diff options
Diffstat (limited to 'src/soc/imgtec/pistachio/spi.h')
| -rw-r--r-- | src/soc/imgtec/pistachio/spi.h | 358 |
1 files changed, 358 insertions, 0 deletions
diff --git a/src/soc/imgtec/pistachio/spi.h b/src/soc/imgtec/pistachio/spi.h new file mode 100644 index 0000000000..91d6d558e5 --- /dev/null +++ b/src/soc/imgtec/pistachio/spi.h @@ -0,0 +1,358 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2014 Imagination Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef __SOC_IMGTEC_DANUBE_SPI_H__ +#define __SOC_IMGTEC_DANUBE_SPI_H__ + +#include <arch/types.h> +#include <arch/io.h> + +#define spi_read_reg_field(regval, field) \ +( \ + ((field##_MASK) == 0xFFFFFFFF) ? \ + (regval) : \ + (((regval) & (field##_MASK)) >> (field##_SHIFT))\ +) + +#define spi_write_reg_field(regval, field, val) \ +( \ + ((field##_MASK) == 0xFFFFFFFF) ? \ + (val) : \ + (((regval) & ~(field##_MASK)) | \ + (((val) << (field##_SHIFT)) & (field##_MASK))) \ +) + +/* + * Parameter register + * Each of these corresponds to a single port (ie CS line) in the interface + * Fields Name Description + * ====== ==== =========== + * b31:24 CLK_RATE Bit Clock rate = (24.576 * value / 512) MHz + * b23:16 CS_SETUP Chip Select setup = (40 * value) ns + * b15:8 CS_HOLD Chip Select hold = (40 * value) ns + * b7:0 CS_DELAY Chip Select delay = (40 * value) ns + */ + +#define SPIM_CLK_DIVIDE_MASK (0xFF000000) +#define SPIM_CS_SETUP_MASK (0x00FF0000) +#define SPIM_CS_HOLD_MASK (0x0000FF00) +#define SPIM_CS_DELAY_MASK (0x000000FF) +#define SPIM_CS_PARAM_MASK (SPIM_CS_SETUP_MASK \ + | SPIM_CS_HOLD_MASK \ + | SPIM_CS_DELAY_MASK) + +#define SPIM_CLK_DIVIDE_SHIFT (24) +#define SPIM_CS_SETUP_SHIFT (16) +#define SPIM_CS_HOLD_SHIFT (8) +#define SPIM_CS_DELAY_SHIFT (0) +#define SPIM_CS_PARAM_SHIFT (0) + +/* Control register */ + +#define SPFI_DRIBBLE_COUNT_MASK (0x000e0000) +#define SPFI_MEMORY_IF_MASK (0x00008000) +#define SPIM_BYTE_DELAY_MASK (0x00004000) +#define SPIM_CS_DEASSERT_MASK (0x00002000) +#define SPIM_CONTINUE_MASK (0x00001000) +#define SPIM_SOFT_RESET_MASK (0x00000800) +#define SPIM_SEND_DMA_MASK (0x00000400) +#define SPIM_GET_DMA_MASK (0x00000200) +#define SPIM_EDGE_TX_RX_MASK (0x00000100) +#define SPFI_TRNSFR_MODE_MASK (0x000000e0) +#define SPFI_TRNSFR_MODE_DQ_MASK (0x0000001c) +#define SPFI_TX_RX_MASK (0x00000002) +#define SPFI_EN_MASK (0x00000001) + +#define SPFI_DRIBBLE_COUNT_SHIFT (17) +#define SPFI_MEMORY_IF_SHIFT (15) +#define SPIM_BYTE_DELAY_SHIFT (14) +#define SPIM_CS_DEASSERT_SHIFT (13) +#define SPIM_CONTINUE_SHIFT (12) +#define SPIM_SOFT_RESET_SHIFT (11) +#define SPIM_SEND_DMA_SHIFT (10) +#define SPIM_GET_DMA_SHIFT (9) +#define SPIM_EDGE_TX_RX_SHIFT (8) +#define SPFI_TRNSFR_MODE_SHIFT (5) +#define SPFI_TRNSFR_MODE_DQ_SHIFT (2) +#define SPFI_TX_RX_SHIFT (1) +#define SPFI_EN_SHIFT (0) + +/* Transaction register */ + +#define SPFI_TSIZE_MASK (0xffff0000) +#define SPFI_CMD_LENGTH_MASK (0x0000e000) +#define SPFI_ADDR_LENGTH_MASK (0x00001c00) +#define SPFI_DUMMY_LENGTH_MASK (0x000003e0) +#define SPFI_PI_LENGTH_MASK (0x0000001c) + +#define SPFI_TSIZE_SHIFT (16) +#define SPFI_CMD_LENGTH_SHIFT (13) +#define SPFI_ADDR_LENGTH_SHIFT (10) +#define SPFI_DUMMY_LENGTH_SHIFT (5) +#define SPFI_PI_LENGTH_SHIFT (2) + +/* Port state register */ + +#define SPFI_PORT_SELECT_MASK (0x00700000) +/* WARNING the following bits are reversed */ +#define SPFI_CLOCK0_IDLE_MASK (0x000f8000) +#define SPFI_CLOCK0_PHASE_MASK (0x00007c00) +#define SPFI_CS0_IDLE_MASK (0x000003e0) +#define SPFI_DATA0_IDLE_MASK (0x0000001f) + +#define SPIM_CLOCK0_IDLE_MASK (0x000f8000) +#define SPIM_CLOCK0_PHASE_MASK (0x00007c00) +#define SPIM_CS0_IDLE_MASK (0x000003e0) +#define SPIM_DATA0_IDLE_MASK (0x0000001f) + +#define SPIM_PORT0_MASK (0x00084210) + +#define SPFI_PORT_SELECT_SHIFT (20) +/* WARNING the following bits are reversed, bit 0 is highest */ +#define SPFI_CLOCK0_IDLE_SHIFT (19) +#define SPFI_CLOCK0_PHASE_SHIFT (14) +#define SPFI_CS0_IDLE_SHIFT (9) +#define SPFI_DATA0_IDLE_SHIFT (4) + +#define SPIM_CLOCK0_IDLE_SHIFT (19) +#define SPIM_CLOCK0_PHASE_SHIFT (14) +#define SPIM_CS0_IDLE_SHIFT (9) +#define SPIM_DATA0_IDLE_SHIFT (4) + + +/* + * Interrupt registers + * SPFI_GDOF_MASK means Rx buffer full, not an overflow, because clock stalls + * SPFI_SDUF_MASK means Tx buffer empty, not an underflow, because clock stalls + */ +#define SPFI_IACCESS_MASK (0x00001000) +#define SPFI_GDEX8BIT_MASK (0x00000800) +#define SPFI_ALLDONE_MASK (0x00000200) +#define SPFI_GDFUL_MASK (0x00000100) +#define SPFI_GDHF_MASK (0x00000080) +#define SPFI_GDEX32BIT_MASK (0x00000040) +#define SPFI_GDTRIG_MASK (0x00000020) +#define SPFI_SDFUL_MASK (0x00000008) +#define SPFI_SDHF_MASK (0x00000004) +#define SPFI_SDE_MASK (0x00000002) +#define SPFI_SDTRIG_MASK (0x00000001) + +#define SPFI_IACCESS_SHIFT (12) +#define SPFI_GDEX8BIT_SHIFT (11) +#define SPFI_ALLDONE_SHIFT (9) +#define SPFI_GDFUL_SHIFT (8) +#define SPFI_GDHF_SHIFT (7) +#define SPFI_GDEX32BIT_SHIFT (6) +#define SPFI_GDTRIG_SHIFT (5) +#define SPFI_SDFUL_SHIFT (3) +#define SPFI_SDHF_SHIFT (2) +#define SPFI_SDE_SHIFT (1) +#define SPFI_SDTRIG_SHIFT (0) + + +/* SPFI register block */ + +#define SPFI_PORT_0_PARAM_REG_OFFSET (0x00) +#define SPFI_PORT_1_PARAM_REG_OFFSET (0x04) +#define SPFI_PORT_2_PARAM_REG_OFFSET (0x08) +#define SPFI_PORT_3_PARAM_REG_OFFSET (0x0C) +#define SPFI_PORT_4_PARAM_REG_OFFSET (0x10) +#define SPFI_CONTROL_REG_OFFSET (0x14) +#define SPFI_TRANSACTION_REG_OFFSET (0x18) +#define SPFI_PORT_STATE_REG_OFFSET (0x1C) + +#define SPFI_SEND_LONG_REG_OFFSET (0x20) +#define SPFI_SEND_BYTE_REG_OFFSET (0x24) +#define SPFI_GET_LONG_REG_OFFSET (0x28) +#define SPFI_GET_BYTE_REG_OFFSET (0x2C) + +#define SPFI_INT_STATUS_REG_OFFSET (0x30) +#define SPFI_INT_ENABLE_REG_OFFSET (0x34) +#define SPFI_INT_CLEAR_REG_OFFSET (0x38) + +#define SPFI_IMMEDIATE_STATUS_REG_OFFSET (0x3c) + +#define SPFI_FLASH_BASE_ADDRESS_REG_OFFSET (0x48) +#define SPFI_FLASH_STATUS_REG_OFFSET (0x4C) + +#define IMG_FALSE 0 +#define IMG_TRUE 1 + +/* Number of SPIM interfaces*/ +#define SPIM_NUM_BLOCKS 2 +/* Number of chip select lines supported by the SPI master port. */ +#define SPIM_NUM_PORTS_PER_BLOCK (SPIM_DUMMY_CS) +/* Maximum transfer size (in bytes) for the SPI master port. */ +#define SPIM_MAX_TRANSFER_BYTES (0xFFFF) +/* Maximum size of a flash command: command bytes+address_bytes. */ +#define SPIM_MAX_FLASH_COMMAND_BYTES (0x8) +/* Write operation to fifo done in blocks of 16 words (64 bytes) */ +#define SPIM_MAX_BLOCK_BYTES (0x40) +/* Number of tries until timeout error is returned*/ +#define SPI_TIMEOUT_VALUE_US 500000 + +/* SPIM initialisation function return value.*/ +enum spim_return { + /* Initialisation parameters are valid. */ + SPIM_OK = 0, + /* Mode parameter is invalid. */ + SPIM_INVALID_SPI_MODE, + /* Chip select idle level is invalid. */ + SPIM_INVALID_CS_IDLE_LEVEL, + /* Data idle level is invalid. */ + SPIM_INVALID_DATA_IDLE_LEVEL, + /* Chip select line parameter is invalid. */ + SPIM_INVALID_CS_LINE, + /* Transfer size parameter is invalid. */ + SPIM_INVALID_SIZE, + /* Read/write parameter is invalid. */ + SPIM_INVALID_READ_WRITE, + /* Continue parameter is invalid. */ + SPIM_INVALID_CONTINUE, + /* Invalid block index */ + SPIM_INVALID_BLOCK_INDEX, + /* Extended error values */ + /* Invalid bit rate */ + SPIM_INVALID_BIT_RATE, + /* Invalid CS hold value */ + SPIM_INVALID_CS_HOLD_VALUE, + /* API function called before API is initialised */ + SPIM_API_NOT_INITIALISED, + /* SPI driver initialisation failed */ + SPIM_DRIVER_INIT_ERROR, + /* Invalid transfer description */ + SPIM_INVALID_TRANSFER_DESC, + /* Timeout */ + SPIM_TIMEOUT + +}; + +/* This type defines the SPI Mode.*/ +enum spim_mode { + /* Mode 0 (clock idle low, data valid on first clock transition). */ + SPIM_MODE_0 = 0, + /* Mode 1 (clock idle low, data valid on second clock transition). */ + SPIM_MODE_1, + /* Mode 2 (clock idle high, data valid on first clock transition). */ + SPIM_MODE_2, + /* Mode 3 (clock idle high, data valid on second clock transition). */ + SPIM_MODE_3 + +}; + +/* This type defines the SPIM device numbers (chip select lines). */ +enum spim_device { + /* Device 0 (CS0). */ + SPIM_DEVICE0 = 0, + /* Device 1 (CS1). */ + SPIM_DEVICE1, + /* Device 2 (CS2). */ + SPIM_DEVICE2, + /* Device 3 (CS3). */ + SPIM_DEVICE3, + /* Device 4 (CS4). */ + SPIM_DEVICE4, + /* Dummy chip select. */ + SPIM_DUMMY_CS + +}; + +/* This structure defines communication parameters for a slave device */ +struct spim_device_parameters { + /* Bit rate value.*/ + unsigned char bitrate; + /* + * Chip select set up time. + * Time taken between chip select going active and activity occurring + * on the clock, calculated by dividing the desired set up time in ns + * by the Input clock period. (setup time / Input clock freq) + */ + unsigned char cs_setup; + /* + * Chip select hold time. + * Time after the last clock pulse before chip select goes inactive, + * calculated by dividing the desired hold time in ns by the + * Input clock period (hold time / Input clock freq). + */ + unsigned char cs_hold; + /* + * Chip select delay time (CS minimum inactive time). + * Minimum time after chip select goes inactive before chip select + * can go active again, calculated by dividing the desired delay time + * in ns by the Input clock period (delay time / Input clock freq). + */ + unsigned char cs_delay; + /* SPI Mode. */ + enum spim_mode spi_mode; + /* Chip select idle level (0=low, 1=high, Others=invalid). */ + unsigned int cs_idle_level; + /* Data idle level (0=low, 1=high, Others=invalid). */ + unsigned int data_idle_level; + +}; + +/* Command transfer mode */ +enum command_mode { + /* Command, address, dummy and PI cycles are transferred on sio0 */ + SPIM_CMD_MODE_0 = 0, + /* + * Command and Address are transferred on sio0 port only but dummy + * cycles and PI is transferred on all the interface ports. + */ + SPIM_CMD_MODE_1, + /* + * Command is transferred on sio0 port only but address, dummy + * and PI is transferred on all the interface portS + */ + SPIM_CMD_MODE_2, + /* + * Command, address, dummy and PI bytes are transferred on all + * the interfaces + */ + SPIM_CMD_MODE_3 +}; + +/* Data transfer mode */ +enum transfer_mode { + /* Transfer data in single mode */ + SPIM_DMODE_SINGLE = 0, + /* Transfer data in dual mode */ + SPIM_DMODE_DUAL, + /* Transfer data in quad mode */ + SPIM_DMODE_QUAD +}; + +/* This structure contains parameters that describe an SPIM operation. */ +struct spim_buffer { + /* The buffer to read from or write to. */ + unsigned char *buffer; + + /* Number of bytes to read/write. Valid range is 0 to 65536 bytes. */ + unsigned int size; + + /* Read/write select. TRUE for read, FALSE for write, Others-invalid.*/ + int isread; + + /* + * ByteDelay select. + * Selects whether or not a delay is inserted between bytes. + * 0 - Minimum inter-byte delay + * 1 - Inter-byte delay of (cs_hold/master_clk half period)*master_clk. + */ + int inter_byte_delay; +}; + +#endif /* __SOC_IMGTEC_DANUBE_SPI_H__ */ |