summaryrefslogtreecommitdiff
path: root/src/soc/intel/icelake/pmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/icelake/pmc.c')
-rw-r--r--src/soc/intel/icelake/pmc.c65
1 files changed, 10 insertions, 55 deletions
diff --git a/src/soc/intel/icelake/pmc.c b/src/soc/intel/icelake/pmc.c
index b1c66b9efc..a66d01fb10 100644
--- a/src/soc/intel/icelake/pmc.c
+++ b/src/soc/intel/icelake/pmc.c
@@ -29,35 +29,22 @@
* Set which power state system will be after reapplying
* the power (from G3 State)
*/
-static void pmc_set_afterg3(int s5pwr)
+void pmc_soc_set_afterg3_en(const bool on)
{
uint8_t reg8;
- uint8_t *pmcbase = pmc_mmio_regs();
+ uint8_t *const pmcbase = pmc_mmio_regs();
reg8 = read8(pmcbase + GEN_PMCON_A);
-
- switch (s5pwr) {
- case MAINBOARD_POWER_STATE_OFF:
- reg8 |= 1;
- break;
- case MAINBOARD_POWER_STATE_ON:
- reg8 &= ~1;
- break;
- case MAINBOARD_POWER_STATE_PREVIOUS:
- default:
- break;
- }
-
+ if (on)
+ reg8 &= ~SLEEP_AFTER_POWER_FAIL;
+ else
+ reg8 |= SLEEP_AFTER_POWER_FAIL;
write8(pmcbase + GEN_PMCON_A, reg8);
}
-/*
- * Set PMC register to know which state system should be after
- * power reapplied
- */
void pmc_soc_restore_power_failure(void)
{
- pmc_set_afterg3(CONFIG_MAINBOARD_POWER_FAILURE_STATE);
+ pmc_set_power_failure_state(false);
}
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
@@ -101,46 +88,14 @@ static void config_deep_sx(uint32_t deepsx_config)
write32(pmcbase + DSX_CFG, reg);
}
-static void pch_power_options(void)
-{
- const char *state;
-
- const int pwr_on = CONFIG_MAINBOARD_POWER_FAILURE_STATE;
-
- /*
- * Which state do we want to goto after g3 (power restored)?
- * 0 == S5 Soft Off
- * 1 == S0 Full On
- * 2 == Keep Previous State
- */
- switch (pwr_on) {
- case MAINBOARD_POWER_STATE_OFF:
- state = "off";
- break;
- case MAINBOARD_POWER_STATE_ON:
- state = "on";
- break;
- case MAINBOARD_POWER_STATE_PREVIOUS:
- state = "state keep";
- break;
- default:
- state = "undefined";
- }
- pmc_set_afterg3(pwr_on);
- printk(BIOS_INFO, "Set power %s after power failure.\n", state);
-
- /* Set up GPE configuration. */
- pmc_gpe_init();
-}
-
static void pmc_init(void *unused)
{
- config_t *config = config_of_path(SA_DEVFN_ROOT);
+ const config_t *config = config_of_path(SA_DEVFN_ROOT);
rtc_init();
- /* Initialize power management */
- pch_power_options();
+ pmc_set_power_failure_state(true);
+ pmc_gpe_init();
pmc_set_acpi_mode();