summaryrefslogtreecommitdiff
path: root/src/soc/intel/quark
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/quark')
-rw-r--r--src/soc/intel/quark/Makefile.inc2
-rw-r--r--src/soc/intel/quark/gpio_i2c.c152
-rw-r--r--src/soc/intel/quark/i2c.c176
3 files changed, 178 insertions, 152 deletions
diff --git a/src/soc/intel/quark/Makefile.inc b/src/soc/intel/quark/Makefile.inc
index 08325e7023..d7470797fa 100644
--- a/src/soc/intel/quark/Makefile.inc
+++ b/src/soc/intel/quark/Makefile.inc
@@ -18,6 +18,7 @@ ifeq ($(CONFIG_SOC_INTEL_QUARK),y)
subdirs-y += romstage
subdirs-y += ../../../cpu/x86/tsc
+romstage-y += i2c.c
romstage-y += memmap.c
romstage-y += reg_access.c
romstage-y += tsc_freq.c
@@ -27,6 +28,7 @@ ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
ramstage-y += chip.c
ramstage-y += ehci.c
ramstage-y += gpio_i2c.c
+ramstage-y += i2c.c
ramstage-y += lpc.c
ramstage-y += memmap.c
ramstage-y += northcluster.c
diff --git a/src/soc/intel/quark/gpio_i2c.c b/src/soc/intel/quark/gpio_i2c.c
index d23a90553c..5580894ee1 100644
--- a/src/soc/intel/quark/gpio_i2c.c
+++ b/src/soc/intel/quark/gpio_i2c.c
@@ -23,158 +23,6 @@
#include <soc/ramstage.h>
#include <soc/reg_access.h>
-static void i2c_disable(I2C_REGS *regs)
-{
- uint32_t status;
- uint32_t timeout;
-
- /* Disable I2C controller */
- regs->ic_enable = 0;
-
- /* Wait for the enable bit to clear */
- timeout = 1 * 1000 * 1000;
- status = regs->ic_enable_status;
- while (status & IC_ENABLE_CONTROLLER) {
- udelay(1);
- if (--timeout == 0)
- die("ERROR - I2C failed to disable!\n");
- status = regs->ic_enable_status;
- }
-
- /* Clear any pending interrupts */
- status = regs->ic_clr_intr;
-}
-
-int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
-{
- uint8_t *buffer;
- int bytes_transferred;
- uint8_t chip;
- uint32_t cmd;
- int length;
- int read_length;
- I2C_REGS *regs;
- uint32_t status;
- uint32_t timeout;
-
- regs = get_i2c_address();
-
- /* Disable the I2C controller to get access to the registers */
- i2c_disable(regs);
-
- /* Set the slave address */
- ASSERT (count > 0);
- ASSERT (segments != NULL);
- ASSERT (segments->read == 0);
-
- /* Clear the start and stop detection */
- status = regs->ic_clr_start_det;
- status = regs->ic_clr_stop_det;
-
- /* Set addressing mode to 7-bit and fast mode */
- cmd = regs->ic_con;
- cmd &= ~(IC_CON_10B | IC_CON_SPEED);
- cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_100_KHz
- | IC_CON_MASTER_MODE;
- regs->ic_con = cmd;
-
- /* Set the target chip address */
- chip = segments->chip;
- regs->ic_tar = chip;
-
- /* Enable the I2C controller */
- regs->ic_enable = IC_ENABLE_CONTROLLER;
-
- /* Clear the interrupts */
- status = regs->ic_clr_rx_under;
- status = regs->ic_clr_rx_over;
- status = regs->ic_clr_tx_over;
- status = regs->ic_clr_tx_abrt;
-
- /* Process each of the segments */
- bytes_transferred = 0;
- read_length = 0;
- buffer = NULL;
- while (count-- > 0) {
- buffer = segments->buf;
- length = segments->len;
- ASSERT (buffer != NULL);
- ASSERT (length >= 1);
- ASSERT (segments->chip = chip);
-
- if (segments->read) {
- /* Place read commands into the FIFO */
- read_length = length;
- while (length > 0) {
- /* Send stop bit after last byte */
- cmd = IC_DATA_CMD_READ;
- if ((count == 0) && (length == 1))
- cmd |= IC_DATA_CMD_STOP;
-
- /* Place read command in transmit FIFO */
- regs->ic_data_cmd = cmd;
- length--;
- }
- } else {
- /* Write the data into the FIFO */
- while (length > 0) {
- /* End of the transaction? */
- cmd = IC_DATA_CMD_WRITE | *buffer++;
- if ((count == 0) && (length == 1))
- cmd |= IC_DATA_CMD_STOP;
-
- /* Place a data byte into the FIFO */
- regs->ic_data_cmd = cmd;
- length--;
- bytes_transferred++;
- }
- }
- segments++;
- }
-
- /* Wait for the end of the transaction */
- timeout = 1 * 1000 * 1000;
- do {
- status = regs->ic_raw_intr_stat;
- if (status & IC_INTR_STOP_DET)
- break;
- if ((status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
- | IC_INTR_TX_ABRT | IC_INTR_TX_OVER))
- || (timeout == 0)) {
- if (timeout == 0)
- printk (BIOS_ERR,
- "ERROR - I2C stop bit not received!\n");
- if (status & IC_INTR_RX_OVER)
- printk (BIOS_ERR,
- "ERROR - I2C receive overrun!\n");
- if (status & IC_INTR_RX_UNDER)
- printk (BIOS_ERR,
- "ERROR - I2C receive underrun!\n");
- if (status & IC_INTR_TX_ABRT)
- printk (BIOS_ERR,
- "ERROR - I2C transmit abort!\n");
- if (status & IC_INTR_TX_OVER)
- printk (BIOS_ERR,
- "ERROR - I2C transmit overrun!\n");
- i2c_disable(regs);
- return -1;
- }
- timeout--;
- udelay(1);
- } while(1);
-
- /* Finish reading the data bytes */
- while (read_length > 0) {
- status = regs->ic_status;
- *buffer++ = (UINT8)regs->ic_data_cmd;
- read_length--;
- bytes_transferred++;
- status = regs->ic_status;
- }
-
- return bytes_transferred;
-}
-
__attribute__((weak)) void mainboard_gpio_i2c_init(device_t dev)
{
/* Initialize any of the GPIOs or I2C devices */
diff --git a/src/soc/intel/quark/i2c.c b/src/soc/intel/quark/i2c.c
new file mode 100644
index 0000000000..118cbea5c3
--- /dev/null
+++ b/src/soc/intel/quark/i2c.c
@@ -0,0 +1,176 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2016 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <delay.h>
+#include <device/device.h>
+#include <device/i2c.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <soc/i2c.h>
+#include <soc/ramstage.h>
+#include <soc/reg_access.h>
+
+static void i2c_disable(I2C_REGS *regs)
+{
+ uint32_t status;
+ uint32_t timeout;
+
+ /* Disable I2C controller */
+ regs->ic_enable = 0;
+
+ /* Wait for the enable bit to clear */
+ timeout = 1 * 1000 * 1000;
+ status = regs->ic_enable_status;
+ while (status & IC_ENABLE_CONTROLLER) {
+ udelay(1);
+ if (--timeout == 0)
+ die("ERROR - I2C failed to disable!\n");
+ status = regs->ic_enable_status;
+ }
+
+ /* Clear any pending interrupts */
+ status = regs->ic_clr_intr;
+}
+
+int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count)
+{
+ uint8_t *buffer;
+ int bytes_transferred;
+ uint8_t chip;
+ uint32_t cmd;
+ int length;
+ int read_length;
+ I2C_REGS *regs;
+ uint32_t status;
+ uint32_t timeout;
+
+ regs = get_i2c_address();
+
+ /* Disable the I2C controller to get access to the registers */
+ i2c_disable(regs);
+
+ /* Set the slave address */
+ ASSERT (count > 0);
+ ASSERT (segments != NULL);
+ ASSERT (segments->read == 0);
+
+ /* Clear the start and stop detection */
+ status = regs->ic_clr_start_det;
+ status = regs->ic_clr_stop_det;
+
+ /* Set addressing mode to 7-bit and fast mode */
+ cmd = regs->ic_con;
+ cmd &= ~(IC_CON_10B | IC_CON_SPEED);
+ cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_100_KHz
+ | IC_CON_MASTER_MODE;
+ regs->ic_con = cmd;
+
+ /* Set the target chip address */
+ chip = segments->chip;
+ regs->ic_tar = chip;
+
+ /* Enable the I2C controller */
+ regs->ic_enable = IC_ENABLE_CONTROLLER;
+
+ /* Clear the interrupts */
+ status = regs->ic_clr_rx_under;
+ status = regs->ic_clr_rx_over;
+ status = regs->ic_clr_tx_over;
+ status = regs->ic_clr_tx_abrt;
+
+ /* Process each of the segments */
+ bytes_transferred = 0;
+ read_length = 0;
+ buffer = NULL;
+ while (count-- > 0) {
+ buffer = segments->buf;
+ length = segments->len;
+ ASSERT (buffer != NULL);
+ ASSERT (length >= 1);
+ ASSERT (segments->chip = chip);
+
+ if (segments->read) {
+ /* Place read commands into the FIFO */
+ read_length = length;
+ while (length > 0) {
+ /* Send stop bit after last byte */
+ cmd = IC_DATA_CMD_READ;
+ if ((count == 0) && (length == 1))
+ cmd |= IC_DATA_CMD_STOP;
+
+ /* Place read command in transmit FIFO */
+ regs->ic_data_cmd = cmd;
+ length--;
+ }
+ } else {
+ /* Write the data into the FIFO */
+ while (length > 0) {
+ /* End of the transaction? */
+ cmd = IC_DATA_CMD_WRITE | *buffer++;
+ if ((count == 0) && (length == 1))
+ cmd |= IC_DATA_CMD_STOP;
+
+ /* Place a data byte into the FIFO */
+ regs->ic_data_cmd = cmd;
+ length--;
+ bytes_transferred++;
+ }
+ }
+ segments++;
+ }
+
+ /* Wait for the end of the transaction */
+ timeout = 1 * 1000 * 1000;
+ do {
+ status = regs->ic_raw_intr_stat;
+ if (status & IC_INTR_STOP_DET)
+ break;
+ if ((status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER
+ | IC_INTR_TX_ABRT | IC_INTR_TX_OVER))
+ || (timeout == 0)) {
+ if (timeout == 0)
+ printk (BIOS_ERR,
+ "ERROR - I2C stop bit not received!\n");
+ if (status & IC_INTR_RX_OVER)
+ printk (BIOS_ERR,
+ "ERROR - I2C receive overrun!\n");
+ if (status & IC_INTR_RX_UNDER)
+ printk (BIOS_ERR,
+ "ERROR - I2C receive underrun!\n");
+ if (status & IC_INTR_TX_ABRT)
+ printk (BIOS_ERR,
+ "ERROR - I2C transmit abort!\n");
+ if (status & IC_INTR_TX_OVER)
+ printk (BIOS_ERR,
+ "ERROR - I2C transmit overrun!\n");
+ i2c_disable(regs);
+ return -1;
+ }
+ timeout--;
+ udelay(1);
+ } while(1);
+
+ /* Finish reading the data bytes */
+ while (read_length > 0) {
+ status = regs->ic_status;
+ *buffer++ = (UINT8)regs->ic_data_cmd;
+ read_length--;
+ bytes_transferred++;
+ status = regs->ic_status;
+ }
+
+ return bytes_transferred;
+}