+ set_mmio_addr_reg(nodeid, link_num, reg, (resource->index >> 24), rbase >> 8, rend >> 8); // [39:8]
+ }
+ resource->flags |= IORESOURCE_STORED;
+ snprintf(buf, sizeof(buf), " <node %x link %x>",
+ nodeid, link_num);
+ report_resource_stored(dev, resource, buf);
+}
+
+/**
+ * I tried to reuse the resource allocation code in set_resource()
+ * but it is too difficult to deal with the resource allocation magic.
+ */
+
+static void create_vga_resource(device_t dev)
+{
+ struct bus *link;
+
+ /* find out which link the VGA card is connected,
+ * we only deal with the 'first' vga card */
+ for (link = dev->link_list; link; link = link->next) {
+ if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA)
+ break;
+ }
+
+ /* no VGA card installed */
+ if (link == NULL)
+ return;
+
+ printk(BIOS_DEBUG, "VGA: %s link %d has VGA device\n", dev_path(dev), sblink);
+ set_vga_enable_reg(0, sblink);
+}
+
+static void set_resources(device_t dev)
+{
+ struct bus *bus;
+ struct resource *res;
+
+
+ /* do we need this? */
+ create_vga_resource(dev);
+
+ /* Set each resource we have found */
+ for (res = dev->resource_list; res; res = res->next) {
+ set_resource(dev, res, 0);
+ }
+
+ for (bus = dev->link_list; bus; bus = bus->next) {
+ if (bus->children) {
+ assign_resources(bus);
+ }
+ }
+}
+
+static void northbridge_init(struct device *dev)
+{
+}
+
+static unsigned long acpi_fill_hest(acpi_hest_t *hest)
+{
+ void *addr, *current;
+
+ /* Skip the HEST header. */
+ current = (void *)(hest + 1);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ return (unsigned long)current;
+}
+
+static void northbridge_fill_ssdt_generator(device_t device)
+{
+ msr_t msr;
+ char pscope[] = "\\_SB.PCI0";
+
+ acpigen_write_scope(pscope);
+ msr = rdmsr(TOP_MEM);
+ acpigen_write_name_dword("TOM1", msr.lo);
+ msr = rdmsr(TOP_MEM2);
+ /*
+ * Since XP only implements parts of ACPI 2.0, we can't use a qword
+ * here.
+ * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+ * slide 22ff.
+ * Shift value right by 20 bit to make it fit into 32bit,
+ * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+ */
+ acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+ acpigen_pop_len();
+}
+
+static unsigned long agesa_write_acpi_tables(device_t device,
+ unsigned long current,
+ acpi_rsdp_t *rsdp)
+{
+ acpi_srat_t *srat;
+ acpi_slit_t *slit;
+ acpi_header_t *ssdt;
+ acpi_header_t *alib;
+ acpi_header_t *ivrs;
+ acpi_hest_t *hest;
+
+ /* HEST */
+ current = ALIGN(current, 8);
+ hest = (acpi_hest_t *)current;
+ acpi_write_hest((void *)current, acpi_fill_hest);
+ acpi_add_table(rsdp, (void *)current);
+ current += ((acpi_header_t *)current)->length;
+
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current);
+ ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
+ if (ivrs != NULL) {
+ memcpy((void *)current, ivrs, ivrs->length);
+ ivrs = (acpi_header_t *) current;
+ current += ivrs->length;
+ acpi_add_table(rsdp, ivrs);
+ } else {
+ printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n");
+ }
+
+ /* SRAT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
+ srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+ if (srat != NULL) {
+ memcpy((void *)current, srat, srat->header.length);
+ srat = (acpi_srat_t *) current;
+ current += srat->header.length;
+ acpi_add_table(rsdp, srat);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n");
+ }
+
+ /* SLIT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
+ slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+ if (slit != NULL) {
+ memcpy((void *)current, slit, slit->header.length);
+ slit = (acpi_slit_t *) current;
+ current += slit->header.length;
+ acpi_add_table(rsdp, slit);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n");
+ }
+
+ /* ALIB */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current);
+ alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+ if (alib != NULL) {
+ memcpy((void *)current, alib, alib->length);
+ alib = (acpi_header_t *) current;
+ current += alib->length;
+ acpi_add_table(rsdp, (void *)alib);
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n");
+ }
+
+ /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
+ /* SSDT */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
+ ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+ if (ssdt != NULL) {
+ memcpy((void *)current, ssdt, ssdt->length);
+ ssdt = (acpi_header_t *) current;
+ current += ssdt->length;
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n");
+ }
+ acpi_add_table(rsdp,ssdt);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
+ return current;
+}
+
+static struct device_operations northbridge_operations = {
+ .read_resources = read_resources,
+ .set_resources = set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = northbridge_init,
+ .acpi_fill_ssdt_generator = northbridge_fill_ssdt_generator,
+ .write_acpi_tables = agesa_write_acpi_tables,
+ .enable = 0,
+ .ops_pci = 0,
+};
+
+static const struct pci_driver family15_northbridge __pci_driver = {
+ .ops = &northbridge_operations,
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_DEVICE_ID_AMD_15H_MODEL_707F_NB_HT,
+};
+
+void fam15_finalize(void *chip_info)
+{
+ device_t dev;
+ u32 value;
+ dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
+ pci_write_config32(dev, 0xF8, 0);
+ pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+
+ /* disable No Snoop */
+ dev = dev_find_slot(0, PCI_DEVFN(1, 1));
+ value = pci_read_config32(dev, 0x60);
+ value &= ~(1 << 11);
+ pci_write_config32(dev, 0x60, value);
+}
+
+void domain_read_resources(device_t dev)
+{
+ unsigned reg;
+
+ /* Find the already assigned resource pairs */
+ get_fx_dev();
+ for (reg = 0x80; reg <= 0xd8; reg += 0x08) {
+ u32 base, limit;
+ base = f1_read_config32(reg);
+ limit = f1_read_config32(reg + 0x04);
+ /* Is this register allocated? */
+ if ((base & 3) != 0) {
+ unsigned nodeid, reg_link;
+ device_t reg_dev;
+ if (reg < 0xc0) { // mmio
+ nodeid = (limit & 0xf) + (base & 0x30);
+ } else { // io
+ nodeid = (limit & 0xf) + ((base >> 4) & 0x30);
+ }
+ reg_link = (limit >> 4) & 7;
+ reg_dev = __f0_dev;
+ if (reg_dev) {
+ /* Reserve the resource */
+ struct resource *res;
+ res = new_resource(reg_dev, IOINDEX(0x1000 + reg, reg_link));
+ if (res) {
+ res->flags = 1;
+ }
+ }
+ }
+ }
+ /* FIXME: do we need to check extend conf space?
+ I don't believe that much preset value */
+
+ pci_domain_read_resources(dev);
+}
+
+void domain_enable_resources(device_t dev)
+{
+ if (acpi_is_wakeup_s3())
+ AGESAWRAPPER(fchs3laterestore);
+
+ /* Must be called after PCI enumeration and resource allocation */
+ if (!acpi_is_wakeup_s3())
+ AGESAWRAPPER(amdinitmid);
+
+ printk(BIOS_DEBUG, " ader - leaving domain_enable_resources.\n");
+}
+
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
+struct hw_mem_hole_info {
+ unsigned hole_startk;
+ int node_id;
+};
+
+static struct hw_mem_hole_info get_hw_mem_hole_info(void)
+{
+ struct hw_mem_hole_info mem_hole;
+ mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK;
+ mem_hole.node_id = -1;
+ dram_base_mask_t d;
+ u32 hole;
+ d = get_dram_base_mask(0);
+ hole = pci_read_config32(__f1_dev, 0xf0);
+ if (hole & 2) {
+ /* We found the hole */
+ mem_hole.hole_startk = (hole & (0xff << 24)) >> 10;
+ mem_hole.node_id = 0; // record the node # with hole
+ }
+
+ return mem_hole;
+}
+#endif
+
+void domain_set_resources(device_t dev)
+{
+ unsigned long mmio_basek;
+ u32 pci_tolm;
+ int i, idx;
+ struct bus *link;
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
+ struct hw_mem_hole_info mem_hole;
+ u32 reset_memhole = 1;
+#endif
+
+ pci_tolm = 0xffffffffUL;
+ for (link = dev->link_list; link; link = link->next) {
+ pci_tolm = find_pci_tolm(link);
+ }
+
+ mmio_basek = pci_tolm >> 10;
+ /* Round mmio_basek to something the processor can support */
+ mmio_basek &= ~((1 << 6) -1);
+
+ /* FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M
+ * MMIO hole. If you fix this here, please fix amdk8, too.
+ */
+ /* Round the mmio hole to 64M */
+ mmio_basek &= ~((64 * 1024) - 1);
+
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
+ /* if the hw mem hole is already set in raminit stage, here we will compare
+ * mmio_basek and hole_basek. if mmio_basek is bigger that hole_basek and will
+ * use hole_basek as mmio_basek and we don't need to reset hole.
+ * otherwise We reset the hole to the mmio_basek
+ */
+
+ mem_hole = get_hw_mem_hole_info();
+
+ /* Use hole_basek as mmio_basek, and we don't need to reset hole anymore */
+ if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) {
+ mmio_basek = mem_hole.hole_startk;
+ reset_memhole = 0;
+ }
+#endif
+
+ idx = 0x10;
+ for (i = 0; i < node_nums; i++) {
+ dram_base_mask_t d;
+ resource_t basek, limitk, sizek; // 4 1T
+
+ d = get_dram_base_mask(i);
+
+ if (!(d.mask & 1))
+ continue;
+ basek = ((resource_t)(d.base & 0x1fffff00)) << 9; // could overflow, we may lost 6 bit here
+ limitk = ((resource_t)(((d.mask & ~1) + 0x000FF) & 0x1fffff00)) << 9 ;
+
+ sizek = limitk - basek;
+
+ /* see if we need a hole from 0xa0000 to 0xbffff */
+ if ((basek < ((8 * 64) + (8 * 16))) && (sizek > ((8 * 64) + (16 * 16)))) {
+ ram_resource(dev, (idx | i), basek, ((8 * 64) + (8 * 16)) - basek);
+ idx += 0x10;
+ basek = (8 * 64) + (16 * 16);
+ sizek = limitk - ((8 * 64) + (16 * 16));
+
+ }
+
+ /* split the region to accommodate pci memory space */
+ if ((basek < 4 * 1024 * 1024 ) && (limitk > mmio_basek)) {
+ if (basek <= mmio_basek) {
+ unsigned pre_sizek;
+ pre_sizek = mmio_basek - basek;
+ if (pre_sizek>0) {
+ ram_resource(dev, (idx | i), basek, pre_sizek);
+ idx += 0x10;
+ sizek -= pre_sizek;
+ }
+ basek = mmio_basek;
+ }
+ if ((basek + sizek) <= 4 * 1024 * 1024) {
+ sizek = 0;
+ }
+ else {
+ uint64_t topmem2 = bsp_topmem2();
+ basek = 4 * 1024 * 1024;
+ sizek = topmem2 / 1024 - basek;
+ }
+ }
+
+ ram_resource(dev, (idx | i), basek, sizek);
+ idx += 0x10;
+ printk(BIOS_DEBUG, "node %d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n",
+ i, mmio_basek, basek, limitk);
+ }
+
+ add_uma_resource_below_tolm(dev, 7);
+
+ for (link = dev->link_list; link; link = link->next) {
+ if (link->children) {
+ assign_resources(link);
+ }
+ }
+ /*
+ * Reserve everything between A segment and 1MB:
+ *
+ * 0xa0000 - 0xbffff: legacy VGA
+ * 0xc0000 - 0xfffff: RAM
+ */
+ mmio_resource(dev, 0xa0000, 0xa0000 / KiB, 0x20000 / KiB);
+ reserved_ram_resource(dev, 0xc0000, 0xc0000 / KiB, 0x40000 / KiB);
+}
+
+static void sysconf_init(device_t dev) // first node
+{
+ sblink = (pci_read_config32(dev, 0x64) >> 8) & 7; // don't forget sublink1
+ node_nums = ((pci_read_config32(dev, 0x60) >> 4) & 7) + 1; // NodeCnt[2:0]
+}
+
+
+void cpu_bus_scan(device_t dev)
+{
+ struct bus *cpu_bus;
+ device_t cpu;
+ device_t cdb_dev;
+ device_t dev_mc;
+ int j;
+ int core_max;
+ int core_nums;
+ int siblings;
+ int family;
+ int enable_node;
+ u32 lapicid_start;
+ u32 apic_id;
+ u32 pccount;
+
+
+ dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0));
+ if (!dev_mc) {
+ printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB);
+ die("");
+ }
+ sysconf_init(dev_mc); /* sets global node_nums */
+
+ if (node_nums != 1)
+ die("node_nums != 1. This is an SOC. Something is terribly wrong.");
+
+ /* Get max and actual number of cores */
+ pccount = cpuid_ecx(AMD_CPUID_ASIZE_PCCOUNT);
+ core_max = 1 << ((pccount >> 12) & 0xF);
+ core_nums = (pccount & 0xF);
+
+ family = (cpuid_eax(1) >> 20) & 0xFF;
+
+ cdb_dev = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 5));
+ siblings = pci_read_config32(cdb_dev, 0x84) & 0xFF;
+
+ printk(BIOS_SPEW, "%s family%xh, core_max=%d, core_nums=%d, siblings=%d\n",
+ dev_path(cdb_dev), 0x0f + family, core_max, core_nums, siblings);
+
+ /*
+ * APIC ID calucation is tightly coupled with AGESA v5 code.
+ * This calculation MUST match the assignment calculation done
+ * in LocalApicInitializationAtEarly() function.
+ * And reference GetLocalApicIdForCore()
+ *
+ * Apply apic enumeration rules
+ * For systems with >= 16 APICs, put the IO-APICs at 0..n and
+ * put the local-APICs at m..z
+ *
+ * This is needed because many IO-APIC devices only have 4 bits
+ * for their APIC id and therefore must reside at 0..15
+ */
+
+ /*
+ * While the above statement is true, we know some things about
+ * this silicon. It is an SOC and can't have >= 16 APICs, but
+ * we will start numbering at 0x10. We also know there is only
+ * on physical node (module in AMD speak).
+ */
+
+ lapicid_start = 0x10; /* Get this from devicetree? see comment above. */
+ enable_node = cdb_dev && cdb_dev->enabled;
+ cpu_bus = dev->link_list;
+
+ for (j = 0; j <= siblings; j++ ) {
+ apic_id = lapicid_start + j;
+ printk(BIOS_SPEW, "lapicid_start 0x%x, node 0x%x, core 0x%x, apicid=0x%x\n",
+ lapicid_start, node_nums, j, apic_id);
+
+ cpu = add_cpu_device(cpu_bus, apic_id, enable_node);
+ if (cpu)
+ amd_cpu_topology(cpu, node_nums, j);
+ }
+}
+
+/*********************************************************************
+ * Change the vendor / device IDs to match the generic VBIOS header. *
+ *********************************************************************/
+u32 map_oprom_vendev(u32 vendev)
+{
+ u32 new_vendev;
+ new_vendev =
+ ((0x100298E0 <= vendev) && (vendev <= 0x100298EF)) ? 0x100298E0 : vendev;
+
+ if (vendev != new_vendev)
+ printk(BIOS_NOTICE, "Mapping PCI device %8x to %8x\n", vendev, new_vendev);
+
+ return new_vendev;
+}
diff --git a/src/soc/amd/stoneyridge/ramtop.c b/src/soc/amd/stoneyridge/ramtop.c
new file mode 100644
index 0000000000..8fa81c715a
--- /dev/null
+++ b/src/soc/amd/stoneyridge/ramtop.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define __SIMPLE_DEVICE__
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <cbmem.h>
+
+#define CBMEM_TOP_SCRATCHPAD 0x78
+
+void backup_top_of_low_cacheable(uintptr_t ramtop)
+{
+ uint16_t top_cache = ramtop >> 16;
+ pci_write_config16(PCI_DEV(0,0,0), CBMEM_TOP_SCRATCHPAD, top_cache);
+}
+
+uintptr_t restore_top_of_low_cacheable(void)
+{
+ uint16_t top_cache;
+ top_cache = pci_read_config16(PCI_DEV(0,0,0), CBMEM_TOP_SCRATCHPAD);
+ return (top_cache << 16);
+}
diff --git a/src/soc/amd/stoneyridge/smbus_spd.c b/src/soc/amd/stoneyridge/smbus_spd.c
index 8d67b1e678..863631a586 100644
--- a/src/soc/amd/stoneyridge/smbus_spd.c
+++ b/src/soc/amd/stoneyridge/smbus_spd.c
@@ -20,8 +20,7 @@
#include <Porting.h>
#include <AGESA.h>
#include <amdlib.h>
-
-#include <northbridge/amd/pi/dimmSpd.h>
+#include <dimmSpd.h>
/*-----------------------------------------------------------------------------
*