summaryrefslogtreecommitdiff
path: root/src/soc/intel/elkhartlake/cpu.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/elkhartlake/cpu.c')
-rw-r--r--src/soc/intel/elkhartlake/cpu.c213
1 files changed, 213 insertions, 0 deletions
diff --git a/src/soc/intel/elkhartlake/cpu.c b/src/soc/intel/elkhartlake/cpu.c
new file mode 100644
index 0000000000..382bbf7b01
--- /dev/null
+++ b/src/soc/intel/elkhartlake/cpu.c
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/intel/turbo.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <device/pci.h>
+#include <fsp/api.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/mp_init.h>
+#include <intelblocks/msr.h>
+#include <romstage_handoff.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+static void soc_fsp_load(void)
+{
+ fsps_load(romstage_handoff_is_resume());
+}
+
+static void configure_isst(void)
+{
+ config_t *conf = config_of_soc();
+ msr_t msr;
+
+ if (conf->speed_shift_enable) {
+ /*
+ * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
+ * is supported or not. coreboot needs to configure MSR 0x1AA
+ * which is then reflected in the CPUID register.
+ */
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
+ msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ } else {
+ msr = rdmsr(MSR_MISC_PWR_MGMT);
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
+ msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
+ wrmsr(MSR_MISC_PWR_MGMT, msr);
+ }
+}
+
+static void configure_misc(void)
+{
+ msr_t msr;
+
+ config_t *conf = config_of_soc();
+
+ msr = rdmsr(IA32_MISC_ENABLE);
+ msr.lo |= (1 << 0); /* Fast String enable */
+ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
+ wrmsr(IA32_MISC_ENABLE, msr);
+
+ /* Set EIST status */
+ cpu_set_eist(conf->eist_enable);
+
+ /* Disable Thermal interrupts */
+ msr.lo = 0;
+ msr.hi = 0;
+ wrmsr(IA32_THERM_INTERRUPT, msr);
+
+ /* Enable package critical interrupt only */
+ msr.lo = 1 << 4;
+ msr.hi = 0;
+ wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+
+ /* Enable PROCHOT */
+ msr = rdmsr(MSR_POWER_CTL);
+ msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input*/
+ msr.lo |= (1 << 23); /* Lock it */
+ wrmsr(MSR_POWER_CTL, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+ msr_t msr;
+
+ msr = rdmsr(MSR_PIC_MSG_CONTROL);
+ msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */
+ wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+ uint32_t feature_flag;
+ msr_t msr;
+
+ /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+ feature_flag = cpu_get_feature_flags_ecx();
+ if (feature_flag & CPUID_DCA) {
+ msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+ msr.lo |= 1;
+ wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+ }
+}
+
+static void enable_pm_timer_emulation(void)
+{
+ /* ACPI PM timer emulation */
+ msr_t msr;
+ /*
+ * The derived frequency is calculated as follows:
+ * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+ * Back solve the multiplier so the 3.579545MHz ACPI timer
+ * frequency is used.
+ */
+ msr.hi = (3579545ULL << 32) / CTC_FREQ;
+ /* Set PM1 timer IO port and enable */
+ msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
+ EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
+ wrmsr(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+ msr_t msr;
+ int ecx;
+
+ /* Determine if energy efficient policy is supported. */
+ ecx = cpuid_ecx(0x6);
+ if (!(ecx & (1 << 3)))
+ return;
+
+ /* Energy Policy is bits 3:0 */
+ msr = rdmsr(IA32_ENERGY_PERF_BIAS);
+ msr.lo &= ~0xf;
+ msr.lo |= policy & 0xf;
+ wrmsr(IA32_ENERGY_PERF_BIAS, msr);
+}
+
+/* All CPUs including BSP will run the following function. */
+void soc_core_init(struct device *cpu)
+{
+ /* Clear out pending MCEs */
+ /* TODO(adurbin): This should only be done on a cold boot. Also, some
+ * of these banks are core vs package scope. For now every CPU clears
+ * every bank. */
+ mca_configure();
+
+ /* Enable the local CPU apics */
+ enable_lapic_tpr();
+ setup_lapic();
+
+ /* Configure Enhanced SpeedStep and Thermal Sensors */
+ configure_misc();
+
+ /* Configure Intel Speed Shift */
+ configure_isst();
+
+ /* Enable PM timer emulation */
+ enable_pm_timer_emulation();
+
+ /* Enable Direct Cache Access */
+ configure_dca_cap();
+
+ /* Set energy policy */
+ set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+ /* Enable Turbo */
+ enable_turbo();
+}
+
+static void per_cpu_smm_trigger(void)
+{
+ /* Relocate the SMM handler. */
+ smm_relocate();
+}
+
+static void post_mp_init(void)
+{
+ /* Set Max Ratio */
+ cpu_set_max_ratio();
+
+ /*
+ * Now that all APs have been relocated as well as the BSP let SMIs
+ * start flowing.
+ */
+ global_smi_enable();
+}
+
+static const struct mp_ops mp_ops = {
+ /*
+ * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
+ * that are set prior to ramstage.
+ * Real MTRRs programming are being done after resource allocation.
+ */
+ .pre_mp_init = soc_fsp_load,
+ .get_cpu_count = get_cpu_count,
+ .get_smm_info = smm_info,
+ .get_microcode_info = get_microcode_info,
+ .pre_mp_smm_init = smm_initialize,
+ .per_cpu_smm_trigger = per_cpu_smm_trigger,
+ .relocation_handler = smm_relocation_handler,
+ .post_mp_init = post_mp_init,
+};
+
+void soc_init_cpus(struct bus *cpu_bus)
+{
+ if (mp_init_with_smm(cpu_bus, &mp_ops))
+ printk(BIOS_ERR, "MP initialization failure.\n");
+
+ /* Thermal throttle activation offset */
+ configure_tcc_thermal_target();
+}