summaryrefslogtreecommitdiff
path: root/src/soc/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel')
-rw-r--r--src/soc/intel/skylake/bootblock/pch.c3
-rw-r--r--src/soc/intel/skylake/include/soc/pci_devs.h2
-rw-r--r--src/soc/intel/skylake/include/soc/pm.h3
-rw-r--r--src/soc/intel/skylake/pmc.c39
-rw-r--r--src/soc/intel/skylake/pmutil.c48
5 files changed, 56 insertions, 39 deletions
diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c
index 57b5fedb24..371dd63685 100644
--- a/src/soc/intel/skylake/bootblock/pch.c
+++ b/src/soc/intel/skylake/bootblock/pch.c
@@ -301,6 +301,9 @@ void pch_early_init(void)
/* Program SMBUS_BASE_ADDRESS and Enable it */
enable_smbus();
+ /* Set up GPE configuration */
+ pmc_gpe_init();
+
soc_config_rtc();
enable_heci();
diff --git a/src/soc/intel/skylake/include/soc/pci_devs.h b/src/soc/intel/skylake/include/soc/pci_devs.h
index 476e2c6a56..974f1d8e19 100644
--- a/src/soc/intel/skylake/include/soc/pci_devs.h
+++ b/src/soc/intel/skylake/include/soc/pci_devs.h
@@ -23,7 +23,7 @@
#define _SA_DEVFN(slot) PCI_DEVFN(SA_DEV_SLOT_ ## slot, 0)
#define _PCH_DEVFN(slot, func) PCI_DEVFN(PCH_DEV_SLOT_ ## slot, func)
-#if ENV_RAMSTAGE
+#if ENV_RAMSTAGE && !defined(__SIMPLE_DEVICE__)
#include <device/device.h>
#include <device/pci_def.h>
#define _SA_DEV(slot) dev_find_slot(0, _SA_DEVFN(slot))
diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h
index 235ad898e0..ede3efb982 100644
--- a/src/soc/intel/skylake/include/soc/pm.h
+++ b/src/soc/intel/skylake/include/soc/pm.h
@@ -186,6 +186,9 @@ uint16_t smbus_tco_regs(void);
/* Set the DISB after DRAM init */
void pmc_set_disb(void);
+/* Initialize GPEs */
+void pmc_gpe_init(void);
+
static inline int deep_s3_enabled(void)
{
uint32_t deep_s3_pol;
diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c
index fd04287f37..23a289b2bd 100644
--- a/src/soc/intel/skylake/pmc.c
+++ b/src/soc/intel/skylake/pmc.c
@@ -129,42 +129,6 @@ static void pch_rtc_init(void)
cmos_init(rtc_failed);
}
-static void pmc_gpe_init(config_t *config)
-{
- uint8_t *pmc_regs;
- uint32_t gpio_cfg;
- uint32_t gpio_cfg_reg;
- const uint32_t gpio_cfg_mask =
- (GPE0_DWX_MASK << GPE0_DW0_SHIFT) |
- (GPE0_DWX_MASK << GPE0_DW1_SHIFT) |
- (GPE0_DWX_MASK << GPE0_DW2_SHIFT);
-
- pmc_regs = pmc_mmio_regs();
- gpio_cfg = 0;
-
- /* Route the GPIOs to the GPE0 block. Determine that all values
- * are different, and if they aren't use the reset values. */
- if (config->gpe0_dw0 == config->gpe0_dw1 ||
- config->gpe0_dw1 == config->gpe0_dw2) {
- printk(BIOS_INFO, "PMC: Using default GPE route.\n");
- gpio_cfg = read32(pmc_regs + GPIO_CFG);
- } else {
- gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT;
- gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT;
- gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT;
- }
- gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask;
- gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask;
- write32(pmc_regs + GPIO_CFG, gpio_cfg_reg);
-
- /* Set the routes in the GPIO communities as well. */
- gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT);
-
- /* Set GPE enables based on devictree. */
- enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
- config->gpe0_en_3, config->gpe0_en_4);
-}
-
static void pch_power_options(void)
{
u16 reg16;
@@ -172,7 +136,6 @@ static void pch_power_options(void)
/*PMC Controller Device 0x1F, Func 02*/
device_t dev = PCH_DEV_PMC;
/* Get the chip configuration */
- config_t *config = dev->chip_info;
int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
/*
@@ -207,7 +170,7 @@ static void pch_power_options(void)
printk(BIOS_INFO, "Set power %s after power failure.\n", state);
/* Set up GPE configuration. */
- pmc_gpe_init(config);
+ pmc_gpe_init();
}
static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable)
diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c
index 904be5c2a0..7d83e9f240 100644
--- a/src/soc/intel/skylake/pmutil.c
+++ b/src/soc/intel/skylake/pmutil.c
@@ -19,6 +19,8 @@
* and the differences between PCH variants.
*/
+#define __SIMPLE_DEVICE__
+
#include <arch/io.h>
#include <device/device.h>
#include <device/pci.h>
@@ -27,6 +29,7 @@
#include <halt.h>
#include <rules.h>
#include <stdlib.h>
+#include <soc/gpe.h>
#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
@@ -34,6 +37,7 @@
#include <soc/pm.h>
#include <soc/pmc.h>
#include <soc/smbus.h>
+#include "chip.h"
/* Print status bits with descriptive names */
static void print_status_bits(u32 status, const char *bit_names[])
@@ -465,3 +469,47 @@ void poweroff(void)
if (!ENV_SMM)
halt();
}
+
+void pmc_gpe_init(void)
+{
+ ROMSTAGE_CONST struct soc_intel_skylake_config *config;
+ ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCH_DEVFN_PMC);
+ uint8_t *pmc_regs;
+ uint32_t gpio_cfg;
+ uint32_t gpio_cfg_reg;
+ const uint32_t gpio_cfg_mask =
+ (GPE0_DWX_MASK << GPE0_DW0_SHIFT) |
+ (GPE0_DWX_MASK << GPE0_DW1_SHIFT) |
+ (GPE0_DWX_MASK << GPE0_DW2_SHIFT);
+
+ /* Look up the device in devicetree */
+ if (!dev || !dev->chip_info) {
+ printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n");
+ return;
+ }
+ config = dev->chip_info;
+ pmc_regs = pmc_mmio_regs();
+
+ /* Route the GPIOs to the GPE0 block. Determine that all values
+ * are different, and if they aren't use the reset values. */
+ gpio_cfg = 0;
+ if (config->gpe0_dw0 == config->gpe0_dw1 ||
+ config->gpe0_dw1 == config->gpe0_dw2) {
+ printk(BIOS_INFO, "PMC: Using default GPE route.\n");
+ gpio_cfg = read32(pmc_regs + GPIO_CFG);
+ } else {
+ gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT;
+ gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT;
+ gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT;
+ }
+ gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask;
+ gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask;
+ write32(pmc_regs + GPIO_CFG, gpio_cfg_reg);
+
+ /* Set the routes in the GPIO communities as well. */
+ gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT);
+
+ /* Set GPE enables based on devictree. */
+ enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
+ config->gpe0_en_3, config->gpe0_en_4);
+}