summaryrefslogtreecommitdiff
path: root/src/soc/intel/braswell/lpe.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/braswell/lpe.c')
-rw-r--r--src/soc/intel/braswell/lpe.c189
1 files changed, 189 insertions, 0 deletions
diff --git a/src/soc/intel/braswell/lpe.c b/src/soc/intel/braswell/lpe.c
new file mode 100644
index 0000000000..c23fdb2be6
--- /dev/null
+++ b/src/soc/intel/braswell/lpe.c
@@ -0,0 +1,189 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <reg_script.h>
+
+#include <soc/iomap.h>
+#include <soc/iosf.h>
+#include <soc/lpc.h>
+#include <soc/nvs.h>
+#include <soc/pattrs.h>
+#include <soc/pci_devs.h>
+#include <soc/pmc.h>
+#include <soc/ramstage.h>
+#include "chip.h"
+
+
+/* The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB
+ * address. Just take 1MiB @ 512MiB. */
+#define FIRMWARE_PHYS_BASE (512 << 20)
+#define FIRMWARE_PHYS_LENGTH (1 << 20)
+#define FIRMWARE_PCI_REG_BASE 0xa8
+#define FIRMWARE_PCI_REG_LENGTH 0xac
+#define FIRMWARE_REG_BASE_C0 0x144000
+#define FIRMWARE_REG_LENGTH_C0 (FIRMWARE_REG_BASE_C0 + 4)
+
+static void assign_device_nvs(device_t dev, u32 *field, unsigned index)
+{
+ struct resource *res;
+
+ res = find_resource(dev, index);
+ if (res)
+ *field = res->base;
+}
+
+static void lpe_enable_acpi_mode(device_t dev)
+{
+ static const struct reg_script ops[] = {
+ /* Disable PCI interrupt, enable Memory and Bus Master */
+ REG_PCI_OR32(PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | (1<<10)),
+ /* Enable ACPI mode */
+ REG_IOSF_OR(IOSF_PORT_0x58, LPE_PCICFGCTR1,
+ LPE_PCICFGCTR1_PCI_CFG_DIS |
+ LPE_PCICFGCTR1_ACPI_INT_EN),
+ REG_SCRIPT_END
+ };
+ global_nvs_t *gnvs;
+
+ /* Find ACPI NVS to update BARs */
+ gnvs = (global_nvs_t *)cbmem_find(CBMEM_ID_ACPI_GNVS);
+ if (!gnvs) {
+ printk(BIOS_ERR, "Unable to locate Global NVS\n");
+ return;
+ }
+
+ /* Save BAR0, BAR1, and firmware base to ACPI NVS */
+ assign_device_nvs(dev, &gnvs->dev.lpe_bar0, PCI_BASE_ADDRESS_0);
+ assign_device_nvs(dev, &gnvs->dev.lpe_bar1, PCI_BASE_ADDRESS_1);
+ assign_device_nvs(dev, &gnvs->dev.lpe_fw, FIRMWARE_PCI_REG_BASE);
+
+ /* Device is enabled in ACPI mode */
+ gnvs->dev.lpe_en = 1;
+
+ /* Put device in ACPI mode */
+ reg_script_run_on_dev(dev, ops);
+}
+
+static void setup_codec_clock(device_t dev)
+{
+ uint32_t reg;
+ u32 *clk_reg;
+ struct soc_intel_baytrail_config *config;
+ const char *freq_str;
+
+ config = dev->chip_info;
+ switch (config->lpe_codec_clk_freq) {
+ case 19:
+ freq_str = "19.2";
+ reg = CLK_FREQ_19P2MHZ;
+ break;
+ case 25:
+ freq_str = "25";
+ reg = CLK_FREQ_25MHZ;
+ break;
+ default:
+ printk(BIOS_DEBUG, "LPE codec clock not required.\n");
+ return;
+ }
+
+ /* Default to always running. */
+ reg |= CLK_CTL_ON;
+
+ if (config->lpe_codec_clk_num < 0 || config->lpe_codec_clk_num > 5) {
+ printk(BIOS_DEBUG, "Invalid LPE codec clock number.\n");
+ return;
+ }
+
+ printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str);
+
+ clk_reg = (u32 *)(PMC_BASE_ADDRESS + PLT_CLK_CTL_0);
+ clk_reg += config->lpe_codec_clk_num;
+
+ write32(clk_reg, (read32(clk_reg) & ~0x7) | reg);
+}
+
+static void lpe_stash_firmware_info(device_t dev)
+{
+ struct resource *res;
+ struct resource *mmio;
+ const struct pattrs *pattrs = pattrs_get();
+
+ res = find_resource(dev, FIRMWARE_PCI_REG_BASE);
+ if (res == NULL) {
+ printk(BIOS_DEBUG, "LPE Firmware memory not found.\n");
+ return;
+ }
+
+ /* Continue using old way of informing firmware address / size. */
+ pci_write_config32(dev, FIRMWARE_PCI_REG_BASE, res->base);
+ pci_write_config32(dev, FIRMWARE_PCI_REG_LENGTH, res->size);
+
+ /* C0 and later steppings use an offset in the MMIO space. */
+ if (pattrs->stepping >= STEP_C0) {
+ mmio = find_resource(dev, PCI_BASE_ADDRESS_0);
+ write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0),
+ res->base);
+ write32((u32 *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0),
+ res->size);
+ }
+}
+
+static void lpe_init(device_t dev)
+{
+ struct soc_intel_baytrail_config *config = dev->chip_info;
+
+ lpe_stash_firmware_info(dev);
+
+ setup_codec_clock(dev);
+
+ if (config->lpe_acpi_mode)
+ lpe_enable_acpi_mode(dev);
+}
+
+static void lpe_read_resources(device_t dev)
+{
+ pci_dev_read_resources(dev);
+
+ reserved_ram_resource(dev, FIRMWARE_PCI_REG_BASE,
+ FIRMWARE_PHYS_BASE >> 10,
+ FIRMWARE_PHYS_LENGTH >> 10);
+}
+
+static const struct device_operations device_ops = {
+ .read_resources = lpe_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = lpe_init,
+ .enable = NULL,
+ .scan_bus = NULL,
+ .ops_pci = &soc_pci_ops,
+};
+
+static const struct pci_driver southcluster __pci_driver = {
+ .ops = &device_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = LPE_DEVID,
+};