diff options
Diffstat (limited to 'src/soc/intel/tigerlake/chip.h')
| -rw-r--r-- | src/soc/intel/tigerlake/chip.h | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/src/soc/intel/tigerlake/chip.h b/src/soc/intel/tigerlake/chip.h new file mode 100644 index 0000000000..32dc02c666 --- /dev/null +++ b/src/soc/intel/tigerlake/chip.h @@ -0,0 +1,280 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_CHIP_H_ +#define _SOC_CHIP_H_ + +#include <intelblocks/cfg.h> +#include <drivers/i2c/designware/dw_i2c.h> +#include <intelblocks/gpio.h> +#include <intelblocks/gspi.h> +#include <stdint.h> +#include <soc/gpe.h> +#include <soc/gpio.h> +#include <soc/pch.h> +#include <soc/gpio_defs.h> +#include <soc/pci_devs.h> +#include <soc/pmc.h> +#include <soc/serialio.h> +#include <soc/usb.h> + +struct soc_intel_tigerlake_config { + + /* Common struct containing soc config data required by common code */ + struct soc_intel_common_config common_soc_config; + + /* GPE configuration */ + uint32_t gpe0_en_1; /* GPE0_EN_31_0 */ + uint32_t gpe0_en_2; /* GPE0_EN_63_32 */ + uint32_t gpe0_en_3; /* GPE0_EN_95_64 */ + uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */ + + /* Gpio group routed to each dword of the GPE0 block. Values are + * of the form GPP_[A:G] or GPD. */ + uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */ + uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */ + uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */ + + /* Generic IO decode ranges */ + uint32_t gen1_dec; + uint32_t gen2_dec; + uint32_t gen3_dec; + uint32_t gen4_dec; + + /* Enable S0iX support */ + int s0ix_enable; + /* Enable DPTF support */ + int dptf_enable; + + /* Deep SX enable for both AC and DC */ + int deep_s3_enable_ac; + int deep_s3_enable_dc; + int deep_s5_enable_ac; + int deep_s5_enable_dc; + + /* Deep Sx Configuration + * DSX_EN_WAKE_PIN - Enable WAKE# pin + * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin + * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ + uint32_t deep_sx_config; + + /* TCC activation offset */ + uint32_t tcc_offset; + + uint64_t PlatformMemorySize; + uint8_t SmramMask; + uint8_t MrcFastBoot; + uint32_t TsegSize; + uint16_t MmioSize; + + /* DDR Frequency Limit. Maximum Memory Frequency Selections in Mhz. + * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ + uint16_t DdrFreqLimit; + + /* SAGV Low Frequency Selections in Mhz. + * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ + uint16_t FreqSaGvLow; + + /* SAGV Mid Frequency Selections in Mhz. + * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */ + uint16_t FreqSaGvMid; + + /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. + * When enabled memory will be training at two different frequencies. + * 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled */ + enum { + SaGv_Disabled, + SaGv_FixedLow, + SaGv_FixedMid, + SaGv_FixedHigh, + SaGv_Enabled, + } SaGv; + + + /* Rank Margin Tool. 1:Enable, 0:Disable */ + uint8_t RMT; + + /* USB related */ + struct usb2_port_config usb2_ports[16]; + struct usb3_port_config usb3_ports[10]; + uint8_t SsicPortEnable; + /* Wake Enable Bitmap for USB2 ports */ + uint16_t usb2_wake_enable_bitmap; + /* Wake Enable Bitmap for USB3 ports */ + uint16_t usb3_wake_enable_bitmap; + + /* SATA related */ + uint8_t SataEnable; + uint8_t SataMode; + uint8_t SataSalpSupport; + uint8_t SataPortsEnable[8]; + uint8_t SataPortsDevSlp[8]; + + /* Audio related */ + uint8_t PchHdaEnable; + uint8_t PchHdaDspEnable; + + /* Enable/Disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1 */ + uint8_t PchHdaAudioLinkHda; + uint8_t PchHdaAudioLinkDmic0; + uint8_t PchHdaAudioLinkDmic1; + uint8_t PchHdaAudioLinkSsp0; + uint8_t PchHdaAudioLinkSsp1; + uint8_t PchHdaAudioLinkSsp2; + uint8_t PchHdaAudioLinkSndw1; + uint8_t PchHdaAudioLinkSndw2; + uint8_t PchHdaAudioLinkSndw3; + uint8_t PchHdaAudioLinkSndw4; + + /* PCIe Root Ports */ + uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; + /* PCIe output clocks type to Pcie devices. + * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use, + * 0xFF: not used */ + uint8_t PcieClkSrcUsage[CONFIG_MAX_ROOT_PORTS]; + /* PCIe ClkReq-to-ClkSrc mapping, number of clkreq signal assigned to + * clksrc. */ + uint8_t PcieClkSrcClkReq[CONFIG_MAX_ROOT_PORTS]; + + /* SMBus */ + uint8_t SmbusEnable; + + /* eMMC and SD */ + uint8_t ScsEmmcHs400Enabled; + /* Need to update DLL setting to get Emmc running at HS400 speed */ + uint8_t EmmcUseCustomDlls; + uint32_t EmmcTxCmdDelayRegValue; + uint32_t EmmcTxDataDelay1RegValue; + uint32_t EmmcTxDataDelay2RegValue; + uint32_t EmmcRxCmdDataDelay1RegValue; + uint32_t EmmcRxCmdDataDelay2RegValue; + uint32_t EmmcRxStrobeDelayRegValue; + + /* Enable if SD Card Power Enable Signal is Active High */ + uint8_t SdCardPowerEnableActiveHigh; + + /* Integrated Sensor */ + uint8_t PchIshEnable; + + /* Heci related */ + uint8_t Heci3Enabled; + + /* Gfx related */ + uint8_t IgdDvmt50PreAlloc; + uint8_t InternalGfx; + uint8_t SkipExtGfxScan; + + uint32_t GraphicsConfigPtr; + uint8_t Device4Enable; + + /* GPIO IRQ Select. The valid value is 14 or 15 */ + uint8_t GpioIrqRoute; + /* SCI IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */ + uint8_t SciIrqSelect; + /* TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */ + uint8_t TcoIrqSelect; + uint8_t TcoIrqEnable; + + /* HeciEnabled decides the state of Heci1 at end of boot + * Setting to 0 (default) disables Heci1 and hides the device from OS */ + uint8_t HeciEnabled; + /* PL2 Override value in Watts */ + uint32_t tdp_pl2_override; + /* Intel Speed Shift Technology */ + uint8_t speed_shift_enable; + /* Enable VR specific mailbox command + * 00b - no VR specific cmd sent + * 01b - VR mailbox cmd specifically for the MPS IMPV8 VR will be sent + * 10b - VR specific cmd sent for PS4 exit issue + * 11b - Reserved */ + uint8_t SendVrMbxCmd; + + /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ + uint8_t eist_enable; + + /* Enable C6 DRAM */ + uint8_t enable_c6dram; + + uint8_t PmTimerDisabled; + + /* Desired platform debug type. */ + enum { + DebugConsent_Disabled, + DebugConsent_DCI_DBC, + DebugConsent_DCI, + DebugConsent_USB3_DBC, + DebugConsent_XDP, /* XDP/Mipi60 */ + DebugConsent_USB2_DBC, + } DebugConsent; + /* + * SerialIO device mode selection: + * PchSerialIoDisabled, + * PchSerialIoPci, + * PchSerialIoHidden, + * PchSerialIoLegacyUart, + * PchSerialIoSkipInit + */ + uint8_t SerialIoI2cMode[CONFIG_SOC_INTEL_I2C_DEV_MAX]; + uint8_t SerialIoGSpiMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + uint8_t SerialIoUartMode[CONFIG_SOC_INTEL_UART_DEV_MAX]; + /* + * GSPIn Default Chip Select Mode: + * 0:Hardware Mode, + * 1:Software Mode + */ + uint8_t SerialIoGSpiCsMode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + /* + * GSPIn Default Chip Select State: + * 0: Low, + * 1: High + */ + uint8_t SerialIoGSpiCsState[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + + /* GPIO SD card detect pin */ + unsigned int sdcard_cd_gpio; + + /* Enable Pch iSCLK */ + uint8_t pch_isclk; + + /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ + enum { + PLATFORM_POR, + FORCE_ENABLE, + FORCE_DISABLE, + } CnviBtAudioOffload; + + /* + * Override GPIO PM configuration: + * 0: Use FSP default GPIO PM program, + * 1: coreboot to override GPIO PM program + */ + uint8_t gpio_override_pm; + + /* + * GPIO PM configuration: 0 to disable, 1 to enable power gating + * Bit 6-7: Reserved + * Bit 5: MISCCFG_GPSIDEDPCGEN + * Bit 4: MISCCFG_GPRCOMPCDLCGEN + * Bit 3: MISCCFG_GPRTCDLCGEN + * Bit 2: MISCCFG_GSXLCGEN + * Bit 1: MISCCFG_GPDPCGEN + * Bit 0: MISCCFG_GPDLCGEN + */ + uint8_t gpio_pm[TOTAL_GPIO_COMM]; +}; + +typedef struct soc_intel_tigerlake_config config_t; + +#endif |