diff options
Diffstat (limited to 'src/soc/intel')
| -rw-r--r-- | src/soc/intel/skylake/Kconfig | 58 | ||||
| -rw-r--r-- | src/soc/intel/skylake/Makefile.inc | 36 |
2 files changed, 1 insertions, 93 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index 1ccde4ab02..ae50bd22c2 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -22,6 +22,7 @@ config CPU_SPECIFIC_OPTIONS select GENERIC_GPIO_LIB select HAS_PRECBMEM_TIMESTAMP_REGION select HAVE_HARD_RESET + select HAVE_INTEL_FIRMWARE select HAVE_MONOTONIC_TIMER select HAVE_SMI_HANDLER select IOAPIC @@ -85,38 +86,6 @@ config DCACHE_RAM_SIZE The size of the cache-as-ram region required during bootblock and/or romstage. -config HAVE_IFD_BIN - bool "Use Intel Firmware Descriptor from existing binary" - default n - -config BUILD_WITH_FAKE_IFD - bool "Build with a fake IFD" - default y if !HAVE_IFD_BIN - help - If you don't have an Intel Firmware Descriptor (ifd.bin) for your - board, you can select this option and coreboot will build without it. - Though, the resulting coreboot.rom will not contain all parts required - to get coreboot running on your board. You can however write only the - BIOS section to your board's flash ROM and keep the other sections - untouched. Unfortunately the current version of flashrom doesn't - support this yet. But there is a patch pending [1]. - - WARNING: Never write a complete coreboot.rom to your flash ROM if it - was built with a fake IFD. It just won't work. - - [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html - -config HAVE_ME_BIN - bool "Add Intel Management Engine firmware" - default y - help - The Intel processor in the selected system requires a special firmware - for an integrated controller called Management Engine (ME). The ME - firmware might be provided in coreboot's 3rdparty/blobs repository. If - not and if you don't have the firmware elsewhere, you can still - build coreboot without it. In this case however, you'll have to make - sure that you don't overwrite your ME firmware on your flash ROM. - config HEAP_SIZE hex default 0x80000 @@ -125,31 +94,6 @@ config IED_REGION_SIZE hex default 0x400000 -config IFD_BIN_PATH - string "Path to intel firmware descriptor" - depends on !BUILD_WITH_FAKE_IFD - default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" - -config IFD_BIOS_SECTION - depends on BUILD_WITH_FAKE_IFD - string - default "" - -config IFD_ME_SECTION - depends on BUILD_WITH_FAKE_IFD - string - default "" - -config IFD_PLATFORM_SECTION - depends on BUILD_WITH_FAKE_IFD - string - default "" - -config ME_BIN_PATH - string "Path to management engine firmware" - depends on HAVE_ME_BIN - default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" - config MMCONF_BASE_ADDRESS hex "MMIO Base Address" default 0xe0000000 diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc index 38668da4b1..d6bc839128 100644 --- a/src/soc/intel/skylake/Makefile.inc +++ b/src/soc/intel/skylake/Makefile.inc @@ -67,40 +67,4 @@ CPPFLAGS_common += -I$(src)/soc/intel/skylake/include # Currently used for microcode path. CPPFLAGS_common += -I3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR) -# Run an intermediate step when producing coreboot.rom -# that adds additional components to the final firmware -# image outside of CBFS -INTERMEDIATE := pch_add_me - -ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) -IFD_BIN_PATH := $(objgenerated)/ifdfake.bin -IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \ - $(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \ - $(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%)) -else -IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH) -endif - -pch_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE) -ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y) - printf "\n** WARNING **\n" - printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n" - printf "Never write a complete coreboot.rom with a fake IFD to your board's\n" - printf "flash ROM! Make sure that you only write valid flash regions.\n\n" - printf " IFDFAKE Building a fake Intel Firmware Descriptor\n" - $(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH) -endif - printf " DD Adding Intel Firmware Descriptor\n" - dd if=$(IFD_BIN_PATH) \ - of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 -ifeq ($(CONFIG_HAVE_ME_BIN),y) - printf " IFDTOOL me.bin -> coreboot.pre\n" - $(objutil)/ifdtool/ifdtool \ - -i ME:$(CONFIG_ME_BIN_PATH) \ - $(obj)/coreboot.pre - mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre -endif - -PHONY += pch_add_me - endif |