diff options
Diffstat (limited to 'src/soc/intel/fsp_broadwell_de')
-rw-r--r-- | src/soc/intel/fsp_broadwell_de/Kconfig | 3 | ||||
-rw-r--r-- | src/soc/intel/fsp_broadwell_de/Makefile.inc | 3 | ||||
-rw-r--r-- | src/soc/intel/fsp_broadwell_de/spi.c | 626 |
3 files changed, 2 insertions, 630 deletions
diff --git a/src/soc/intel/fsp_broadwell_de/Kconfig b/src/soc/intel/fsp_broadwell_de/Kconfig index ec010b3882..7046ff04d4 100644 --- a/src/soc/intel/fsp_broadwell_de/Kconfig +++ b/src/soc/intel/fsp_broadwell_de/Kconfig @@ -12,12 +12,13 @@ config CPU_SPECIFIC_OPTIONS select ARCH_VERSTAGE_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_RAMSTAGE_X86_32 + select SOUTHBRIDGE_INTEL_COMMON + select SOUTHBRIDGE_INTEL_COMMON_SPI select SOUTHBRIDGE_INTEL_COMMON_RESET select NO_RELOCATABLE_RAMSTAGE select PARALLEL_MP select SMP select IOAPIC - select SPI_FLASH select UDELAY_TSC select SUPPORT_CPU_UCODE_IN_CBFS # Microcode header files are delivered in FSP package diff --git a/src/soc/intel/fsp_broadwell_de/Makefile.inc b/src/soc/intel/fsp_broadwell_de/Makefile.inc index 544819088d..f88cbba602 100644 --- a/src/soc/intel/fsp_broadwell_de/Makefile.inc +++ b/src/soc/intel/fsp_broadwell_de/Makefile.inc @@ -12,9 +12,6 @@ subdirs-y += ../../../lib/fsp subdirs-y += fsp romstage-y += gpio.c -romstage-y += spi.c - -ramstage-y += spi.c ramstage-y += cpu.c ramstage-y += chip.c ramstage-y += northcluster.c diff --git a/src/soc/intel/fsp_broadwell_de/spi.c b/src/soc/intel/fsp_broadwell_de/spi.c deleted file mode 100644 index a778aa927a..0000000000 --- a/src/soc/intel/fsp_broadwell_de/spi.c +++ /dev/null @@ -1,626 +0,0 @@ -/* - * Copyright (c) 2013 Google Inc. - * Copyright (C) 2015-2016 Intel Corp. - * Copyright (C) 2016 Siemens AG - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* This file is derived from the flashrom project. */ -#include <stdint.h> -#include <stdlib.h> -#include <string.h> -#include <delay.h> -#include <commonlib/helpers.h> -#include <arch/io.h> -#include <console/console.h> -#include <device/pci_ids.h> -#include <spi_flash.h> -#include <spi-generic.h> -#include <arch/early_variables.h> - -#ifdef __SMM__ -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#else /* !__SMM__ */ -#include <device/device.h> -#include <device/pci.h> -#define pci_read_config_byte(dev, reg, targ)\ - *(targ) = pci_read_config8(dev, reg) -#define pci_read_config_word(dev, reg, targ)\ - *(targ) = pci_read_config16(dev, reg) -#define pci_read_config_dword(dev, reg, targ)\ - *(targ) = pci_read_config32(dev, reg) -#define pci_write_config_byte(dev, reg, val)\ - pci_write_config8(dev, reg, val) -#define pci_write_config_word(dev, reg, val)\ - pci_write_config16(dev, reg, val) -#define pci_write_config_dword(dev, reg, val)\ - pci_write_config32(dev, reg, val) -#endif /* !__SMM__ */ - -typedef struct spi_slave ich_spi_slave; - -static int ichspi_lock CAR_GLOBAL = 0; - -typedef struct ich9_spi_regs { - uint32_t bfpr; - uint16_t hsfs; - uint16_t hsfc; - uint32_t faddr; - uint32_t _reserved0; - uint32_t fdata[16]; - uint32_t frap; - uint32_t freg[5]; - uint32_t _reserved1[3]; - uint32_t pr[5]; - uint32_t _reserved2[2]; - uint8_t ssfs; - uint8_t ssfc[3]; - uint16_t preop; - uint16_t optype; - uint8_t opmenu[8]; - uint32_t bbar; - uint8_t _reserved3[12]; - uint32_t fdoc; - uint32_t fdod; - uint8_t _reserved4[8]; - uint32_t afc; - uint32_t lvscc; - uint32_t uvscc; - uint8_t _reserved5[4]; - uint32_t fpb; - uint8_t _reserved6[28]; - uint32_t srdl; - uint32_t srdc; - uint32_t srd; -} __packed ich9_spi_regs; - -typedef struct ich_spi_controller { - int locked; - - uint8_t *opmenu; - int menubytes; - uint16_t *preop; - uint16_t *optype; - uint32_t *addr; - uint8_t *data; - unsigned databytes; - uint8_t *status; - uint16_t *control; - uint32_t *bbar; -} ich_spi_controller; - -static ich_spi_controller cntlr CAR_GLOBAL; - -enum { - SPIS_SCIP = 0x0001, - SPIS_GRANT = 0x0002, - SPIS_CDS = 0x0004, - SPIS_FCERR = 0x0008, - SSFS_AEL = 0x0010, - SPIS_LOCK = 0x8000, - SPIS_RESERVED_MASK = 0x7ff0, - SSFS_RESERVED_MASK = 0x7fe2 -}; - -enum { - SPIC_SCGO = 0x000002, - SPIC_ACS = 0x000004, - SPIC_SPOP = 0x000008, - SPIC_DBC = 0x003f00, - SPIC_DS = 0x004000, - SPIC_SME = 0x008000, - SSFC_SCF_MASK = 0x070000, - SSFC_RESERVED = 0xf80000 -}; - -enum { - HSFS_FDONE = 0x0001, - HSFS_FCERR = 0x0002, - HSFS_AEL = 0x0004, - HSFS_BERASE_MASK = 0x0018, - HSFS_BERASE_SHIFT = 3, - HSFS_SCIP = 0x0020, - HSFS_FDOPSS = 0x2000, - HSFS_FDV = 0x4000, - HSFS_FLOCKDN = 0x8000 -}; - -enum { - HSFC_FGO = 0x0001, - HSFC_FCYCLE_MASK = 0x0006, - HSFC_FCYCLE_SHIFT = 1, - HSFC_FDBC_MASK = 0x3f00, - HSFC_FDBC_SHIFT = 8, - HSFC_FSMIE = 0x8000 -}; - -enum { - SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, - SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, - SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, - SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 -}; - -#define SPI_OFFSET_MASK 0x3ff - -static uint8_t readb_(const void *addr) -{ - uint8_t v = read8(addr); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: read %2.2x from %4.4x\n", - v, ((uint32_t) addr) & SPI_OFFSET_MASK); - } - return v; -} - -static uint16_t readw_(const void *addr) -{ - uint16_t v = read16(addr); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: read %4.4x from %4.4x\n", - v, ((uint32_t) addr) & SPI_OFFSET_MASK); - } - return v; -} - -static uint32_t readl_(const void *addr) -{ - uint32_t v = read32(addr); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: read %8.8x from %4.4x\n", - v, ((uint32_t) addr) & SPI_OFFSET_MASK); - } - return v; -} - -static void writeb_(uint8_t b, void *addr) -{ - write8(addr, b); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: wrote %2.2x to %4.4x\n", - b, ((uint32_t) addr) & SPI_OFFSET_MASK); - } -} - -static void writew_(uint16_t b, void *addr) -{ - write16(addr, b); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: wrote %4.4x to %4.4x\n", - b, ((uint32_t) addr) & SPI_OFFSET_MASK); - } -} - -static void writel_(uint32_t b, void *addr) -{ - write32(addr, b); - if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) { - printk(BIOS_DEBUG, "SPI: wrote %8.8x to %4.4x\n", - b, ((uint32_t) addr) & SPI_OFFSET_MASK); - } -} - -static void write_reg(const void *value, void *dest, uint32_t size) -{ - const uint8_t *bvalue = value; - uint8_t *bdest = dest; - - while (size >= 4) { - writel_(*(const uint32_t *)bvalue, bdest); - bdest += 4; bvalue += 4; size -= 4; - } - while (size) { - writeb_(*bvalue, bdest); - bdest++; bvalue++; size--; - } -} - -static void read_reg(const void *src, void *value, uint32_t size) -{ - const uint8_t *bsrc = src; - uint8_t *bvalue = value; - - while (size >= 4) { - *(uint32_t *)bvalue = readl_(bsrc); - bsrc += 4; bvalue += 4; size -= 4; - } - while (size) { - *bvalue = readb_(bsrc); - bsrc++; bvalue++; size--; - } -} - -static void ich_set_bbar(uint32_t minaddr) -{ - const uint32_t bbar_mask = 0x00ffff00; - uint32_t ichspi_bbar; - - minaddr &= bbar_mask; - ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask; - ichspi_bbar |= minaddr; - writel_(ichspi_bbar, cntlr.bbar); -} - -void spi_init(void) -{ - uint8_t *rcrb; /* Root Complex Register Block */ - uint32_t rcba; /* Root Complex Base Address */ - uint8_t bios_cntl; - ich9_spi_regs *ich9_spi; - -#if defined(__SIMPLE_DEVICE__) - pci_devfn_t dev = PCI_DEV(0, 31, 0); -#else - struct device *dev; - dev = dev_find_slot(0, PCI_DEVFN(31, 0)); -#endif - - pci_read_config_dword(dev, 0xf0, &rcba); - /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ - rcrb = (uint8_t *)(rcba & 0xffffc000); - ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800); - ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN; - cntlr.opmenu = ich9_spi->opmenu; - cntlr.menubytes = sizeof(ich9_spi->opmenu); - cntlr.optype = &ich9_spi->optype; - cntlr.addr = &ich9_spi->faddr; - cntlr.data = (uint8_t *)ich9_spi->fdata; - cntlr.databytes = sizeof(ich9_spi->fdata); - cntlr.status = &ich9_spi->ssfs; - cntlr.control = (uint16_t *)ich9_spi->ssfc; - cntlr.bbar = &ich9_spi->bbar; - cntlr.preop = &ich9_spi->preop; - ich_set_bbar(0); - - /* Disable the BIOS write protect so write commands are allowed. */ - pci_read_config_byte(dev, 0xdc, &bios_cntl); - bios_cntl &= ~(1 << 5); - pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1); -} - -typedef struct spi_transaction { - const uint8_t *out; - uint32_t bytesout; - uint8_t *in; - uint32_t bytesin; - uint8_t type; - uint8_t opcode; - uint32_t offset; -} spi_transaction; - -static inline void spi_use_out(spi_transaction *trans, unsigned bytes) -{ - trans->out += bytes; - trans->bytesout -= bytes; -} - -static inline void spi_use_in(spi_transaction *trans, unsigned bytes) -{ - trans->in += bytes; - trans->bytesin -= bytes; -} - -static void spi_setup_type(spi_transaction *trans) -{ - trans->type = 0xFF; - - /* Try to guess spi type from read/write sizes. */ - if (trans->bytesin == 0) { - if (trans->bytesout > 4) - /* - * If bytesin = 0 and bytesout > 4, we presume this is - * a write data operation, which is accompanied by an - * address. - */ - trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; - else - trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; - return; - } - - if (trans->bytesout == 1) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; - return; - } - - if (trans->bytesout == 4) { /* and bytesin is > 0 */ - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - } - - /* Fast read command is called with 5 bytes instead of 4 */ - if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { - trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; - --trans->bytesout; - } -} - -static int spi_setup_opcode(spi_transaction *trans) -{ - uint16_t optypes; - uint8_t opmenu[cntlr.menubytes]; - - trans->opcode = trans->out[0]; - spi_use_out(trans, 1); - if (!ichspi_lock) { - /* The lock is off, so just use index 0. */ - writeb_(trans->opcode, cntlr.opmenu); - optypes = readw_(cntlr.optype); - optypes = (optypes & 0xfffc) | (trans->type & 0x3); - writew_(optypes, cntlr.optype); - return 0; - } else { - /* The lock is on. See if what we need is on the menu. */ - uint8_t optype; - uint16_t opcode_index; - - /* Write Enable is handled as atomic prefix */ - if (trans->opcode == SPI_OPCODE_WREN) - return 0; - - read_reg(cntlr.opmenu, opmenu, sizeof(opmenu)); - for (opcode_index = 0; opcode_index < cntlr.menubytes; - opcode_index++) { - if (opmenu[opcode_index] == trans->opcode) - break; - } - - if (opcode_index == cntlr.menubytes) { - printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n", - trans->opcode); - return -1; - } - - optypes = readw_(cntlr.optype); - optype = (optypes >> (opcode_index * 2)) & 0x3; - if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && - optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && - trans->bytesout >= 3) { - /* We guessed wrong earlier. Fix it up. */ - trans->type = optype; - } - if (optype != trans->type) { - printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n", - optype); - return -1; - } - return opcode_index; - } -} - -static int spi_setup_offset(spi_transaction *trans) -{ - /* Separate the SPI address and data. */ - switch (trans->type) { - case SPI_OPCODE_TYPE_READ_NO_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: - return 0; - case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: - case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: - trans->offset = ((uint32_t)trans->out[0] << 16) | - ((uint32_t)trans->out[1] << 8) | - ((uint32_t)trans->out[2] << 0); - spi_use_out(trans, 3); - return 1; - default: - printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type); - return -1; - } -} - -/* - * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set - * below is True) or 0. In case the wait was for the bit(s) to set - write - * those bits back, which would cause resetting them. - * - * Return the last read status value on success or -1 on failure. - */ -static int ich_status_poll(uint16_t bitmask, int wait_til_set) -{ - int timeout = 40000; /* This will result in 400 ms */ - uint16_t status = 0; - - while (timeout--) { - status = readw_(cntlr.status); - if (wait_til_set ^ ((status & bitmask) == 0)) { - if (wait_til_set) - writew_((status & bitmask), cntlr.status); - return status; - } - udelay(10); - } - - printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n", - status, bitmask); - return -1; -} - -static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, - size_t bytesout, void *din, size_t bytesin) -{ - uint16_t control; - int16_t opcode_index; - int with_address; - int status; - - spi_transaction trans = { - dout, bytesout, - din, bytesin, - 0xff, 0xff, 0 - }; - - /* There has to always at least be an opcode. */ - if (!bytesout || !dout) { - printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n"); - return -1; - } - /* Make sure if we read something we have a place to put it. */ - if (bytesin != 0 && !din) { - printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n"); - return -1; - } - - if (ich_status_poll(SPIS_SCIP, 0) == -1) - return -1; - - writew_(SPIS_CDS | SPIS_FCERR, cntlr.status); - - spi_setup_type(&trans); - opcode_index = spi_setup_opcode(&trans); - if (opcode_index < 0) - return -1; - with_address = spi_setup_offset(&trans); - if (with_address < 0) - return -1; - - if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) { - /* - * Treat Write Enable as Atomic Pre-Op if possible - * in order to prevent the Management Engine from - * issuing a transaction between WREN and DATA. - */ - writew_(trans.opcode, cntlr.preop); - return 0; - } - - /* Preset control fields */ - control = SPIC_SCGO | ((opcode_index & 0x07) << 4); - - /* Issue atomic preop cycle if needed */ - if (readw_(cntlr.preop)) - control |= SPIC_ACS; - - if (!trans.bytesout && !trans.bytesin) { - /* SPI addresses are 24 bit only */ - if (with_address) - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - /* - * This is a 'no data' command (like Write Enable), its - * bitesout size was 1, decremented to zero while executing - * spi_setup_opcode() above. Tell the chip to send the - * command. - */ - writew_(control, cntlr.control); - - /* wait for the result */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n"); - return -1; - } - - goto spi_xfer_exit; - } - - /* - * Check if this is a write command attempting to transfer more bytes - * than the controller can handle. Iterations for writes are not - * supported here because each SPI write command needs to be preceded - * and followed by other SPI commands, and this sequence is controlled - * by the SPI chip driver. - */ - if (trans.bytesout > cntlr.databytes) { - printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use" - " spi_crop_chunk()?\n"); - return -1; - } - - /* - * Read or write up to databytes bytes at a time until everything has - * been sent. - */ - while (trans.bytesout || trans.bytesin) { - uint32_t data_length; - - /* SPI addresses are 24 bit only */ - writel_(trans.offset & 0x00FFFFFF, cntlr.addr); - - if (trans.bytesout) - data_length = min(trans.bytesout, cntlr.databytes); - else - data_length = min(trans.bytesin, cntlr.databytes); - - /* Program data into FDATA0 to N */ - if (trans.bytesout) { - write_reg(trans.out, cntlr.data, data_length); - spi_use_out(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - - /* Add proper control fields' values */ - control &= ~((cntlr.databytes - 1) << 8); - control |= SPIC_DS; - control |= (data_length - 1) << 8; - - /* write it */ - writew_(control, cntlr.control); - - /* Wait for Cycle Done Status or Flash Cycle Error. */ - status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); - if (status == -1) - return -1; - - if (status & SPIS_FCERR) { - printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n"); - return -1; - } - - if (trans.bytesin) { - read_reg(cntlr.data, trans.in, data_length); - spi_use_in(&trans, data_length); - if (with_address) - trans.offset += data_length; - } - } - -spi_xfer_exit: - /* Clear atomic preop now that xfer is done */ - writew_(0, cntlr.preop); - - return 0; -} - -static int xfer_vectors(const struct spi_slave *slave, - struct spi_op vectors[], size_t count) -{ - return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer); -} - -static const struct spi_ctrlr spi_ctrlr = { - .xfer_vector = xfer_vectors, - .max_xfer_size = member_size(ich9_spi_regs, fdata), -}; - -const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { - { - .ctrlr = &spi_ctrlr, - .bus_start = 0, - .bus_end = 0, - }, -}; - -const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map); |